  INTRODUCTION

  Thank you for inquiring about Spin Stats Version 4.00.  We feel that after 
  using the Spin Stats demo, you will find it to be the perfect tool for your
  fantasy baseball league.  Its flexibility and ease-of-use make the chore of
  being league commissioner a breeze.  Spin Stats was considered to be "the 
  best of the dozens of stat-keeping programs" by Fantasy Baseball Magazine.
  It allows you to select from numerous point categories and each league that
  you run is separately "customizable".

  The Spin Stats demo allows you to see all of the full product's power and 
  flexibility with the following exceptions:

  o You may create only one league for yourself.  The complete version of 
    Spin Stats allows you to run thousands of leagues.  In addition, a demo 
    league has already been set up for you in order to allow you to 
    immediately see the numerous reports that Spin Stats makes available to
    you.  

  o You are limited to only 4 teams within a league.  The complete version
    allows thousands of teams per league.

  o You are limited to only 8 players on each team.  The complete version 
    allows thousands of players per team.

  o The complete version comes with a very comprehensive manual to guide you
    through your season from start to finish.

  Questions & Answers

  If you have any questions regarding this demo, feel free to contact us at 
  Faulkner Strategics.  There are several methods of contacting us.  

  o You may a leave question via our electronic bulletin board.  This BBS is 
    on-line 24 hours a day, seven days a week.  With this system, you may 
    leave questions and they will usually be answered within 24 hours.  You
    may also place orders through this BBS.  The number to the BBS is 
    (404) 908-1607.    

  o Another method of contacting us is via the fax machine.  You may send us
    a fax at (404) 378-7279.  You may send faxes 24 hours a day and they will
    also be responded to within 24 hours.  

  o Third, you may contact Faulkner Strategics directly.  Our normal working
    hours are 10am to 6pm, Monday-Friday, Eastern Standard time.  Our number
    is (404) 378-7279.




  WHY USE SPIN STATS?

  If you have had to keep track of your fantasy league statistics either 
  manually or by a spreadsheet method, then you know how tremendous a chore
  it can be.  You must keep track of hundreds of players which may or may 
  not need unique calculations done to their statistics in order to figure
  out partial statistics.  Spin Stats takes care of all of this for you.  
  You simply enter in the players, make roster moves throughout the season,
  enter the player's current statistics (either manually or with a modem) 
  and Spin Stats does the rest.  And you don't have to be a computer expert
  by any means in order to use Spin Stats.  It has self-explanatory light-
  bar menus and on-line help throughout in order to guide you through.

  Spin Stats places all of the power and control in your hands.  You have 
  your choice of many different point categories to keep track of and if 
  Spin Stats does not include a category that you want, you can create it.
  You don't have to rely on expensive stat services to get your reports.  
  These services usually make you play by their rules and keep you waiting
  for your reports to come in the mail.  With Spin Stats, you can make 
  roster moves when you want, update your statistics when you want and print
  your reports when you want.

  Considering its ease of use, complete list of features and low price 
  ($59.95), Spin Stats is the best value in fantasy baseball league software
  products.


  A QUICK GUIDE THROUGH SPIN STATS

  The following discussion will guide you through some scenarios of running
  a league using Spin Stats.  Follow these steps to see how easy it is to 
  run your league using Spin Stats.  This short guide will give you a feel
  for how Spin Stats works and what you can do with it.  Please take the 
  time to go through this guide and then feel free to play around with the
  entire system.

  Let's begin the guide!

  o Run Spin Stats by typing SSDEMO from the Spin Stats demo directory.
  o If this is the first time that you have run the demo, there will be an
    item that Spin Stats will ask you to set up.  This will only occur this
    one time and will never occur again.  The item that Spin Stats will ask
    you to tell it is what type of computer you have.  This is only needed
    to set the speed of the opening screen properly.  Answering this 
    incorrectly will not effect anything except that the opening screen may
    be created slowly.  If the opening screen gets created too slowly, go
    into 'System Options' and lower the value of the CPU speed field.  
    Simply highlight the correct computer type and press [RETURN].  If you
    are unsure of which computer type to select, select  the "386 - 80386 
    Processor'.  Again, this will only happen this one time and will not 
    happen again.

