SETDRV/CMD
A DCT Utility By Mel Patrick

If you have ever wanted to move around those Drive Control Table Entries
but hesitated to do so, this is the program for you. Its short and simple
and will allow you to install and "defined" drives from a logical slot to
any physical slot.

Once you have things moved around, you can SYSGEN them to stay that way.
I used this program many times to move MEMDISK from drive 6 or 7, down to
0 and lot easier than using the SYSTEM commands. It also allows you to
move the remainder of your drives accordingly.

You can move from the existing table to the new table (they appear on the
screen for you), and then when you are ready press BREAK. 

The program will then give you have the option of installing the new table
in the DCT area, OR you can abort all the changes and just exit to LS/TRS DOS
Ready.

One word or caution, if you move a new drive to position 0, make sure that
before you install the new table, you have a DOS SYSTEM on that drive. If
you don't it won't work.

Mel Patrick, 72757,703

