Filename:   README.TXT
Product:    NetWare (R) HostPrint(tm) Update for NetWare for SAA* 2.0
Date:       January 20, 1995

=====================================================================
CONTENTS
========

  1.0  Introduction
  2.0  Installation Notes
  3.0  Trademarks

=====================================================================
1.0  INTRODUCTION
=================

  The NetWare HostPrint Update for NetWare for SAA 2.0 is required for using
  NetWare HostPrint 1.1 with NetWare for SAA 2.0.  HostPrint 1.1 will not
  run on NetWare for SAA 2.0 without applying this update.

  IMPORTANT: If you are currently running NetWare for SAA 1.3, you must
             install HostPrint 1.1 PRIOR TO installing NetWare for SAA 2.0.

             DO NOT INSTALL HOSTPRINT 1.1 AFTER YOU INSTALL NETWARE
             FOR SAA 2.0.

             Installing HostPrint 1.1 after installing NetWare for SAA 2.0
             damages the NetWare for SAA configuration utility database. 
             You will then be required to reinstall NetWare for SAA 2.0.  
             
             To perform a new installation of HostPrint after NetWare
             for SAA 2.0 has been installed (that is, a NetWare server
             on which HostPrint is NOT yet installed, but NetWare for 
             SAA 2.0 is), install HostPrint 1.11.  In that case, this 
             update does not apply, as HostPrint 1.11 supports NetWare 
             for SAA 2.0.

=====================================================================
2.0 INSTALLATION NOTES
======================

  *** This update is to be applied only after NetWare HostPrint 1.1 and
      NetWare for SAA 2.0 have been installed. ***

  To install NetWare HostPrint 1.1, do the following:

 NOTE:  You do not need to reinstall HostPrint 1.1 if it was already
        installed on NetWare for SAA v1.3 and you upgraded to NetWare for SAA
        2.0.  If HostPrint 1.1 is NOT already installed, you must install
        HostPrint 1.11, in which case you do not need this update (see the
        "IMPORTANT" note in section 1.0 above).  DO NOT ATTEMPT TO
        INSTALL HOSTPRINT 1.1 AFTER NETWARE FOR SAA 2.0 HAS BEEN INSTALLED.

    1.  Verify that HostPrint, the Communication Executive, and the Communi- 
        cation Services Configuration utility (CSCON) are not running. 

    2.  At the NetWare server console prompt ( : ), type 
        LOAD INSTALL and press <Enter>.

    3.  Select <Product Options> from the Installation Options menu.

    4.  On a NetWare 4.1 server, select <Install a product not listed>.
        On a NetWare 3.12 server, press <Insert>.  
        You are prompted to insert the HostPrint 1.1 Update diskette.

    5.  Insert the Netware HostPrint 1.1 Update Diskette into drive A:
        and press <Enter>.

    6.  Select <Install on this server> from the confirmation menu.


=====================================================================
3.0 Trademarks
==============

 Novell, Inc. has attempted to supply trademark information about company 
 names, products, and services mentioned in this README file.
 
 Novell, NetWare and NetWare HostPrint are trademarks of Novell, In

 SAA is a trademark of International Business Machines Corporation.

=====================================================================
 (c)Copyright 1995 Novell, Inc. All rights reserved.

 ** This concludes the README.TXT file for NetWare HostPrint. **