    NOTE:  If you have a 5 1/4" diskette version of the Spin Stats Demo or
    if you downloaded the demo from our BBS system, the indexes to the data
    files do not yet exist.  Therefore, there will be a second thing that 
    happens this one time only.  Once you have selected your computer type,
    Spin Stats will create the data file indexes.  This will take a short 
    moment and will only occur this one time.

  o This will bring you to the opening screen asking you to either enter a
    date or confirm the provided date.  This date is very important!  Spin
    Stats stamps roster moves with this date.  No matter what the computer
    system's date is, Spin Stats uses this opening screen's date so that 
    you can go back and make roster moves that you may have missed and have
    Spin Stats use the correct date for that roster move, etc.  For example,
    if it is August 5th and you need to go back and enter in a roster move
    that you forgot to do on July 26th, simply enter this date as '07/26/93'
    and the roster move will be dated properly.
  o Change the date to 05/16/93 and press [RETURN].
  o This will bring you to the opening Spin Stats menu.

  Let's enter into a league and do some weekly processing, such as roster
  moves and reports.

  o  Select "Enter Into League" to bring up a list of leagues.  Select 
     "SPIN STATS DEMO LEAGUE".  This will enter you into the "SPIN STATS
     DEMO LEAGUE" and bring you to another menu.  Here you will have 
     access to all of the features you will need in order to run this league.

  At this time, we would like to add Deion Sanders to a team called the BASE
  RAPS.  Since in this example the baseball season is under way, we will 
  want beginning stats to be entered for Deion when he gets added to the 
  roster so that his stats will begin accumulating for the BASE RAPS from
  that point forward.

  o Select the "Player Transactions" menu choice.  This will bring up a list
    of teams to work on.  Select the "BASE RAPS".
  o Select the "Add a Player to the Roster" menu choice.  You will see a 
    screen of options before you get into the player addition routine.  This
    screen will ask you 3 questions: Do you want to use a downloaded file to
    pick players from?; Do you want to pull the stats from this file as 
    startup stats?; and Which downloaded file do you want to use?
  o Select the "Change Options" selection.  This allows you to change the
    above options.  Answer "Y" for the first two questions and then hit the
    F2 key to popup a list of downloaded files.  Select the download file 
    dated 05/16/93.
  o Select the "Continue on to Routine" selection.
  o At the "Player" prompt, press F2 to get a popup list of players to 
    select from.
  o Begin typing SANDERS, D.  You will see the highlight bar move to the 
    player starting with the letters that you type.  When Deion Sanders is
    highlighted, press [RETURN].
  o A list of positions will come up.  Type the letter 'O'.  This will 
    highlight the position "OF-Outfield".  Press [RETURN].
  o A list of major league teams will popup with this player's major league
    team highlighted, in this case the Atlanta Braves.  Press [RETURN].
  o The player's on-line name will be automatically placed into the 
    "On-line" field.  For this demo, the system options are set up to make
    the match with the on-line service by a combination of major league 
    team and on-line name.  This option could be set to match by player ID
    number.  In that case, you would see the ID number in the "On-line" 
    field.  Press [RETURN] to continue.
  o Then you will be prompted to enter in "Miscellaneous" information and 
    "Salary" information.  Simply enter something in these fields and press
    [RETURN] or leave the field blank by pressing [RETURN] without entering
    anything.
  o You will see a message at the bottom of the screen that says "Stats 
    pulled from on-line file".  Then the player's stats will appear on the
    screen.  The stats that you see on the screen will be the starting up 
    stats for Deion Sanders and they will not count for this team.  Stats 
    will begin accumulating for this team from this point forward.  A 
    message will appear at the bottom of the screen asking you if you need
    to enter previous statistics or not.  Since the stats were pulled from
    the file, there is no need to manually enter the previous stats, so 
    type 'N'.  If stats were not pulled or you were doing stats manually,
    you would want to enter 'Y' and type in the starting up stats.  At this
    time, enter 'N'.
  o You will then have 3 choices:  "Edit Input", "Save Input", or "Abandon 
    Input".  Since the information entered is correct, type "S" to save or 
    highlight the "Save Input" choice and press [RETURN] to save.
  o You are now back at the "Player" prompt and are ready to enter another
    player.  Simply press [RETURN] to return to the menu.

