# This script creates the backout package for a patch package
#
# directory format options.
#
#pragma ident	"@(#)postinstall	1.23	08/02/06 SMI"
#
# Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#

# Description:
#       Set the TYPE parameter for the remote file
#
# Parameters:
#       none
#
# Globals set:
#	TYPE
#

POSTINSTALL_ERR_LOG="$PKG_INSTALL_ROOT/var/run/$SUNW_PATCHID.postinstall_log.$$"
RET_STATUS=0

set_TYPE_parameter () {
	if [ ${PATCH_UNDO_ARCHIVE:?????} = "/dev" ]; then
		# handle device specific stuff
		TYPE="removable"
	else
		TYPE="filesystem"
	fi
}

#
# Description:
#       Build the remote file that points to the backout data
#
# Parameters:
#       $1:	the un/compressed undo archive
#
# Globals set:
#	UNDO, STATE

build_remote_file () {
	remote_path=$PKGSAV/$SUNW_PATCHID/remote
	set_TYPE_parameter
	STATE="active"

	if [ $1 = "undo" ]; then
		UNDO="undo"
	else
		UNDO="undo.Z"
	fi

	cat > $remote_path << EOF
# Backout data stored remotely
TYPE=$TYPE
FIND_AT=$ARCHIVE_DIR/$UNDO
STATE=$STATE
EOF
}

PATH=/usr/sadm/bin:$PATH
PATCH_COMMON_LIB="/usr/lib/patch/patch_common_lib"
SAFEMODE_FAILED="Exiting! Patch deferred activation failed"

if [ "$SAFEMODE_INSTALL" = "true" ] ; then
	if [ ! -s "$PATCH_COMMON_LIB" ]; then
		puttext "$SAFEMODE_FAILED"
		exit 1
	fi
	. $PATCH_COMMON_LIB
	InitSafemode || {
		puttext $SAFEMODE_FAILED
		exit 1
	}
fi

if [ "$PKG_INSTALL_ROOT" = "/" ]; then
	PKG_INSTALL_ROOT=""
fi

if [ -n "$PATCH_BUILD_DIR" -a -d "$PATCH_BUILD_DIR" ]; then
	BUILD_DIR="$PATCH_BUILD_DIR/$SUNW_PATCHID.$PKGINST"
else
	BUILD_DIR="$PKG_INSTALL_ROOT/var/tmp/$SUNW_PATCHID.$PKGINST"
fi

if [ ! -n "$PATCH_UNDO_ARCHIVE" ]; then
	PATCH_UNDO_ARCHIVE="none"
fi

FILE_DIR=$BUILD_DIR/files
RELOC_DIR=$FILE_DIR/reloc
ROOT_DIR=$FILE_DIR/root
BO_Deletes=$FILE_DIR/deletes
THIS_DIR=`dirname $0`
PROTO_FILE=$BUILD_DIR/prototype
TEMP_REMOTE=$PKGSAV/$SUNW_PATCHID/temp

if [ "$PATCH_PROGRESSIVE" = "true" ]; then
        # remove the scripts that are left behind
        install_scripts=`dirname $0`
        rm $install_scripts/checkinstall $install_scripts/patch_checkinstall $install_scripts/patch_postinstall

	# If this is being used in an old-style patch, insert
	# the old-style script commands here.

	#XXXOld_CommandsXXX#

	exit 0
fi

#
# At this point we either have a deletes file or we don't. If we do,
# we create a prototype entry.
#
if [ -f $BO_Deletes ]; then
	echo "i deletes=$BO_Deletes" >> $BUILD_DIR/prototype
fi

if [ -f $BUILD_DIR/pkginfo ] ; then
	/usr/bin/grep "^SUNW_PATCH_SAFE_MODE=" $SCRIPTS_DIR/../pkginfo >> \
	    $BUILD_DIR/pkginfo
fi 

#
# Now delete everything in the deletes list after transferring
# the file to the backout package and the entry to the prototype
# file. Remember that the pkgmap will get the CLIENT_BASEDIR path
# but we have to actually get at it using the BASEDIR path. Also
# remember that removef will import our PKG_INSTALL_ROOT
#
# If this is a safemode patch package and it has a deletes file in it
# then handle the deletion of an object for safemode patching.
#
Our_Deletes=$THIS_DIR/deletes
if [ -f $Our_Deletes ]; then
	cd $BASEDIR

