 /*
 *	FILE:
 *		DataCAD 6.00
 *
 */

@DefineProject
	@Name 		= "DataCAD" 
	@Version	= "6.00"
	@Subdir 	= "\\DCAD6\\"
	@OutDrive 	= C
	@Requires         @HardDisk
	@InDiskBell	= 1
        @Immediate      = 1
@EndProject

@Display
   @Cls

   @If (@CPU < 386)

            @Name requires an 80386 or 80486 CPU.
            Your computer is running on a 80@CPU CPU.

   @Pause

   @Exit

   @EndIf

@EndDisplay      

/*
@If (@Exists ("@StartupDrive:\\intro.gif"))
   @If (@VideoCard == 'V')
      @If (@RAMAvail > 529000)
         @If (@System ("@StartupDrive:\\gifview @StartupDrive:\\intro.gif"))
         @EndIf
      @EndIf
   @EndIf
@EndIf
*/

@Display
   @Cls



                       Cadkey - Installation Utility        
                


                               Cadkey, Inc.                
                        Windsor, Connecticut (USA)        
                         Copyright (c) 1984-1994           
                           All rights reserved            
                 




   @Pause


	@Cls

  This program installs @Name Version @Version on your computer system and 
  verifies the integrity of the distribution files. It asks you several 
  questions about your computer hardware and then gives you the option of 
  installing only selected parts of @Name (such as the DataCAD Program). 

	@Pause
@EndDisplay

@SetGroup(A)

regroup:

@GetGroups
	@Checkbox
	@Cls

	Now you need to select the parts of @Name you want to install.















	Use the [Up Arrow], [Down Arrow], [PgUp], & [PgDn] keys to move the
	bar to the group(s) you wish to install and then press the [Space] key
	to toggle the option from "No" to "Yes".  Press <Enter> when you
	have selected the option(s) you want to install.
	@SET A = "Install All files - 49.0M Bytes"
	@SET D = "Install DataCAD -  9.6M Bytes"
	@SET H = "Install DataCAD Online Documentation - 3.7M Bytes"
	@SET C = "Install DCAL - 3.7M Bytes"
	@SET V = "Install RenderStar 2 - 13.5M Bytes"
	@SET P = "Install DataCAD Printer Utility - 557K Bytes"
	@SET E = "Install Symbol Libraries - 17.7M Bytes"
	@SET U = "Install DataCAD Graphics Driver(s)"

@EndGroups
@GetOption
@If ('A'[=@Group || 'D'[= @Group || 'C'[=@Group || 'V'[=@Group || 
     'H'[=@Group || 'P' [= @Group || 'E'[=@Group || 'U'[=@Group	)
                        You will be installing:
	                   @If ( 'A' [= @Group )
                           DataCAD Program files
                           DataCAD Online Documentation
                           RenderStar 2
                           DCAL files
                           DataCAD Printer Utility
                           DataCAD Symbol Libraries
                           DataCAD Graphics Driver           @EndIf  @If ( 'D' [= @Group )
                           DataCAD Program files             @EndIf  @If ( 'H' [= @Group )
                           DataCAD Online Documentation      @EndIf  @If ( 'V' [= @Group )
                           RenderStar 2                      @EndIf  @If ( 'C' [= @Group )
                           DCAL files                        @EndIf  @If ( 'P' [= @Group )
                           DataCAD Printer Utility           @EndIf  @If ( 'E' [= @Group )
                           DataCAD Symbol Libraries          @EndIf  @If ( 'U' [= @Group )
                           DataCAD Graphics Driver           @EndIf
@SetOption (4000)
@Else
        No files were selected to be installed.  
@EndIf
@Checkbox
@Option 4000 = "Is this correct ? "
@LocalWindow (21, 35)
      Use the space bar to toggle between "Yes" and "No".
@EndOption

@If (!(4000 [= @Option ))

	@FlushGroups
	@Goto regroup

@EndIf

@If(!('A'[=@Group || 'D'[= @Group || 'H'[= @Group || 'P'[=@Group || 'C'[=@Group || 
   'V'[=@Group    || 'E'[= @Group || 'U'[= @Group ))
@Display
    You must use the space bar to select files to be installed.  The files
    you have selected will have a "Yes" next to them.  Then press the 
    <Enter> key to begin installation.

    You may press the <Esc> key to abort installation.

	@Pause

@EndDisplay

	@Goto regroup

@EndIf

@IF ( 'A' [= @Group )
	@SetGroup( D)
	@SetGroup( H)
	@SetGroup( V)
	@SetGroup( C)
	@SetGroup( P)
	@SetGroup( E)
@EndIf

@If (('V' [= @Group) || ('A' [= @Group))
   @GetGroups
	@Checkbox
	@Move(1,1)
        You elected to install RenderStar, now please indicate which 
        part(s) of RenderStar you want to install.
	@Move(4,1)
        If you are familiar with RenderStar 2 eXtension-24 you may
        choose to install the Executable & Support files only.
	@Move(7,1)
        Use the cursor up/down keys to move the lightbar and then
        press the <Enter> key.

	@SetGroup(B)
	@ClearGroup(K)
	@ClearGroup(S)
	@ClearGroup(T)
	@ClearGroup(R)
	@ClearGroup(J)

	@Set B = "Complete RenderStar installation - 16.7M bytes"
	@Set K = "Executable & Support files only - 4.1M bytes"
	@Set S = "Sample & Tutorial files only - 3.1M bytes"
	@Set T = "Texture files only - 3.5M bytes"
	@Set R = "RenderShell Screen Driver"
	@Set J = "Image Display Driver only"

	@Move(16,1)
	@LocalWindow(16,38)
   @EndGroups
@EndIf

redo:

@If ('D' [= @Group)

@GetOutDrive

	@Suppress A    /* don't display A:  */
	@Suppress B    /* or B:             */

	@Cls

 	      Choose the drive on which you want to install @Name.