  This concludes the example of entering a new player to the team in the
  middle of the season.  Now let's go and drop a player from a roster.  We
  will drop Mariano Duncan off of PHIL'S PHLEDGLINGS' roster.

  o First we need to change the team that we are working with.  If you 
    notice, at the top of the menu box is the current team that we are 
    working with and it says "Base Raps".  Type "S" or highlight "Switch to 
    Another Team" and press [RETURN].  This will bring up a list of teams 
    to choose from.
  o Select "Phil's Phledgings" and press [RETURN].  Notice the team name 
    change at the top of the menu box.
  o Select the "Drop a Player from the Roster" menu choice.
  o At the "Player" prompt, press F2 to get a list of players to pick from.
  o Type the letter 'D' to go to the first player that starts with a 'D'.  
    Highlight "Duncan, M" and hit [RETURN].
  o You will see the question "Do you need to update this player's 
    statistics before dropping?".  This is giving you the opportunity to
    update the player's current major league stats before dropping him off
    of the active roster.  At this time, type "N".
  o A list of statuses will appear for you to choose from.  This player will
    be stamped with this transaction status.  Based on this status and how 
    it is set up in league maintenance, a value will be charged to the team
    for this transaction and the stats while active on this roster will 
    count toward the team totals.  Please refer to the league maintenance
    menu choice called "Status Maintenance" for further details.  At this
    time, select "d - Disabled".
  o Now you will be given a choice to enter "D" to drop the player or "E"
    to end without dropping.  Type "D".
  o At the "Player" prompt, press [RETURN] to exit

  This concludes dropping a player from the roster.  Now let's go on and
  look at some reports for this league.

  o Select "Quit to Team Menu"
  o Select "Print Reports"

  First, we will look at the report of player statistics for all of the 
  team's.

  o Select "All Players' Statistics"
  o You will be prompted for a print destination.  Select "SCREEN" to send
    the report to the screen.
  o You will then see a screen full of report options.  Take time to look 
    over these options to see what is available for you to modify in order
    to create the report that you would like to see for your league.  If 
    you would like to change any option, select "Change Options".  When you
    are ready to see the report, select "Print Report".
  o After Spin Stats generates the report, it will appear on the screen.  
    You may use the arrow keys along with the "Page Up" and "Page Down" 
    keys to navigate through the entire report.  When you are finished 
    viewing the report, type "Q" to quit.

  Now let's look at the league standings.

  o Select "League Standings"
  o You will be prompted for a print destination.  Select "SCREEN" to send
    the report to the screen.
  o You will then see a screen full of report options for this report also.
    When you are ready to see the report, select "Print Report".

  That's the end of the Quick Guide.  This guide should have given you a 
  feel for how Spin Stats operates and how it can help you run your league
  quickly and easily.  Please take the time to look over the rest of the 
  Spin Stats system to see its many powerful features.


  SPIN STATS DEMO MENU SELECTIONS

  This is not the full manual that you will receive when you purchase Spin
  Stats.  Instead, what follows is a quick list, in alphabetical order, of
  every menu selection in the Spin Stats system and what it does.  Please 
  take a look at the entire Spin Stats system and see the power and 
  flexibility that it gives the league commissioner.


  ABOUT SPIN STATS  
  This selection simply gives you information about the product you are
  running.

  ADD A PLAYER TO THE ROSTER                                                                                                                                      
  This selection allows you to add a new player to the roster.  Through this
  selection you may add a player at the beginning of the season or you may
  enter a player who has already generated some statistics.  If he has 
  already generated some statistics, the statistics up to the time of the
  addition to the roster will not count towards that roster's totals.                                         

  ADD, EDIT, & DELETE PRINTER                                                                                                                                     
  This selection allows you to maintain printer information.  You can add
  new printers to the system, change an existing printer's information, and
  delete a  printer from the system.                                                        

  ADD LEAGUE
  This selection allows you to add leagues to the system.  Spin Stats can 
  handle numerous leagues at a time.  When you add a league, you will be 
  asked: what type of league that you want to run; which point categories
  you would like to track; if you want to attach on-line service names to
  your players; if you want to attach major league team names to your 
  players; and if you want to set roster limits.