	PSPOOL_DIR="/var/sadm/pkg/$PKGINST/save/pspool/$PKGINST/install"
	cat $Our_Deletes | while read path; do
		# If this patch is deleting any pspool script, then the
		# deleted file would have any entry for the script
		# relative to the PKG_INSTALL_ROOT. We have to parse it
		# and process it as follows.
		#       1) build the complete path.
		#       2) move the file to undo package.
		#       3) Add it to the prototype file of undo package.
		Dir=`/usr/bin/dirname $path`
		if [ "$Dir" = "$PSPOOL_DIR" ]; then
			path="${PKG_INSTALL_ROOT:-/}$path"
			if [ -f $path ]; then
				filename=`/usr/bin/basename $path`
				spoolname="pkg_$filename"
				spoolfile="$FILE_DIR/$spoolname"
				mv -f $path $spoolfile
				echo "i $spoolname=$spoolfile" >> $BUILD_DIR/prototype
			fi
			continue;
		fi
		Reg_File=0

		if valpath -l $path; then
			Client_Path="$CLIENT_BASEDIR/$path"
			Build_Path="$RELOC_DIR/$path"
			Proto_Path=$BASEDIR/$path
		else	# It's an absolute path
			Client_Path=$path
			Build_Path="$ROOT_DIR$path"
			Proto_Path=$PKG_INSTALL_ROOT$path
		fi

		# If BASEDIR/CLIENTBASEDIR = "/", then the previous prepends
		# an extra / i.e. //. The sed command later can't find a
		# Proto_Path with // and therefore will not substitute the
		# correct build_Path resulting in the backout pkg not being
		# created.

		if [ "$CLIENT_BASEDIR" = "/" ]; then
			Client_Path=`echo $Client_Path | sed 's|^\/\/|\/|'`
			Proto_Path=`echo $Proto_Path | sed 's|^\/\/|\/|'`
		fi
			
		# Note: If the file isn't really there, pkgproto
		# doesn't write anything but displays an error
		# so check for the file before processing.

		if [ -f "$Proto_Path" ]; then
			LINE=`pkgproto $Proto_Path=$path`
		else
			continue
		fi

		ftype=`echo $LINE | nawk '{ print $1 }'`
		if [ "$ftype" = "f" ]; then
			Reg_File=1
		fi

		if [ $Reg_File = 1 ]; then
			# Add source file to the prototype entry
			if [ "$Proto_Path" = "$path" ]; then
				LINE=`echo $LINE | sed -e "s|$Proto_Path|$Build_Path|2"`
			else
				LINE=`echo $LINE | sed -e "s|$Proto_Path|$Build_Path|"`
			fi

			DirName=`dirname $Build_Path`
			# make room in the build tree
			mkdir -p $DirName
			cp -p $Proto_Path $Build_Path
		fi

		# Insert it into the prototype file
		echo $LINE 1>>$PROTO_FILE 2>/dev/null
		
		if [ "$SAFEMODE_INSTALL" = "true" ]; then
			# Handle deletion of an object for safemode patching
			HandleSafemodeDeleteObject $PKGINST $Client_Path
		else
			# Remove the file only if it's OK'd by removef
			rm `/usr/sbin/removef $PKGINST $Client_Path` 1>/dev/null 2>&1
		fi

	done
	/usr/sbin/removef -f $PKGINST

	rm $Our_Deletes
fi

#
# Unless specifically denied, make the backout package.
#
if [ "$PATCH_NO_UNDO" != "true" ]; then
	cd $BUILD_DIR	# We have to build from here.

	if [ "$PATCH_UNDO_ARCHIVE" != "none" ]; then
		STAGE_DIR="$PATCH_UNDO_ARCHIVE"
		ARCHIVE_DIR="$PATCH_UNDO_ARCHIVE/$SUNW_PATCHID/$PKGINST"
		mkdir -p $ARCHIVE_DIR
		mkdir -p $PKGSAV/$SUNW_PATCHID
	else
		if [ -d $PKGSAV/$SUNW_PATCHID ]; then
			rm -r $PKGSAV/$SUNW_PATCHID
		fi
		STAGE_DIR=$PKGSAV
		ARCHIVE_DIR=$PKGSAV/$SUNW_PATCHID
		mkdir $ARCHIVE_DIR
	fi