	Use the <Up Arrow>, <Down Arrow>, <PgUp>, & <PgDn> to move the light-
	bar to the disk drive on which you want to install and then press the
	<Enter> key.
@EndOutDrive

retry:

@GetSubdir
	@Cls

	Enter the name you want for your @Name subdirectory. This
	subdirectory is the location on your disk where	DataCAD will reside.

	@Prompt = " Which subdirectory (<Enter> = @Subdir)? "
@EndSubdir


@EndIf

@DefineVars
	@Dir		@Subdir2	= "@SubDir\\DCAL\\"    
	@Dir		@Subdir3	= "\\RSTAR2\\"
	@Drive		@OutDrive2	= @Outdrive
	@Drive		@OutDrive3	= @Outdrive
@EndVars

@If ('C' [= @Group)

@GetOutDrive @OutDrive2

	@Suppress A    /* don't display A:  */
	@Suppress B    /* or B:             */

	@Cls

 	      Choose the drive on which you want to install DCAL.















   Use the <Up Arrow>, <Down Arrow>, <PgUp>, & <PgDn> to move the light-
   bar to the disk drive on which you want to install and then press the
   <Enter> key.
@EndOutDrive

retry:

@GetSubdir @SubDir2
	@Cls

   Enter the name you want for your DCAL subdirectory. This
   subdirectory is the location on your disk where DCAL 
   will reside.

	@Prompt = " Which subdirectory (<Enter> = @Subdir2)? "
@EndSubdir

	

@EndIf

@If (('P' [= @Group)&&(!('D' [= @Group))&&(!('V' [= @Group)))

     @GetOutDrive
                @Suppress A
                @Suppress B

                @Cls
        
        Choose the drive on which @Name version @version is installed.
















   Use the <Up Arrow>, <Down Arrow>, <PgUp>, & <PgDn> to move the light-
   bar to the disk drive on which you want to install and then press the
   <Enter> key.
        @EndOutDrive

        @GetSubdir
                @Cls
        Enter the path for your @Name version @version subdirectory.

        @Prompt = " Which subdirectory (<Enter> = @Subdir)?"

        @EndSubDir

@EndIf   
@If (('H' [= @Group)&&(!('D' [= @Group))&&(!('V' [= @Group))
    &&(!('P' [= @Group)))

     @GetOutDrive
                @Suppress A
                @Suppress B

                @Cls
        
        Choose the drive on which @Name version @version is installed.
















   Use the <Up Arrow>, <Down Arrow>, <PgUp>, & <PgDn> to move the light-
   bar to the disk drive on which you want to install and then press the
   <Enter> key.
        @EndOutDrive

        @GetSubdir
                @Cls
        Enter the path for your @Name version @version subdirectory.

        @Prompt = " Which subdirectory (<Enter> = @Subdir)?"

        @EndSubDir

@EndIf   
@If (('E' [= @Group)&&(!('D' [= @Group))&&(!('V' [= @Group))
    &&(!('P' [= @Group))&&(!('H' [= @Group)))

     @GetOutDrive
                @Suppress A
                @Suppress B

                @Cls
        
        Choose the drive on which @Name version @version is installed.
















   Use the <Up Arrow>, <Down Arrow>, <PgUp>, & <PgDn> to move the light-
   bar to the disk drive on which you want to install and then press the
   <Enter> key.
        @EndOutDrive
        @GetSubdir
                @Cls
        Enter the path for your @Name version @version subdirectory.

        @Prompt = " Which subdirectory (<Enter> = @Subdir)?"

        @EndSubDir

@EndIf   
@If (('U' [= @Group)&&(!('D' [= @Group))&&(!('V' [= @Group))
    &&(!('P' [= @Group))&&(!('H' [= @Group))&&(!('E' [= @Group)))

     @GetOutDrive
                @Suppress A
                @Suppress B

                @Cls
        
        Choose the drive on which @Name version @version is installed.
















   Use the <Up Arrow>, <Down Arrow>, <PgUp>, & <PgDn> to move the light-
   bar to the disk drive on which you want to install and then press the
   <Enter> key.
        @EndOutDrive
        @GetSubdir
                @Cls
        Enter the path for your @Name version @version subdirectory.

        @Prompt = " Which subdirectory (<Enter> = @Subdir)?"

        @EndSubDir

@EndIf   
@If (('V' [= @Group)&&(!('D' [= @Group))&&(!('U' [= @Group))
    &&(!('P' [= @Group))&&(!('H' [= @Group))&&(!('E' [= @Group)))

     @GetOutDrive
                @Suppress A
                @Suppress B

                @Cls
        
        Choose the drive on which @Name version @version is installed.
















   Use the <Up Arrow>, <Down Arrow>, <PgUp>, & <PgDn> to move the light-
   bar to the disk drive on which you want to install and then press the
   <Enter> key.
        @EndOutDrive
        @GetSubdir
                @Cls
        Enter the path for your @Name version @version subdirectory.

        @Prompt = " Which subdirectory (<Enter> = @Subdir)?"

