
   HOW TO INSTALL REMOTE OFFICE CLIENT WITH DEC's NETRIDER & NETWARE
  ------------------------------------------------------------------

  The Remote Office install procedure creates a file called ROSTART.BAT
  in the Remote Office directory.  This BAT file may be used to load the
  Remote Office client.  If you wish, the modules loading in Rostart.bat
  can be folded into another BAT file.  The load sequence is as follows:

        roffice
        lsl
        odirof-e
        set PCSA=C:\netrider\ppp\pwv5
        sch
        @goto DO_STRAIGHT_LOAD
        emsload c:\netrider\ppp\pwv5\tcpip
        emsload c:\netrider\ppp\pwv5\tn
        emsload c:\netrider\ppp\pwv5\dnr
        emsload c:\netrider\ppp\pwv5\bapi
        @goto PAST_STRAIGHT_LOAD
        :DO_STRAIGHT_LOAD
        c:\netrider\ppp\pwv5\tcpip
        c:\netrider\ppp\pwv5\tn
        c:\netrider\ppp\pwv5\dnr
        c:\netrider\ppp\pwv5\bapi
        :PAST_STRAIGHT_LOAD
        c:\netrider\ppp\pwv5\redir
        vlm
        exeguard
        win

  Note that many PATHWORKS can be loaded into EMS if it has been
  configured. To accomplish this you could insert "REM " before the
  "@goto DO_STRAIGHT_LOAD" text.

  The ROSTART.BAT batch file illustrates how to run the Remote Office
  client with Digital's PATHWORKS TCP/IP product.

  * If you do not plan to run Windows, or you want to connect to the
    remote server from rostart.bat (or any batch file) do the following:
    After loading vlm, insert the line "ro login xxxxx", where xxxxx is
    the name of a phonebook record.  Or if you prefer the interactive
    DOS utility, insert the line "roclient".  Because the vlm is loaded
    prior to establishing a connection, when logging into the Netware
    server, you must specify the name of the server.  For example, to
    login to a server named stampede, enter "login stampede/username".

  For additional information, consult the "readme.txt" file located in
  the "c:\netrider\ppp\pwv5" directory.

  Netware and Pathworks use the ODI interface into Remote Office.  This
  interface may require modification to the net.cfg file located in the
  Remote Office directory.  By default, it will look similar to one of
  the following examples:

  NET.CFG
  -------

  Link Support
         MAX BOARDS      2
         MAX STACKS      11
         MEMPOOL         2k
         BUFFERS         2       1500

  Link Driver ODIROF-E
         int 4
         frame ETHERNET_II
                 PROTOCOL IP         0800 Ethernet_II
                 PROTOCOL ARP        0806 Ethernet_II
                 PROTOCOL RARP       8035 Ethernet_II
         frame ETHERNET_802.2
         VLMIPX ETHERNET_802.2

  Protocol IPX
         bind #2

  Protocol IP
         bind #1