  ADD, EDIT, AND DELETE TEAMS
  This selection allows you to maintain team information within the current
  league.  You may maintain team owner information including name and 
  address, phone numbers, and how much an owner has paid.  You may also
  instruct Spin Stats to generate the amount owed and the salary total for
  this team.
  
  ADJUST A PLAYER'S TRANSACTION                                                                                                                                   
  This selection allows you to correct any wrong roster moves that are 
  mistakenly made.  This selection will show you each transaction that has
  been made for a player and allows you to delete the transaction in order 
  to bring a player back to the proper status.  Occasionally, you will also
  need to go and update the player's current statistics again if you have 
  deleted an inactive transaction to make the player active again.  Also, 
  through this selection, you may edit any of the past transactions directly.  However you must be careful not 
  to put in greater values for past statistics than for future ones.  Spin
  Stats will generate an error if this occurs.
  
  ALL PLAYERS' STATISTICS
  This will print player statistics for all teams in the league.
  
  BACKUP DATA FILES  
  This selection copies your data files to a diskette.  You should back up
  your data on a regular basis.  The little amount of time that this option
  takes to run could save you alot of time should you later discover that 
  you made an error with a player or a team.  
  
  BUILD DRAFT DAY FILE  
  This selection allows you to take a stat file from an on-line service and
  import it into Spin Stats without updating any players in the league.  By
  doing this, you will then be able to quickly build Opening Day rosters
  through the menu choice "Draft Opening Day Rosters".  

  CATEGORY MAINTENANCE (LEAGUE)  
  This selection allows you to modify some of the characteristics of the
  categories being used by the current league.  Among these are entry sort
  and print sort.
  
  CATEGORY MAINTENANCE (SYSTEM)  
  This selection allows you to modify the characteristics of the categories
  in the Spin Stats system.  These characteristics will be inherited by any
  league created from that point on.
  
  CHANGE LEAGUE INFO
  This selection allows you to change the league name, what type of league
  it is, whether or not to attach on-line service names to the players, 
  whether or not to attach major league team names to the players and change
  roster limits.  You can also change which point categories the league will
  track.  
  
  CHANGE SCREEN COLORS  
  This selection allows you to change all of the colors in the Spin Stats 
  system.  Of course, you may only run this selection if you have a color
  monitor.                                                                  
  
  CHECK APPOINTMENTS  
  This selection will look into the appointment calendar and see if there
  are any appointments set up for the current date.
  
  CHECK & MODIFY CONFIG.SYS  
  This selection will check your system's CONFIG.SYS file to make sure that
  it is properly set for Spin Stats to run.                
  
  CLEAR FILES FOR NEW SEASON                                                                                                                                      
  This will clear out the files for a new season.  You will be asked whether
  you  would like to retain the team information and the players. If you 
  retain the players, their statistics will be reset to 0 and their status
  will be set to FULL SEASON PLAYER.  Also, if you choose to retain players,
  you can choose to retain all players or select which players that you 
  would like to retain.
  
  CONVERT VERSION 3.xx to 4.xx  
  This selection will take the files from a Spin Stats version 3 system and
  convert them to the version 4 system.  This will add the version 3 leagues
  to the system and will not overwrite any leagues that you have already 
  added to the version 4 systems.
  
  COPY LEAGUE INFO  
  This selection will take all of the information from one league and copy
  it into a new league.
  
  DELETE A PLAYER FROM THE TEAM
  This selection will delete a player from a team.  This is NOT the same as
  dropping a player from the active roster.  This selection will completely
  wipe  out this player's information.  This information CANNOT be 
  recovered after it has been deleted.
  
  DELETE LEAGUE
  This selection allows you to delete a league from the system.  If you
  delete a league, all associated files (team files and player files) will
  also be deleted.  Once the league has been deleted, the information 
  CANNOT be recovered.
  
  DOWNLOAD FILE MAINTENANCE  
  This selection allows you to change the information about an imported stat
  file.  With this selection, you may change the date and description of the
  imported stat file.
  