        @EndSubDir

@EndIf   
@GetOption
@CLS @If ('D' [= @Group) 
                   @If (@Exists "@OutDrive:@SubDir") DatCAD will be installed in 
                    the existing directory @OutDrive:@Subdir 
                   @Else DataCAD will be installed in 
                    @OutDrive:@Subdir
	           @EndIf @EndIf @If ('C' [= @Group)
                   @If (@Exists "@OutDrive2:@SubDir2") DCAL will be installed in 
                    the existing directory @OutDrive2:@Subdir2 
                   @Else DCAL will be installed in 
                    @OutDrive2:@Subdir2
	           @EndIf @EndIf @If ('V' [= @Group)
                   @If (@Exists "@OutDrive:@SubDir@Subdir3") RenderStar 2 will be installed in 
                    the existing directory @OutDrive:@Subdir@Subdir3
                   @Else RenderStar 2 will be installed in 
                    @OutDrive:@Subdir@Subdir3
	           @EndIf @EndIf @If ('P' [= @Group)
                   @If (@Exists "@OutDrive:@SubDir") DataCAD Printer Utility will be installed in 
                    the existing directory @OutDrive:@Subdir 
                   @Else DataCAD Printer Utility will be installed in 
                    @OutDrive:@Subdir
	           @EndIf @EndIf @If ('E' [= @Group)
                   @If (@Exists "@OutDrive:@SubDir") Symbol Libraries will be installed in 
                    the existing directory @OutDrive:@Subdir 
                   @Else Symbol Libraries will be installed in 
                    @OutDrive:@Subdir
	           @EndIf @EndIf @If ('H' [= @Group)
                   @If (@Exists "@OutDrive:@SubDir") DataCAD Online Documentation will be installed in 
                    the existing directory @OutDrive:@Subdir 
                   @Else DataCAD Online Documentation will be installed in 
                    @OutDrive:@Subdir
	           @EndIf @EndIf @If ('U' [= @Group)
                   @If (@Exists "@OutDrive:@SubDir") DataCAD Graphics Driver(s) will be installed in 
                    the existing directory @OutDrive:@Subdir\DRV
                   @Else DataCAD Graphics Driver(s) will be installed in 
                    @OutDrive:@Subdir\DRV
	           @EndIf @EndIf
        
        
        @SetOption(3000) @Checkbox @Option 3000 = "Is this correct ?"
	@LocalWindow(20,38) /*@LocalWindow(19,35)*/
        @MoveCStr(21,15,,"Use the space bar to toggle between Yes and No.") @EndOption

@If (!(3000 [= @Option))

	@Goto redo

@EndIf

@ClearOption (1000)
@ClearOption (1001)
@ClearOption (1002)
@ClearOption (1003)
@ClearOption (1004)
@ClearOption (1005)
@ClearOption (1006)

lastchance:
@If (('A'[=@Group) || ('D'[= @Group) || ('B'[= @Group) || ('K'[= @Group))

   @GetOption
     @Move(0,0)
     @cls     Please select one of the following displays to use as your initial 
     DataCAD and RenderStar configuration.  Selecting "Other" will allow 
     you to select from a list of supported graphics adapters for both 
     DataCAD and RenderStar and run DataCAD's Configuration Utility at 
     the end of this installation to allow fine tuning of your system's 
     configuration. 

           IBM VGA Compatible should work in 90% of all systems.












             Use the <Up Arrow> and <Down Arrow> keys to move the  
             lightbar to the graphics driver you want to select.
      @option  1000 = "IBM VGA Compatible - 640x480 - 16 Colors"
      @option  1001 = "VESA Compatible - 800x600 - 16 Colors"
      @option  1002 = "VESA Compatible - 800x600 - 256 Colors"
      @option  1003 = "VESA Compatible - 1024x768 - 256 Colors"
      @option  1005 = "Tseng Labs ET4000 - 256 Colors"
      @option  1006 = "Tseng Labs ET4000 Sierra Hi-Color - 256 Colors"
      @option  1004 = "Other (Advanced Options)"
      @Move(17,1)
      @LocalWindow(14,39)
   @EndOption
@EndIf

@If ((1001 [= @Option) || (1002 [= @Option) || (1003 [= @Option))
@Display
   @Cls
      
      Many graphics cards require hardware specific drivers, which are
      supplied by the graphics card manufacturer, to be loaded in order
      for the graphics card to function in VESA mode.  Be sure your system
      is set up to be VESA compatible.  DataCAD includes a utility named
      VESACHK that is used to check your graphics card's VESA compatibily.
      To run this utility, be sure this disk is in drive @InDrive and type 
      @InDrive:VESACHK <Enter> at the DOS prompt.




      @Pause
      
@EndDisplay

@EndIf

@ClearOption (5000)
@ClearOption (5001)
@ClearOption (5002)

@If (1004 [= @Option)
   @GetOption
     @Move(0,0)
     You will be prompted to select separate drivers for both DataCAD and
     RenderStar.  You will need to know your graphics card and hardware
     configuration to properly complete the following advanced options.













             Use the <Up Arrow> and <Down Arrow> keys to move the  
             lightbar to the graphics driver you want to select.

      @option  5000 = "Continue installation"
      @option  5001 = "Return to previous menu"
      @option  5002 = "Abort installation"
      @Move(17,1)
      @LocalWindow(12,39)
   @EndOption
@EndIf

@If (5001 [= @Option)
   @goto lastchance
@EndIf

@If (5002 [= @Option)
   @abort
@EndIf

@If (('R'[=@Group) || ('J'[= @Group) || ('U'[= @Group))
   @SetOption (1004)
@EndIf

@SetRCPatchDir( "@OutDrive:@Subdir@Subdir3\\default" )
@SetDFPatchDir( "@OutDrive:@Subdir@Subdir3\\bin" )
@InsertPatchRc("showvga_str", "-nqs                   # vga-shower options                ")