	ERR_LOG_DIR=`dirname $POSTINSTALL_ERR_LOG`
	if [ ! -d $ERR_LOG_DIR ]; then
		mkdir -p $ERR_LOG_DIR
	fi

	/usr/bin/pkgmk -o -d $STAGE_DIR 1>$POSTINSTALL_ERR_LOG 2>&1
	retcode=$?
	if [ "$retcode" != 0 ]; then
		echo "pkgmk(1) failed with error code $retcode" >> $POSTINSTALL_ERR_LOG
		echo "The $PKGINST backout package will not get created" >> $POSTINSTALL_ERR_LOG
		RET_STATUS=1
	else
		/usr/bin/pkgtrans -s $STAGE_DIR $ARCHIVE_DIR/undo $PKG 1>>$POSTINSTALL_ERR_LOG 2>&1
		retcode=$?
		if [ "$retcode" != 0 ]; then
			echo "pkgtrans(1) failed with error code $retcode" >> $POSTINSTALL_ERR_LOG
			echo "The $PKGINST backout package will not get created" >> $POSTINSTALL_ERR_LOG
			RET_STATUS=1
		else
			compress $ARCHIVE_DIR/undo
			retcode=$?
			if [ "$retcode" != 0 ]; then
				echo "compress(1) returned error code $retcode"
				echo "The $PKGINST backout package will not be compressed."
				echo "Continuing to process backout package."
			fi
			if [ "$PATCH_UNDO_ARCHIVE" != "none" ]; then
				if [ $retcode != 0 ]; then
					build_remote_file "undo"
				else
					build_remote_file "undo.Z"
				fi
			fi
		fi
	fi

	rm -r $STAGE_DIR/$PKG

	cd ..
	rm -r $BUILD_DIR
	# remove the scripts that are left behind
	install_scripts=`dirname $0`
	rm -f $install_scripts/checkinstall $install_scripts/patch_checkinstall $install_scripts/patch_postinstall $install_scripts/pkg_*
fi

#
# Since this apparently worked, we'll mark as obsoleted the prior
# versions of this patch - installpatch deals with explicit obsoletions.
#
cd ${PKG_INSTALL_ROOT:-/}
cd var/sadm/pkg

active_base=`echo $SUNW_PATCHID | nawk '
	{ print substr($0, 1, match($0, "-")-1) } '`

List=`ls -d $PKGINST/save/${active_base}* 2>/dev/null`
if [ $? -ne 0 ]; then
	List=""
fi

for savedir in $List; do
        patch=`basename $savedir` 
        if [ $patch = $SUNW_PATCHID ]; then
		break
	fi

        # If we get here then the previous patch gets deleted
	if [ -f $savedir/undo ]; then
		mv $savedir/undo $savedir/obsolete
		echo $SUNW_PATCHID >> $savedir/obsoleted_by
	elif [ -f $savedir/undo.Z ]; then
		mv $savedir/undo.Z $savedir/obsolete.Z
		echo $SUNW_PATCHID >> $savedir/obsoleted_by
        elif  [ -f $savedir/remote ]; then
                `grep . $PKGSAV/$patch/remote | sed 's|STATE=.*|STATE=obsolete|' > $TEMP_REMOTE` 
                rm -f $PKGSAV/$patch/remote 
                mv $TEMP_REMOTE $PKGSAV/$patch/remote  
                rm -f $TEMP_REMOTE 
                echo $SUNW_PATCHID >> $savedir/obsoleted_by
	elif  [ -f $savedir/obsolete -o -f $savedir/obsolete.Z ]; then
		echo $SUNW_PATCHID >> $savedir/obsoleted_by
	fi
done

if [ "$RET_STATUS" != 0 ]; then
	cat $POSTINSTALL_ERR_LOG
	echo "Execution of postinstall encountered problems"
	echo "postinstall exited with 1"
	rm -f $POSTINSTALL_ERR_LOG
	exit $RET_STATUS
else
	rm -f $POSTINSTALL_ERR_LOG
fi

# If additional operations are required for this package, place
# those package-specific commands here.

#XXXSpecial_CommandsXXX#

#!/sbin/sh

#
# Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
#ident	"@(#)postinstall	1.138	07/09/13 SMI"
#

#
# postinstall script for SUNWos86r package.
#
	
# check_add_drv() checks if the module has an entry in
# etc/name_to_major.  If not, it simply calls add_drv with the arguments
# given. If there is such an entry in name_to_major file, it adds
# entries in driver_aliases driver_classes and minor_perm if necessary.
# The syntax of this function is the same as add_drv.