  DRAFT OPENING DAY ROSTERS
  This selection allows you to build Opening Day rosters quickly from an 
  imported stat file.  You will simply select the player and position and
  Spin Stats will supply the major league team, on-line code, and add the 
  player to the active roster.  You must first run either "Update Files From
  On-line Service" or "Build Draft Day File" before you can use this menu 
  choice.
  
  DROP A PLAYER FROM THE ROSTER
  This allows you to drop a player from the active roster.  When you drop a
  player, you will select a drop status which will be used for reporting 
  purposes only.  Example statuses are Reserved, Disabled, Sent to minors,
  etc.
  
  EDIT A PLAYER'S NAME
  This selection allows you to change the player's name.  The way the 
  player's name appears here is the way it will appear on the reports.
  
  EDIT TRANSACTION LIST
  This allows the user to modify the transaction file that has been built
  by Spin Stats from the league's roster moves.  This allows the league 
  commissioner to go in and zero out transaction values, etc.
  
  ENTER INTO LEAGUE
  This choice will take you to a particular league in the Spin Stats system
  so  that you may run this league.  Spin Stats will pop-up a list box of 
  leagues for you to select from.  By highlighting and pressing [RETURN] on
  a league name, you are taken to the team menu for that league.  All 
  reports and data entry can only be done on a league by league basis.  Once
  you have entered into a league, any actions you take will only effect that
  particular league.

  FILE RE-BUILD
  This selection rebuilds and verifies all of the system file indexes. The 
  indexes allow the system to sort and find information.  This selection 
  should be chosen routinely in order for Spin Stats to maintain data most
  efficiently.  Never turn the computer off without exiting Spin Stats 
  through its menu selections.  If the power should go off while running 
  Spin Stats, choose this selection the next time that you run the Spin 
  Stats program.                                       
  
  FREE AGENT LISTING                                                                                                                                              
  This report will print out any major league players that are not on an
  active roster.  This choice is only available if you are downloading from
  an on-line service.
  
  GENERATE PERIOD STATS  
  This selection will take a given beginning and ending period and will 
  generate the players' period stats.  This selection must be run prior to
  printing any period stats on the reports.
  
  KEEP FILES FAST AND LEAN  
  When Spin Stats deletes records from its files, it simply marks them for
  deletion without removing them from the files.  Therefore, the files do 
  not get smaller as you delete information.  This selection will go in and
  remove the records marked for deletion.  This selection could help save 
  disk space.  Also, this selection does the same file re-building as the 
  "File Re-build" menu choice.  See File Re-Build.
  
  LEAGUE MAINTENANCE
  This selection will take you into the league maintenance menu selection so
  that you can modify the characteristics of the league.
  
  LEAGUE STANDINGS
  This will print out the league standings.  It will print out a batting 
  total, a pitching total, a grand total, and how many points behind the 
  leader each team is.  With the correct system option set, you may also 
  see what place the teams were the last time that the league standings were
  run.
  
  MAINTAIN FREE AGENT FILTER LIST  
  This selection allows you to select players so that they will no longer 
  appear on the free agent report.  This can be used for players that get 
  injured for the season, etc.  While they still remain in the stat file, 
  they will not appear on the free agent report if you select them with this
  menu choice.
  
  MAINTAIN LEAGUES
  This selection will take you to the maintain leagues menu where you can 
  add leagues, change league information, copy leagues, and delete leagues.
  
  MAINTAIN PRINTERS                                                                                                                                               
  This selection will bring you to a menu where you can add, change, and 
  delete printers along with selecting the active printer.                        
  
  MAJOR LEAGUE TEAM MAINTENANCE                     
  This selection allows you to add, edit, or delete major league teams from
  the system.  When you select a team, you will see four prompts.  One is to
  change the major league team name.  This is how you want the team name to 
  appear on your reports.  The second prompt asks what league the team is 
  in.  This is either 'AL' or 'NL'.  The third prompt asked which division
  this team is in.  This is either 'EAST', 'WEST', or 'CENTRAL'.  The fourth
  field is the team abbreviation.  This is a three letter code that will 
  print on some of the reports so that you can see which team the player is
  on without taking up much report space.
  