@ClearOption ( 1)
@ClearOption ( 2)
@ClearOption ( 3)
@ClearOption ( 4)
@ClearOption ( 5)
@ClearOption ( 6)
@ClearOption ( 7)
@ClearOption ( 8)
@ClearOption ( 9)
@ClearOption ( 0)
@ClearOption (11)
@ClearOption (12)
@ClearOption (13)
@ClearOption (14)
@ClearOption (15)
@ClearOption (16)
@ClearOption (17)
@ClearOption (18)
@ClearOption (19)
@ClearOption (20)
@ClearOption (21)
@ClearOption (22)
@ClearOption (23)
@ClearOption (24)
@ClearOption (25)
@ClearOption (26)
@ClearOption (27)
@ClearOption (28)
@ClearOption (29)
@ClearOption (30)
@ClearOption (31)
@ClearOption (32)
@ClearOption (33)
@ClearOption (34)
@ClearOption (35)
@ClearOption (36)
@ClearOption (37)
@ClearOption (38)
@ClearOption (39)
@ClearOption (40)
@ClearOption (41)
@ClearOption (42)
@ClearOption (43)
@ClearOption (44)
@ClearOption (45)
@ClearOption (46)
@ClearOption (47)
@ClearOption (48)
@ClearOption (49)
@ClearOption (50)
@ClearOption (51)
@ClearOption (52)
@ClearOption (53)
@ClearOption (54)
@ClearOption (55)
@ClearOption (56)
@ClearOption (57)
@ClearOption (58)
@ClearOption (59)
@ClearOption (60)
@ClearOption (61)
@ClearOption (62)
@ClearOption (63)
@ClearOption (64)
@ClearOption (65)
@ClearOption (66)
@ClearOption (67)
@ClearOption (68)
@ClearOption (69)
@ClearOption (70)
@ClearOption (71)
@ClearOption (101)
@ClearOption (102)
@ClearOption (103)
@ClearOption (104)
@ClearOption (105)
@ClearOption (106)
@ClearOption (107)
@ClearOption (108)
@ClearOption (109)
@ClearOption (110)
@ClearOption (111)
@ClearOption (112)
@ClearOption (113)
@ClearOption (114)
@ClearOption (115)
@ClearOption (116)
@ClearOption (117)
@ClearOption (118)
@ClearOption (119)
@ClearOption (120)
@ClearOption (121)
@ClearOption (122)
@ClearOption (123)
@ClearOption (124)
@ClearOption (125)
@ClearOption (126)
@ClearOption (127)
@ClearOption (128)
@ClearOption (129)
@ClearOption (130)
@ClearOption (131)
@ClearOption (132)
@ClearOption (201)
@ClearOption (202)
@ClearOption (203)
@ClearOption (204)
@ClearOption (205)
@ClearOption (206)
@ClearOption (207)
@ClearOption (208)
@ClearOption (209)
@ClearOption (210)
@ClearOption (211)
@ClearOption (212)
@ClearOption (213)
@ClearOption (214)
@ClearOption (215)
@ClearOption (216)
@ClearOption (217)
@ClearOption (218)
@ClearOption (219)
@ClearOption (220)
@ClearOption (221)
@ClearOption (222)
@ClearOption (223)
@ClearOption (301)
@ClearOption (302)
@ClearOption (303)
@ClearOption (304)

driver:

@If (1000 [= @Option)
   @SetOption (101)
   @SetOption (201)
@ElseIf (1001 [= @Option)
   @SetOption (101)
   @SetOption (202)
@ElseIf (1002 [= @Option)
   @SetOption (101)
   @SetOption (202)
@ElseIf (1003 [= @Option)
   @SetOption (101)
   @SetOption (202)
@ElseIf (1005 [= @Option)
   @SetOption (57)
   @SetOption (101)
   @SetOption (204)
@ElseIf (1006 [= @Option)
   @SetOption (57)
   @SetOption (101)
   @SetOption (205)
@ElseIf (1004 [= @Option)

@SetOption (101)

@If (('A'[=@Group) || ('D'[= @Group) || ('U'[= @Group))
@GetOption
       @Move(0,0)
       @CheckBox


@cls  Please select one or more of the following graphic drivers that you will
  be using with DataCAD.  Use the space bar to toggle between "Yes" and "No".
      
      Press Y to select all drivers.  Press N to deselect all drivers.















             Use the <Up Arrow> and <Down Arrow> keys to move the  
             lightbar to the graphics driver you want to select.
                     <Enter> downloads selected drivers.
      @option  2 = "ATC Graphics 8514/A"		     /* ATC8514.EXE */
      @option  5 = "ATI VGA Wonder 256 color"		     /* ATIV256.EXE */
      @option  9 = "Compaq Portable Plasma Display"	     /* CPAQ.EXE */
      @option 10 = "Compaq Advanced Graphics 1024"	     /* CKDGIS.EXE */
      @option 13 = "DGIS compatibles"			     /* CKDGIS.EXE */
      @option 22 = "HP Intelligent Graphic Controller 10"    /* CKDGIS.EXE */
      @option 23 = "IBM 8514/A"				     /* IBM8514A.EXE */
      @option 24 = "IBM Color Graphics Adapter"		     /* IBMCGA.EXE */
      @option 27 = "IBM Personal Systems/2 - MCGA"	     /* IBMMCGA.EXE */
      @option 28 = "IBM Personal Systems/2 - VGA"	     /* IBMVGA.EXE */
      @option 29 = "IBM Personal Systems/2 - VGA Small Font" /* IBMVGASM.EXE */
      @option 38 = "NEC MVA 1024"			     /* CKDGIS.EXE */
      @option 40 = "Orchid ProDesigner VGA 16 color"	     /* ORCH16.EXE */
      @option 41 = "Orchid ProDesigner VGA 256 color"	     /* ORCH256.EXE */
      @option 44 = "Paradise VGA Professional 256 col"	     /* PAR256.EXE */
      @option 45 = "Paradise 8514/A Plus"		     /* WDI8514.EXE */
      @option 48 = "S3 86C911"				     /* CK_911.EXE */
      @option 50 = "STB VGA EM 16 color"		     /* STB16.EXE */
      @option 51 = "STB VGA EM 256 color"		     /* STB256.EXE */
      @option 55 = "TIGA compatibles"			     /* CKTIGA.EXE */
      @option 57 = "Tseng Labs ET4000 256 color"	     /* ET4000.EXE */
      @option 63 = "VESA compatible 16 color"		     /* VESA16.EXE */
      @option 64 = "VESA compatible 256 color"		     /* VESA256.EXE */
      @option 67 = "Video 7 VRAM VGA 16 color"		     /* V7VR16.EXE */
      @option 68 = "Video 7 VRAM VGA 256 color"		     /* V7VR256.EXE */
      @Move(17,1)
      @LocalWindow(12,39)
   @EndOption

