     So you can't copy SUPER UTILITY PLUS so do the next
best thing, make it a CMD file.
 
     Start by booting SUPER UTILITY PLUS.
 
     Remove the disk and replace it with a SYSTEM disk
with at least 29 free grans.
 
     Configure the utility to your system.
 
     Enter the memory utility by typing a 7.
 
     Enter the memory display by typing a 1.
 
     At the prompt enter EB00H for the address, H for 
hex entry mode and a M for modify, then place the cursor
over EB01.
 
     Enter the following hex code.
 
F3 21 00 60 11 00 40 01 00 8B ED B0 31 4C 41 ED 56 C3 15 40
 
F3 21 00 CB 11 00 EB 01 01 8B ED B8 76 C7 00 4B 34 4B 41 4A
 
     Hit ENTER then BREAK.
 
     Jump to memory by entering 8 and at the prompt for
the address enter EB15H.
 
     The system should boot to DOS.
 
     Dump memory from 6000H to EB28H with an entry point
of EB01H.
 
     With NEWDOS/80 it would look like this.
 
     DUMP SUPLUS/CMD 6000H,EB28H,EB01H
 
     TRY IT YOU WILL LIKE IT.
