   PRINT2  v4.2   Corrected Re-Assigment of Drive and Directory when you
                  quit the program. It will now restore the drive and directory
                  that you started the program from.

   PRINT2  v4.1   NOW FREEWARE!   REASON?   The printer industry can't
                  decide on a standard for Printer ESC Codes which makes
                  it IMPOSSIBLE for a programmer to create a program to
                  handle every type of printer out there.  So, Rather than
                  scrap PRINT2 from the books, I decided to release it "AS
                  IS" as Freeware.  Of Course, Donations for the Program
                  will always be accepted.   Over the 4 years this program
                  was released, I have had a few users who help support it
                  and probably got this program working properly.
                  Basically, Version 4 or above is FREEWARE as stated.
                  If you can use it, Fine, if not, Delete it.  It is FREE
                  which also makes it No Bitch-ware too.
                  This release adds the capability of you to Select a HD
                  Drive when the program first starts up. From there, you
                  can choose your Directory and filename to print.

   PRINT2  v4.0   Had a bug with accessing the Printer port.

   PRINT2  v3.x   Last of the Shareware product line.  Use of this version
                  requires a registration fee.

   PRINT2  v3.5   Fixed a Bug with the HLP file not showing up when not
                  using the SET PRINT2 statement.  Fixed a problem with the
                  DeskJet mode and Margin Settings.   Limited the SOUND to
                  ERRORS and only when the Printing is finished. This way
                  you could walk away and just wait for the whistle to let
                  ya know it was done printing.

   PRINT2  v3.4   Cleaned up Sound Effects a bit.  FIDO ADDRESS CHANGED to
                  1:2614/716.  Please Note this.  FREQ PRINT2 from FidoNet

   PRINT2  v3.3   In LaserJet Mode, Move the Page text down 1 line to
                  Clear Top Margin.

   PRINT2  v3.2   Added support for LEGAL SIZE paper /L and  A4 Size paper
                  /A4  for DESKJET and LASERJET PRINTERS ONLY!!!  The
                  laserjet and deskjet mode prints the document in 2 column
                  LANDSCAPE mode so with the /A4 switch added this will
                  adjust the margins and layout of the page for these types
                  of paper.  (Sorry DotMatrix users, You are stuck in
                  portrait mode printing).

   PRINT2  v3.1   Added an Environment variable so that you can PUT
                  PRINT2 in a directory other than the Root Directory.
                  SET PRINT2=C:\xxxxxxx   where C:\xxxx is Drive and dir.
                  (required when using this).  FIXed the DESKJET Printing
                  Mode. Now Prints in LANDSCAPE mode for DESKJETs and the
                  LaserJet printers.  (sorry dot matrix users!).  The program
                  now draws a Dividing line down the page to separate the 2.

                  See Information for 3.0Beta for more fixes.

   PRINT2  v3.0  Added full support for DESKJET Series printers without
                  the need for an additional cartridge.  Fixed a problem
                  in LASERJET mode with a CR/LF combination not being sent
                  all the time to terminate the lines.  Full support now
                  enabled for DOTMATRIX which seems to work just fine.
                  DESKJET MODE Page shortened to 58 lines per page to
                  allow LANDSCAPE mode Printing on the Page which is much
                  nicer.  Landscape ALLOWS you to put 3 Hole Punch Paper
                  in the tray to make your docs BINDER READY.  Enjoy!
                  3.0 was NOT officially release, Just BETA Test.
                  Version 2.x was a DISASTER!  MANY UnExpected BUGS!
                  So, Version 2.x is a write off. Version 3.x fixed alot.
                  Plus added the DESKJET Landscape Mode Printing!

   PRINT2  v2.4   Added the DESKJET codes. Now you can use PRINT2 with
                  Dot Matrix, Laserjets, or Deskjet printers.
                  I have also changed the array sequence again for the
                  Dot Matrix mode/DeskJet mode. Some eroneous characters
                  were appearing at the beginning of the lines.

   PRINT2  v2.3   BUG Fixed in DOTMATRIX Mode.  Fixed array size which
                  caused a Form Feed character to be mixed in at the end
                  of each line.  Dont know why it got there, didnt have it
                  in version 2.1, but it is fixed now.   Just blame the
                  programmer!

   PRINT2  v2.2   Minor changes,  No change in Function of program.
                  Just added an Alarm after it is done printing for
                  when you print those documents and walk away.
                  Also, I clarified the PRINT2 ERROR Screens to inform
                  user that the PRINT2 Files MUST be located in the C:\
                  (Root Directory of C: DRIVE).  This way you can run
                  it from anywhere!!  Just keep C:\ in your PATH statement.

   PRINT2  v2.1   I made PRINT2 look for its .CFG and .HLP file at
                  C:\   (the Root directory!)  I did this so that you
                  can run PRINT2 from any drive, anywhere as long as you
                  have the C:\  in your PATH statement.
                  Print2 now returns to the PICK a FILE window after
                  completion of the printout to continue.  Batch MODE
                  is still supported by running PRINT2 <Filename> from
                  the command line. It will print and just exit.

   PRINT2  v2.0   Now has a Graphical User Interface pick and click
                  file routine.  Mouse Support, as well as graphical
                  windows, Online Help, And now supporting LASERJET
                  as well as DOT MATRIX PRINTERs!!!!  SHAREWARE version.
                  Registration is only $15.00 US


   PRINT2  v1.1   Freeware Version.. Just supported LASERJET printers.
                  Limited graphic support, no WINDOWS, TEXT mode.
                  Works really well for just LASERJET printers.
                  No file picking window. NO Mouse.  Freeware.