   @If (!(( 1 [=@Option)|| ( 2 [=@Option)|| ( 3 [=@Option)|| ( 4 [=@Option)||
	  ( 5 [=@Option)|| ( 6 [=@Option)|| ( 7 [=@Option)|| ( 8 [=@Option)||
	  ( 9 [=@Option)|| (10 [=@Option)|| (11 [=@Option)|| (12 [=@Option)||
	  (13 [=@Option)|| (14 [=@Option)|| (15 [=@Option)|| (16 [=@Option)||
	  (17 [=@Option)|| (18 [=@Option)|| (19 [=@Option)|| (20 [=@Option)||
	  (21 [=@Option)|| (22 [=@Option)|| (23 [=@Option)|| (24 [=@Option)||
	  (25 [=@Option)|| (26 [=@Option)|| (27 [=@Option)|| (28 [=@Option)||
	  (29 [=@Option)|| (30 [=@Option)|| (31 [=@Option)|| (32 [=@Option)||
	  (33 [=@Option)|| (34 [=@Option)|| (35 [=@Option)|| (36 [=@Option)||
	  (37 [=@Option)|| (38 [=@Option)|| (39 [=@Option)|| (40 [=@Option)||
	  (41 [=@Option)|| (42 [=@Option)|| (43 [=@Option)|| (44 [=@Option)||
	  (45 [=@Option)|| (46 [=@Option)|| (47 [=@Option)|| (48 [=@Option)||
	  (49 [=@Option)|| (50 [=@Option)|| (51 [=@Option)|| (52 [=@Option)||
	  (53 [=@Option)|| (54 [=@Option)|| (55 [=@Option)|| (56 [=@Option)||
	  (57 [=@Option)|| (58 [=@Option)|| (59 [=@Option)|| (60 [=@Option)||
	  (61 [=@Option)|| (62 [=@Option)|| (63 [=@Option)|| (64 [=@Option)||
	  (65 [=@Option)|| (66 [=@Option)|| (67 [=@Option)|| (68 [=@Option)||
	  (69 [=@Option)|| (70 [=@Option)|| (71 [=@Option)))

       @GetOption
          @ClearOption (2000)
          @ClearOption (3000)
          @Move(5,5)
          @MoveCStr(5,5,79,"                                                                     ")
          @MoveCStr(6,5,79,"  You must use the space bar to select driver(s) to be installed.    ")
          @MoveCStr(7,5,79,"  The driver(s) you have selected will have a \"Yes\" next to them.    ")
          @MoveCStr(8,5,79,"  Then press the <Enter> key to begin installation.                  ")
          @MoveCStr(9,5,79,"                                                                     ")
          @MoveCStr(10,5,79,"  You may press the <Esc> key to abort installation.                 ")
          @MoveCStr(11,5,79,"                                                                     ")
           @LocalWindow (15,35)
           @option 2000 = "Select a Driver"
           @Option 3000 = "Install no Drivers"
       @EndOption

       @If (2000 [= @Option)

           @Goto driver
       
       @EndIf

   @EndIf
@EndIf

@If ('R' [= @Group)
	@GetOption
	@Move(0,0)
   Please specify the VGA graphics board that you will be using for
   displaying the RenderStar 2 eXtension-24's user-interface, "RenderShell".
 
   If you are not sure which board you are using please read the README.RS2
   file on disk 1, in this file we keep track of the boards we support.
 
          Use the cursor up/dow keys to scroll through the list.
 
	@Option 101 = "All Standard VGA Compatibles            640x480 16"
	@Option 102 = "ATI, VGA Wonder                         800x600 16"
	@Option 103 = "CHIPS 82C45x                            800x600 16"
	@Option 104 = "Everex, EVGA EV-673                     800x600 16"
	@Option 105 = "Genoa, SuperEGA 4880                    800x600 16"
	@Option 106 = "Genoa, SuperVGA 5/6000                  800x600 16"
	@Option 107 = "Genoa, SuperVGA 5/6000 Option 1        1024x768 16"
	@Option 108 = "Genoa, SuperVGA 6000 Option 2          1024x768 16"
	@Option 109 = "NSI, Smart EGA/Plus                     800x600 16"
	@Option 110 = "OAK VGA                                 800x600 16"
	@Option 111 = "OAK VGA-segspn                         1024x768 16"
	@Option 112 = "OAK VGA-banked                         1024x768 16"
	@Option 113 = "Paradise, VGA                           800x600 16"
	@Option 114 = "Paradise, VGA Pro Option 1            1024x768 16"
	@Option 115 = "Paradise, VGA Pro Option 2             1024x768 16"
	@Option 116 = "Quadram, VGA Spectra                    800x600 16"
	@Option 117 = "Quadram, VGA Spectra Option 1          1024x768 16"
	@Option 118 = "Quadram, VGA Spectra Option 2          1024x768 16"
	@Option 119 = "Tecmar, VGA/AD                          800x600 16"
	@Option 120 = "Tecmar, VGA/AD Option 1                1024x768 16"
	@Option 121 = "Tecmar, VGA/AD Option 2                1024x768 16"
	@Option 122 = "Trident Impact                          800x600 16"
	@Option 123 = "Trident Impact Option 1                1024x768 16"
	@Option 124 = "Trident Impact Option 2                1024x768 16"
	@Option 125 = "Tseng 3000                              800x600 16"
	@Option 126 = "Tseng 3000                             1024x768 16"
	@Option 127 = "Tseng 4000                              800x600 16"
	@Option 128 = "Tseng 4000                             1024x768 16"
	@Option 129 = "VESA Super VGA                          800x600 16"
	@Option 130 = "V7, Vega, FastWrite, 1024i, VRAM VGA    800x600 16"
	@Option 131 = "V7, VGA 1024i                          1024x768 16"
	@Option 132 = "V7, FastWrite, 1024i, VRAM VGA         1024x768 16"
	@Move(17,1)
	@LocalWindow(17,40)
	@EndOption
@EndIf