check_add_drv()
{
	basedir=/
	alias=""
	class=""
	ADD_ALIAS=0
	ADD_CLASS=0
	ADD_MINOR=0
	OPTIND=1
	IS_NET_DRIVER=0

	cmd="add_drv"

	while getopts i:b:m:c:n  opt
	do
		case $opt in
			i )	ADD_ALIAS=1	
				alias=$OPTARG
				cmd=$cmd" -i '$alias'"
				;;
			m )	ADD_MINOR=1
				minor=$OPTARG
				cmd=$cmd" -m '$minor'"
				;;
			c)	ADD_CLASS=1
				class=$OPTARG
				cmd=$cmd" -c $class"
				;;
			b)	basedir=$OPTARG
				cmd=$cmd" -b $basedir"
				;;
			n)	IS_NET_DRIVER=1
				;;
			\?) 	echo "check_add_drv can not handle this option"
				return
				;;
			esac
	done 
	shift `/usr/bin/expr $OPTIND - 1`
	
	drvname=$1

	cmd=$cmd" "$drvname

	drvname=`echo $drvname | /usr/bin/sed 's;.*/;;g'`

	/usr/bin/grep "^$drvname[ 	]" $basedir/etc/name_to_major >  /dev/null 2>&1

	if [ $? -ne 0 ] 
	then
		eval $cmd
	else	
		# entry already in name_to_major, add alias, class, minorperm
		# if necessary
		if [ $ADD_ALIAS = 1 ]	
		then
			for i in $alias
			do
				/usr/bin/egrep "^$drvname[ 	]+$i" $basedir/etc/driver_aliases>/dev/null 2>&1
				if [ $? -ne 0 ]
				then
					echo "$drvname $i" >> $basedir/etc/driver_aliases	
				fi
			done
		fi

		if [ $ADD_CLASS = 1 ]
		then
			/usr/bin/egrep "^$drvname[ 	]+$class( |	|$)" $basedir/etc/driver_classes > /dev/null 2>&1
			if [ $? -ne 0 ]
			then 
				echo "$drvname\t$class" >> $basedir/etc/driver_classes
			fi
		fi

		if [ $ADD_MINOR = 1 ]
		then
			/usr/bin/grep "^$drvname:" $basedir/etc/minor_perm > /dev/null 2>&1
			if [ $? -ne 0 ]
			then 
				minorentry="$drvname:$minor"
				echo $minorentry >> $basedir/etc/minor_perm
			fi
		fi

	fi

	# The following clone device/dev is needed for Custom Jumpstart

	if [ $IS_NET_DRIVER -eq 1 ]
	then
		CLONE_DEVICE=devices/pseudo/clone@0:$drvname
		set `/usr/bin/grep "^clone[ 	]" $basedir/etc/name_to_major`
		CLONE_MAJ=$2
		set `/usr/bin/grep "^$drvname[ 	]" $basedir/etc/name_to_major`
		DRIVER_MAJ=$2
		mknod $basedir/$CLONE_DEVICE c $CLONE_MAJ $DRIVER_MAJ
		chmod 600 $basedir/$CLONE_DEVICE
		chgrp sys $basedir/$CLONE_DEVICE
		chown root $basedir/$CLONE_DEVICE
		ln -s ../$CLONE_DEVICE $basedir/dev/$drvname
	fi
	
}


# check_rem_drv() checks if the module has an entry in
# etc/name_to_major.  If so, it simply calls rem_drv with the arguments
# given to remove the driver from the system.  The syntax of this
# function is the same as rem_drv.

check_rem_drv()
{
	basedir=/
	OPTIND=1

	cmd="rem_drv"

	while getopts b: opt
	do
		case $opt in
			b)	basedir=$OPTARG
				cmd=$cmd" -b $basedir"
				;;
			\?) 	echo "check_rem_drv can not handle this option"
				return
				;;
			esac
	done 
	shift `/usr/bin/expr $OPTIND - 1`
	
	drvname=$1

	cmd=$cmd" "$drvname

	drvname=`echo $drvname | /usr/bin/sed 's;.*/;;g'`

	/usr/bin/grep "^$drvname[ 	]" $basedir/etc/name_to_major >  /dev/null 2>&1

	if [ $? -eq 0 ] 
	then
		eval $cmd
	fi
}

#
# Update entries in the /etc/driver_classes for drivers which change
# from class "scsi" to class "dada".
#
drvclasses_updates()
{
	nawk "
	BEGIN {
	  #  Drivers in class "dada"
	  drv[\"chs\"] = 1
	  }
	/^#/ || /^$/ {
	  print
	  next
	  }

