
MT-Matrix (v1.20) /Deluxe  - Quick installation / Upgrade Notes.......
----------------------------------------------------------------------

1 - Unzip MT-MTX12.ZIP on to a new directory (J:\PCB\MATRIX Recommended)

2 - Edit your PCBoard WELCOME and WELCOMEG Screens, and on collum 1 and
    on the last line of the file place the following call to the matrix;
                         !J:\PCB\MATRIX

3 - Now VERY IMPORTANT  Edit the following files to your preference;

MATRIX.CNF    /   COMMANDS.CNF   /  PROMPTS.CNF   /  DRIVES.CNF  / PPE.CNF

  The 5 Config Files above contain all the configuration options possible
  with, MT-Matrix /Standard, Also in these files ALL important configuration
  notes are included, please read them to learn about MT-Matrix features.

 4 - Now add the following line to collumm one of your PCBoard WELCOME and
     WELCOMEG screens;

     !j:\pcb\matrix\matrix.ppe

 5 - That's it!  The Matrix will now load for your callers <prior to showing
     the PCBoard prompt "Enter your first name?".  !!!! READ !!!!  MATRIX.DOC
     for MORE important INFO.

UPGRADING
---------

There is no simple way to upgrade since this version adds quite a few new
features, therefore none of the CNF files are downward compatible.  A few
recommendations follow however....

1 - Back up (or Zip up) your old matrix directory (configuration)

2 - Unzip the contents of this new version and replace all the older files.

3 - Edit the files  MATRIX.CNF / COMMANDS.CNF / PROMPTS.CNF / DRIVES.CNF
    and PPE.CNF to your liking.  Also look at the notes in each file most
    or all the info you will require is listed within these files.

4 - That's it!  The new matrix is now up....   Now just go into your old
    matrix configuration and replace whatever files you had custumized
    for your matrix previously and replace them with the default ones
    provided here....  Do a file at a time, do not just unzip your old
    configuration over your new created one as that will wipe out your
    brand new matrix....

If you have any problems, refer to the notes on each CNF file, and the
Matrix.Doc also contains important info. If you still have problems
after refering to these files, feel free to give modern technology bbs
a call DATA at: 401-333-1638 HST 16.8 DS or 401-333-3451 HAYS96
and we'll gladly try and guide through whatever problems you might be
experiencing.