@If (('B' [= @Group) || ('K' [= @Group) || ('J' [= @Group))
@If (('A'[=@Group) || ('D'[= @Group) || ('U'[= @Group))
	@GetOption 
        @Move(0,0)
  @cls  In the last screen, you were asked to select the driver(s) to run DataCAD. 
  This screen allows you to select the graphics driver that you will use  
  for displaying your RenderStar images.  If you are not sure which board 
  you are using please read the README.RS2 file on disk 1.  In this file we 
  list the boards and how we support them.
	@Option 201 = "SuperVGA                              8 bit"
	@Option 202 = "VESA                        Sierra Hi-Color"
	@Option 203 = "Tseng 3000                            8 bit"
	@Option 204 = "Tseng 4000                            8 bit"
	@Option 205 = "Tseng 4000                  Sierra Hi-Color"
	@Option 206 = "TIGA                                  8 bit"
	@Option 207 = "TIGA                            8/16/24 bit"
	@Option 208 = "IBM 8514/A or Compatible              8 bit"
	@Option 209 = "DGIS                                  8 bit"
	@Option 210 = "SPEA 1280/FGA,Painter,Gallery,HiLite  8 bit"
	@Option 211 = "Cambridge Xcellerator 1600/1600i      8 bit"
	@Option 212 = "Rasterex Graphics Toolkit Interface   8 bit"
	@Option 213 = "Matrox PG-1281/8                      8 bit"
	@Option 214 = "NEC Graphics Engine                   8 bit"
	@Option 215 = "ELSA XHR                              8 bit"
	@Option 216 = "Truevision TargaVista                24 bit"
	@Option 217 = "Artist RealVision 16E                 8 bit"
	@Option 218 = "Artist XJ10,MC10,XJ12,MC12            8 bit"
	@Option 219 = "Artist XJS                            8 bit"
	@Option 220 = "DataPATH Q-PC                         8 bit"
	@Option 221 = "Metheus UGA                           8 bit"
	@Option 222 = "CalComp DrawingCard 3100/3200         8 bit"
	@Option 223 = "Pixelworks                            8 bit"
	@Move(18,1)
	@LocalWindow(13,37)
       Use the <Up Arrow> and <Down Arrow> keys to move the lightbar 
       to the graphics driver you want to select and press <Enter>.
	@EndOption
@Else
	@GetOption 
        @Move(0,0)
  @cls
  This screen allows you to select the graphics driver that you will use  
  for displaying your RenderStar images.  If you are not sure which board 
  you are using please read the README.RS2 file on disk 1.  In this file we 
  list the boards and how we support them.
	@Option 201 = "SuperVGA                              8 bit"
	@Option 202 = "VESA                        Sierra Hi-Color"
	@Option 203 = "Tseng 3000                            8 bit"
	@Option 204 = "Tseng 4000                            8 bit"
	@Option 205 = "Tseng 4000                  Sierra Hi-Color"
	@Option 206 = "TIGA                                  8 bit"
	@Option 207 = "TIGA                            8/16/24 bit"
	@Option 208 = "IBM 8514/A or Compatible              8 bit"
	@Option 209 = "DGIS                                  8 bit"
	@Option 210 = "SPEA 1280/FGA,Painter,Gallery,HiLite  8 bit"
	@Option 211 = "Cambridge Xcellerator 1600/1600i      8 bit"
	@Option 212 = "Rasterex Graphics Toolkit Interface   8 bit"
	@Option 213 = "Matrox PG-1281/8                      8 bit"
	@Option 214 = "NEC Graphics Engine                   8 bit"
	@Option 215 = "ELSA XHR                              8 bit"
	@Option 216 = "Truevision TargaVista                24 bit"
	@Option 217 = "Artist RealVision 16E                 8 bit"
	@Option 218 = "Artist XJ10,MC10,XJ12,MC12            8 bit"
	@Option 219 = "Artist XJS                            8 bit"
	@Option 220 = "DataPATH Q-PC                         8 bit"
	@Option 221 = "Metheus UGA                           8 bit"
	@Option 222 = "CalComp DrawingCard 3100/3200         8 bit"
	@Option 223 = "Pixelworks                            8 bit"
	@Move(18,1)
	@LocalWindow(13,37)
       Use the <Up Arrow> and <Down Arrow> keys to move the lightbar 
       to the graphics driver you want to select and press <Enter>.
	@EndOption
@EndIf
@EndIf
@EndIf

@If (('B' [= @Group) || ('K' [= @Group))
   @SetOption (301)
@EndIf

@ClearGroup(F)
@ClearGroup(G)

@If (206 [= @Option || 207 [= @Option || 208 [= @Option || 209 [= @Option || 
     210 [= @Option || 212 [= @Option || 214 [= @Option || 215 [= @Option || 
     217 [= @Option || 218 [= @Option || 221 [= @Option || 222 [= @Option)
	@GetGroups
	@Move(1,1)
 You have selected a Hi-Res Graphics Card that has either Single Screen or
 Dual Screen options. Please select the configuration that you will be using.
	@Move(7,1)
	@LocalWindow(7,35)
	@Set G = "Single Screen Configuration"
	@Set F = "Dual Screen Configuration"
	@EndGroups
@EndIf

@If ('G' [= @Group)
	@If (206 [= @Option || 207 [= @Option)
	@InsertPatchRc("show_str", "-cnqs -A               # Counting, Quanting, Silence,Single")
	@InsertPatchRc("show_type","main                   # Main, Single Screen")

	@ElseIf (208 [= @Option || 209 [= @Option || 210 [= @Option || 
		 212 [= @Option || 214 [= @Option || 215 [= @Option || 
		 217 [= @Option || 218 [= @Option || 221 [= @Option || 222 [= @Option)
	@InsertPatchRc("show_type","main                   # Main, Single Screen")
	@Endif

@ElseIf ('F' [=@Group)
	@InsertPatchRc("show_type","second                 # Second,Dual Screen")
@EndIf

@If (301 [= @Option)
	@InsertPatchRc("mouse_str","-m:d# MS DOS Mouse driver")
@ElseIf (302 [= @Option)
	@InsertPatchRc("mouse_str","-1# Logitech/Mouse Systems mouse, COM1")
@ElseIf (303 [= @Option)
	@InsertPatchRc("mouse_str","-2# Logitech/Mouse Systems mouse, COM2")
@ElseIf (304 [= @Option)
	@InsertPatchRc("mouse_str","-m:f# Fujitsu DOS mouse driver")
@EndIf