	# Advertise the direct-attach drivers as class "dada" 

	drv[\$1] > 0 {
	  \$2 = \"dada\"
	  }
	{ printf \"%s\t%s\n\", \$1, \$2 }" ${BASEDIR}/etc/driver_classes > /tmp/d.$$

	cp /tmp/d.$$ ${BASEDIR}/etc/driver_classes
	rm /tmp/d.$$
}

# Platform-specific drivers
case "${ARCH}" in
i386)
	drvclasses_updates
	check_add_drv -b "${BASEDIR}" \
		-i '"pci1011,2" "pci1011,9" "pci1011,14" "pci1011,19" "pci1109,1400" "pci1109,2400" "pci10b8,2001" "pci2646,1"' \
		dnet
	check_add_drv -b "${BASEDIR}" -i \
		'"pci10b7,9000" "pci10b7,9001" "pci10b7,9004" "pci10b7,9005" "pci10b7,9006" "pci10b7,9050" "pci10b7,9051" "pci10b7,9055" "pci10b7,9056" "pci10b7,9200" "pci10b7,9800" "pci10b7,9805"' \
		elxl
	check_add_drv -b "${BASEDIR}" \
		-i '"pci1022,2000" "pci103c,104c"' \
		pcn
	check_add_drv -b "${BASEDIR}" \
		-i '"pci1011,21" "pci1014,22"' \
		pci_pci
	check_add_drv -b "${BASEDIR}" \
		-c scsi \
		-i '"pci1022,2020"' \
		pcscsi
	check_add_drv -b "${BASEDIR}" \
		-c dada -i '"pci1014,2e"' \
		chs
	check_add_drv -b "${BASEDIR}" \
		-c scsi \
		-i '"pci1000,1" "pci1000,2" "pci1000,3" "pci1000,4" "pci1000,6" "pci1000,c" "pci1000,f" "pci1000,8f" ' \
		ncrs
	check_add_drv -b "${BASEDIR}" \
		-i '"pci8086,1029" "pci8086,1229" "pci8086,1229.8086.1009" "pci8086,1229.8086.100c" "pci8086,1229.8086.1012" "pci8086,1229.8086.1013" "pci8086,1229.8086.1015"	"pci8086,1229.8086.1016" "pci8086,1229.8086.1017" "pci8086,1030" "pci8086,1031" "pci8086,1032" "pci8086,1038" "pci8086,1039" "pci8086,103d" "pci8086,2449"' \
		iprb
	check_add_drv -b "${BASEDIR}" \
		-i '"pci10b8,5"' \
		spwr

	# The sd driver should be installed to the system before rcs9.sh
	# is called.
	check_add_drv -b "${BASEDIR}" \
		-m '* 0640 root sys' \
		-i '"scsiclass,00" "scsiclass,05"' \
		sd
	
# Commented out for patching context
#	# Call the rcs9.sh script to update necessary files in case of upgrade
#	# for the PCI physical device pathname change from 2.4.
#	#
#	# Also used to preserve escd.rf (devconf configuration information)
#	# saved on floppy during an install boot.
#	#
#
#	if [ -s /tmp/diskette_rc.d/rcs9.sh ] 
#	then
#		/sbin/sh /tmp/diskette_rc.d/rcs9.sh "post"
#	fi
	
# Commented out for patching context
#	#
#	# If there is no data in OWconfig, remove it.
#	#
#	OWC=/etc/openwin/server/etc/OWconfig
#	removef $PKGINST $OWC |\
#	while read pathname
#	do
#		if [ ! -s $pathname ]; then 
#			echo Removing empty `basename $pathname`
#			rm -f $pathname
#		fi
#	done	
#	removef -f $PKGINST

	;;
esac

# Remove erroneous entry for Symbios Logic 53c875/95 (ncrs)
TMPFILE=/tmp/ncrs_tmp
sed -e '/^ncrs "pci1000,1000"$/d' ${BASEDIR}/etc/driver_aliases >$TMPFILE
cp $TMPFILE ${BASEDIR}/etc/driver_aliases

exit 0