  NON-STATISTICAL INFO                                                                                                                                         
  This report will print the players along with their non-statistical 
  information such as on-line service field, major league team name, 
  miscellaneous field, and salary field.
  
  ONE TEAM'S STATISTICS                                                                                                                                           
  This selection allows you to print a single team's player information.
  You will be prompted for the team you would like to print.                               
  
  ON-LINE SERVICE MAINTENANCE  
  This allows you to modify the characteristic of an on-line stat service
  and how Spin Stats picks out information from that on-line stat service.
  
  ON-LINE SERVICE MENU  
  This selection takes you to the on-line service menu.  This is where you
  would run the programs associated with data from an on-line service.    
  
  PLAYER LISTING  
  This selection will print out all of the players from an imported stat 
  file.  This report will also use the players that have been selected 
  through the "Maintain Free Agent Filter List" to decide whether or not 
  the player shows on the report.
  
  PLAYER TRANSACTIONS                                                                                                                                             
  This selection will bring you to another menu where you can manipulate all
  of your player information.  You can do such things as drop and add 
  players to the roster, delete players, edit players, etc. 
  
  POINTS PER CATEGORY                                                                                                                                             
  This will print out each point category and how each team did.  It will 
  show what the team's total was for that category and how many points they
  were awarded for that category.  There are two different types of the 
  points per category report.  One shows a lot of detail for each category
  and the other is more of a summary.
  
  POSITION MAINTENANCE (LEAGUE)  
  This selection allows you to modify some of the characteristics of the 
  positions being used by the current league.  Among these are the 
  description and sort.
  
  POSITION MAINTENANCE (SYSTEM)  
  This selection allows you to modify the characteristics of the positions
  in the Spin Stats system.  These characteristics will be inherited by any
  league created from that point on.  You may add, edit, and delete 
  positions from this menu choice.
  
  PRINT MULTIPLE REPORTS  
  This selection allows you to print the "All Players' Statistics", "Team 
  Statistics", "Points Per Category", and "League Standings" reports all at
  once.  This choice will read the options for each report as they are 
  currently setup.  You may want to go into each of the reports prior to
  running this selection in order to setup their options the way that you
  want them to be.  You can set the options without running the report by
  changing them and then exiting the report without printing it.
  
  PRINT REPORT OF WHO DIDN'T UPDATE                                                                                                                                
  This will print a report containing the active players which were not
  updated by the last imported stat file.
  
  PRINT REPORTS                                                                                                                                                   
  This selection will bring you to another menu where you can choose 
  different reports to print.  You can also maintain your printers through
  this selection.  
  
  PRINT TEAM OWNER INFO  
  This selection will print the owner information for the teams in the 
  current league.
  
  PROGRAM UTILITIES MENU  
  This selection takes you to the program utilities menu  where you can do
  such things as rebuild indexes, backup data files, change screen colors,
  change system options, etc.
  
  QUIT TO DOS
  This selection ends Spin Stats and returns you to DOS.  You should always
  exit  Spin Stats in this manner.  NEVER turn the computer off without 
  exiting Spin Stats properly.  This could result in a loss of data.  If 
  the power should go off while running Spin Stats, choose the FILE 
  RE-BUILD selection the next time that you run Spin Stats.                                                        
  
  QUIT TO LEAGUE MENU
  This selection takes you back to the league menu.                               
  
  QUIT TO TEAM MENU                                                                                                                                               
  This selection will take you back to the team menu.                             
  
  QUIT TO THE PRINT MENU                                                                                                                                          
  This selection takes you back to the print reports menu.                        
  
  RE-ACTIVATE A PLAYER ON ROSTER                                                                                                                                  
  This selection allows you to place a player who is inactive on the active
  roster.  A player's statistics will only count towards the roster totals 
  while he is active.                                 
  
  RE-CALCULATE PLAYERS STATISTICS  
  If for some reason the players' partial statistics get out of synch, 
  running this selection will look through each player's transactions and
  re-generate the player's correct active stats.        
  
  RE-RUN PLAYER UPDATE  
  This selection allows you to re-run the last imported stat file in order
  to update players that were not updated the first time due to incorrect 
  setup.  You should run this choice instead of importing the on-line stat
  file again.
  
