README for NMS Information
--------------------------

SNMP trap data is included with NetWare for SAA 2.0 so that NetWare for SAA
event messages can be displayed in the NetWare Management System (NMS)
alarm monitor and alarm report.  To access this feature, perform the
following tasks:

- Copy the CE.MIB and SNA.MIB files to the NMS\SNMPMIBS\TRAPMIBS directory
on your NMS workstation.  The CE.MIB file is located in the \NMS directory on
the Communication Executive installation diskette DISK5, and the SNA.MIB
file is located in the \NMS directory on the NetWare for SAA installation
diskette DISK1.

- Refer to NMS system documentation for instructions on integrating the trap
MIBs into the NMS system.  Currently, integration requires accessing the 
SNMP Alarm Integrator from the NMS Tools Menu.

- To enable context-sensitive help from the NMS alarm report, copy the CE.HLP
and SNA.HLP files to the NMS\Help directory on your NMS workstation.  The
CE.HLP file is located in the \NMS directory on the Communication Executive
installation diskette DISK5, and the SNA.HLP file is located in the \NMS
directory on the NetWare for SAA installation diskette DISK1.

- Add the network address of your NMS workstation to the Protocol IPX section
of the TRAPTARG.CFG file on each server from which you wish the NMS alarm
monitor and alarm report to receive NetWare for SAA event messages.  This file
is located in the \ETC directory of the SYS volume.