@If (201 [= @Option || 203 [= @Option || 204 [= @Option || 205 [= @Option )
	@InsertPatchRc("show_file","rs2svga.exe            # ET3000/ET4000/VESA 8/16 bit")
	@InsertPatchRc("show_str", "-cnqs                  # Counting, Quanting, Silence")
	@InsertPatchRc("show_type","main                   # Main, Single Screen")
@ElseIf (202 [= @Option)
	@InsertPatchRc("show_file","rs2vesa.exe            # VESA 8/16 bit")
	@InsertPatchRc("show_str", "-cnqs                  # Counting, Quanting, Silence")
	@InsertPatchRc("show_type","full                   # Main, Single Screen")
@ElseIf (206 [= @Option)
	@InsertPatchRc("show_file","rs2tiga.exe            # TIGA 34010/34020 8 bit")
	@InsertPatchRc("show_str", "-cnqs                  # Counting, Quanting, Silence")
@ElseIf (207 [= @Option)
	@InsertPatchRc("show_file","rs2tiga.exe            # TIGA 34010/34020 24 bit")
	@InsertPatchRc("show_str", "-cnrs                  # Counting, Real Colors, Silence")
@ElseIf (208 [= @Option)
	@InsertPatchRc("show_file","rs2_85.exe             # IBM 8514/A & Compatible")
	@InsertPatchRc("show_str", "-cnqs                  # Counting, Quanting, Silence")
@ElseIf (209 [= @Option)
	@InsertPatchRc("show_file","rs2dgis.exe            # DGIS graphics interface")
	@InsertPatchRc("show_str", "-cnqs                  # Counting, Quanting, Silence")
@ElseIf (210 [= @Option)
	@InsertPatchRc("show_file","rs2spea.exe            # SPEA FGA,Painter, Gallery")
	@InsertPatchRc("show_str", "-cnqs                  # Counting, Quanting, Silence")
@ElseIf (211 [= @Option)
	@InsertPatchRc("show_file","rs2cam.exe             # Cambridge Xcellerator 1600/1600i")
	@InsertPatchrc("show_str", "-cns                   # Counting")
	@InsertPatchrc("show_type","second                 # Second,Dual Screen")
@ElseIf (212 [= @Option)
	@InsertPatchrc("show_file","rs2gti.exe             # Rasterex Toolkit")
	@InsertPatchrc("show_str", "-cns                   # Counting")
@ElseIf (213 [= @Option)
	@InsertPatchrc("show_file","rs2mtrx.exe            # Matrox PG-1281/8")
	@InsertPatchrc("show_str", "-cns                   # Counting")
	@InsertPatchrc("show_type","second                 # Second,Dual Screen")
@ElseIf (214 [= @Option)
	@InsertPatchrc("show_file","rs2nec.exe             # NEC Graphics Engine")
	@InsertPatchrc("show_str", "-cns                   # Counting")
@ElseIf (215 [= @Option)
	@InsertPatchrc("show_file","rs2xhr.exe             # ELSA XHR")
	@InsertPatchrc("show_str", "-cns                   # Counting")
@ElseIf (216 [= @Option)
	@InsertPatchrc("show_file","rs2vista.exe           # TargaVISTA")
	@InsertPatchrc("show_str", "-cns -M 4              # Counting, Standard Mode 768x576")
	@InsertPatchrc("show_type","second                 # Second,Dual Screen")
@ElseIf (217 [= @Option)
	@InsertPatchrc("show_file","rs2v16e.exe            # Artist Realvision")
	@InsertPatchrc("show_str", "-cn                    # Counting")
@ElseIf (218 [= @Option)
	@InsertPatchrc("show_file","rs2art_h.exe           # Artist HITACHI")
	@InsertPatchrc("show_str", "-cns                   # Counting")
@ElseIf (219 [= @Option)
	@InsertPatchrc("show_file","rs2art_t.exe           # Artist TIGA")
	@InsertPatchrc("show_str", "-cns                   # Counting")
@ElseIf (220 [= @Option)
	@InsertPatchrc("show_file","gif2qpc.bat            # Datapath Q-PC")
	@InsertPatchrc("show_str", "-cn                    # Counting")
	@InsertPatchrc("show_type","second                 # Second,Dual Screen")
@ElseIf (221 [= @Option)
	@InsertPatchrc("show_file","gif2uga.bat            # Metheus UGA")
	@InsertPatchRc("show_str", "-cn                    # Counting")
	@InsertPatchRc("show_type","second                 # Second,Dual Screen")
@ElseIf (222 [= @Option)
	@InsertPatchRc("show_file","gif2_dc.bat            # Calcomp DrawinCard")
	@InsertPatchRc("show_str", "-cn                    # Counting")
@ElseIf (223 [= @Option)
	@InsertPatchRc("show_file","gif2_pw.bat            # Pixelworks")
	@InsertPatchRc("show_str", "-cn                    # Counting")
@EndIf

