                 ----------------------------
                   M A X I H O S T    2 . 0
                 ----------------------------
       Maxihost is the most complete RS232 host available for
 the TRS-80 Models I/III. Entire BBS systems have been
 developed around Maxihost. You could even write your own BBS
 with some knowledge of a programming. The complete Maxihost
 system consists of several programs and documentation for
 both the host and remote user that provide features that
 will knock your socks off! It can be used for a good old
 fashion simple host or have it do the following advanced
 features.
 ..... Works under most popular dos's
       (LDOS,NewDos,TrsDos,DosPlus,etc.)
 ..... Self relocating (works with almost all programs)
 ..... Works with HARD DISK!
 ..... Can be made to load fully customized
 ..... Provides protection for BASIC programs
 ..... Selectable Linefeeds and Nulls
 ..... Full 256 character input translation table
 ..... Full 256 character output translation table
 ..... Allows direct cursor positioning on remote 1/3's
 ..... Transmits and Receives graphics
 ..... Can do translations between EBCDIC and ASCII
 ..... Can remove itself (recovers memory also!)
 ..... And More!
 ---------------------------------------------------------
       The main Maxihost program is provided in the ARC file.
 The program runtime parameters are useable with the program
 provided. The following description of the runtime
 parameters will give you a good host program.
       Syntax MAXIHOST (param1,param1,param1,param2)
       Any combination of param1s can be used in a parameter
 list. Only 1 param2 can be used at a time (the second one
 will be ignored).
       Param1 List
       300     Set baud rate to 300 baud, 8,1,N
       1200    Set baud rate to 1200 baud, 8,1,N
       2400    Set baud rate to 2400 baud, 8,1,N
       4800    Set baud rate to 4800 baud, 8,1,N
       A       Automatic 300/1200 baud adjust
       D       Enables direct cursor positioning at remote
       L       Turns on linefeeds (default is off)
       N       Sends 5 nulls after a C/R
       X       Removes previously installed host
       Param2 List
       I       Initialization only
       S       Install as simple host (activates host)
 -----------------------------------------------------------
       This software is provided under the ShareWare concept.
 Please, SHARE this program with others! Also, please keep
 this DOC file with the program when you share it since
 donations are the authors only reward. If you find this
 software useful you are encouraged to send the author a
 donation (your approximation of its worth to you).
       Send donations to:
               Microtechnics
               6780 Laronda Lane
               Las Vegas, Nevada 89115
               Attn: Anthony Kazee
               GEnie Mail Address "A.KAZEE"
       For a donation of $20.00 you will be sent a complete
 Maxihost package includeing the following...
       Complete manual
               explains how to configure the host from basic
               and a whole lot more!
       Sample programs
               demonstrate the direct cursor positioning
               features
       Terminal Driver
               works with most popular terminal programs
               and     adds the direct cursor positioning
               features as well as BEL support
       Customizing Software
               Allows you to configure Maxihosts 20+
               parameters!
 IF YOU NEED A GREAT HOST PROGRAM, YOU NEED MAXIHOST 2.0!
   