  RESTORE DATA FILES  
  This selection will restore the Spin Stats data files from a previous 
  backup.
  
  SEARCH FOR AN ACTIVE PLAYER                                                                                                                                            
  This selection allows you to search for a player within the league.  This
  can be used for quick access to a player or if you do not remember which 
  team he is on.
  
  SELECT THE ACTIVE PRINTER                                                                                                                                       
  This selection allows you to change which printer is set to be used for 
  printing out reports.                      
  
  STATUS MAINTENANCE (LEAGUE)  
  This selection allows you to modify some of the characteristics of the 
  statuses being used by the current league.  Among these are the 
  description, whether this type counts toward active stats, whether this
  stat should appear on the free-agent report, transaction messages and 
  transaction values.
  
  STATUS MAINTENANCE (SYSTEM)  
  This selection allows you to modify the characteristics of the statuses
  in the Spin Stats system.  These characteristics will be inherited by any
  league created from that point on.  You may add, edit, and delete statuses
  from this menu choice.
  
  SWITCH TO ANOTHER TEAM                                                                                                                                          
  If you are finished with the current team and would like to make changes
  to players on another team, you may choose this selection to go to another
  team.   
  
  SYSTEM MAINTENANCE  
  This selection will take you into the system maintenance menu.
  
  SYSTEM OPTIONS  
  This allows you to customize the way Spin Stats handles certain functions.
  For instance, which on-line services you are using, do you want sound 
  effects turned on, which diskette drive do you want to back up to , etc.                                                           
  
  TEAM STATISTICS                                                                                                                                                 
  This will print the team totals for batting and pitching for each team in
  the league.                                                                         
  
  TRADE AN INACTIVE PLAYER                                                                                                                                                 
  This menu choice allows you to trade an inactive player from one team to
  an active roster of another team.
  
  TRADE PLAYERS TO ANOTHER TEAM                                                                                                                                  
  This selection allows you to trade a player or players from one team to 
  another.  The player(s) will become inactive on the previous roster and 
  will become active on the new roster and his (or their) current statistics
  will be automatically transferred.        
  
  TRANSACTION LISTING  
  This allows the user to print a list of transactions that have occurred
  for a given date range.
  
  UPDATE A PLAYER ON THE ROSTER           
  Through this selection you may update a player's information.  This 
  includes his current statistics, position, status, on-line service field,
  major league team, or salary.
  
  UPDATE AN INACTIVE PLAYER  
  This selection allows you to update a player's information while he is not
  on the active roster.  For example, you may change a player's position 
  without re-activating him.
  
  UPDATE BY MAJOR LEAGUE TEAMS
  If you are manually entering the statistics, this selection allows you to
  update your player information in major league team order.  This allows 
  for quicker updating because it will bring up all of the players from the
  same major league team together.  That way you can use the paper and update
  all of the Atlanta Braves together instead of having to look all over the 
  paper to find which team the current player is on.  Through this selection
  you can update the player's statistics, position, status, on-line service
  field and salary.  You CANNOT update the player's major league team name 
  through this selection.
  
  UPDATE BY POSITION
  This selection allows you to update your player information in position 
  order.  This allows for quicker updating because it will bring up all of
  the players for the same position together.  Certain publications list out
  players' stats in this order.  This way you can use the publication and 
  update all of the first basemen together instead of having to look all
  over the paper to find which position the current player is playing.  
  Through this selection you can update the player's statistics, major 
  league team, status, on-line service field and salary.  You CANNOT update
  the player's position through this selection.
  
  UPDATE FILES FROM ON-LINE SERVICE
  This selection allows you to update the current statistics of all of the
  players for each league that has their on-line flag set to 'Y'.  This 
  function will read the on-line service stat file and import them into the
  Spin Stats system.  It will check the system options to see which on-line
  service you have selected so that it will know how the stats are 
  formatted.  After you run this selection, you will probably want to run
  the "Print Report of Who Didn't Update" selection.  This will tell you 
  which players were not updated.  Typically, if a player was not updated,
  then either his major league team or his on-line field is incorrect.