@If (101 [= @Option)
	@InsertPatchRc("display_str","-i:23# IBM, VGA  640x480 16")
	@SetCfgFont("640.fnt")
@ElseIf (102 [= @Option)
	@InsertPatchRc("display_str","-ai:20# ATI, VGA Wonder  800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (103 [= @Option)
	@InsertPatchRc("display_str","-ch:20# CHIPS 82C45x  800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (104 [= @Option)
	@InsertPatchRc("display_str","-ev:20# Everex, EVGA EV-673  800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (105 [= @Option)
	@InsertPatchRc("display_str","-g:11# Genoa, SuperEGA 4880  800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (106 [= @Option)
	@InsertPatchrc( "display_str","-g:20# Genoa, SuperVGA 5/6000  800x600 16 ")
	@SetCfgFont("800.fnt")
@ElseIf (107 [= @Option)
	@InsertPatchrc( "display_str","-g:21# Genoa, SuperVGA 5/6000-segspn  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (108 [= @Option)
	@InsertPatchrc( "display_str","-g:23# Genoa, SuperVGA 6000-banked  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (109 [= @Option)
	@InsertPatchrc( "display_str","-ns:10# NSI, Smart EGA/Plus  800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (110 [= @Option)
	@InsertPatchrc( "display_str","-ok:20# OAK VGA  800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (111 [= @Option)
	@InsertPatchrc( "display_str","-ok:21# OAK VGA-segspn  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (112 [= @Option)
	@InsertPatchrc( "display_str","-ok:22# OAK VGA-banked  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (113 [= @Option)
	@InsertPatchrc( "display_str","-p:20# Paradise VGA  800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (114 [= @Option)
	@InsertPatchrc( "display_str","-p:21# Paradise VGA Pro-segspn  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (115 [= @Option)
	@InsertPatchrc( "display_str","-p:22# Paradise VGA Pro-banked  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (116 [= @Option)
	@InsertPatchrc( "display_str","-q:20# Quadram VGA Spectra  800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (117 [= @Option)
	@InsertPatchrc( "display_str","-st:21# Quadram VGA Spectra-segspn  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (118 [= @Option)
	@InsertPatchrc( "display_str","-st:22# Quadram, VGA Spectra-banked  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (119 [= @Option)
	@InsertPatchrc( "display_str","-tc:20# Tecmar, VGA/AD  800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (120 [= @Option)
	@InsertPatchrc( "display_str","-tc:21# Tecmar, VGA/AD-segspn  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (121 [= @Option)
	@InsertPatchrc( "display_str","-tc:22# Tecmar, VGA/AD-banked  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (122 [= @Option)
	@InsertPatchrc( "display_str","-tr:20# Trident Impact  800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (123 [= @Option)
	@InsertPatchrc( "display_str","-tr:21# Trident Impact-banked  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (124 [= @Option)
	@InsertPatchrc( "display_str","-tr:22# Trident Impact  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (125 [= @Option)
	@InsertPatchrc( "display_str","-st:20# Tseng 3000  800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (126 [= @Option)
	@InsertPatchrc( "display_str","-st:22# Tseng 3000-banked  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (127 [= @Option)
	@InsertPatchrc( "display_str","-ts:20# Tseng 4000  800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (128 [= @Option)
	@InsertPatchrc( "display_str","-ts:21# Tseng 4000-banked  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (129 [= @Option)
	@InsertPatchrc( "display_str","-ve:20# VESA Super VGA 800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (130 [= @Option)
	@InsertPatchrc( "display_str","-v7:20# V7, Vega, FastWrite, 1024i, VRAM VGA  800x600 16")
	@SetCfgFont("800.fnt")
@ElseIf (131 [= @Option)
	@InsertPatchrc( "display_str","-v7:21# V7, VGA 1024i-segspn  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@ElseIf (132 [= @Option)
	@InsertPatchrc( "display_str","-v7:22# V7, FastWrite, 1024i, VRAM VGA-banked  1024x768 16")
	@SetCfgFont("1024-3.fnt")
@EndIf

@InsertPatchRc( "render_file","render2.exe            # DOS 386/486 Render Engine" )


@If (@Exists ("@StartupDrive:\\regcard.gif"))
   @If (@VideoCard == 'V')
      @If (@RAMAvail > 529000)
         @If (@System ("@StartupDrive:\\gifview @StartupDrive:\\regcard.gif"))
         @EndIf
      @EndIf
   @EndIf
@EndIf

@If (1004 [= @Option)
   @If (!(( 'A' [= @Group ) || ('D' [= @Group ) || ( 'U' [= @Group )))
      @ClearOption (1004)
   @EndIf
@EndIf

@If ( 'D' [= @Group )

   @DefineDisk

   @Label = "DISK 1 OF 12"

       @BeginLib DCADMAIN.RED  
                
           @File   *.*     @Out    	@OutDrive:\@Subdir\*.*
        
       @EndLib

       @BeginLib CFG.RED  
          @If (1000 [= @Option)
             @File   VGASMALL.CFG     @Out    	@OutDrive:\@Subdir\DCAD.CFG
          @ElseIf (1001 [= @Option)
             @File   V16_8x6.CFG      @Out    	@OutDrive:\@Subdir\DCAD.CFG
             @File   RUNV16.BAT       @Out    	@OutDrive:\@Subdir\RUNDCAD.BAT
          @ElseIf (1002 [= @Option)
             @File   V256_8x6.CFG     @Out    	@OutDrive:\@Subdir\DCAD.CFG
             @File   RUNV256.BAT      @Out    	@OutDrive:\@Subdir\RUNDCAD.BAT
          @ElseIf (1003 [= @Option)
             @File   V256_1x7.CFG     @Out    	@OutDrive:\@Subdir\DCAD.CFG
             @File   RUNV256.BAT      @Out    	@OutDrive:\@Subdir\RUNDCAD.BAT
          @ElseIf ((1005 [= @Option) || (1006 [= @Option))
             @File   ET4000.CFG       @Out    	@OutDrive:\@Subdir\DCAD.CFG
             @File   RUN4000.BAT      @Out    	@OutDrive:\@Subdir\RUNDCAD.BAT
          @Endif
       @EndLib

       @BeginLib DCADFRM.RED
		
	   @File   *.*	   @Out		@OutDrive:\@Subdir\FRM\*.*

       @EndLib

   @EndDisk
@EndIf

@If (( 'E' [= @Group ) ||
     ( 'D' [= @Group ))

   @Chain ("DISK 2 OF 12")

@ElseIf (( 'E' [= @Group ) ||
         ( 'D' [= @Group ))

   @Chain ("DISK 3 OF 12")

@ElseIf (( 'D' [= @Group ) ||
         ( 'C' [= @Group ) ||
         ( 'P' [= @Group ) ||
         ( 'U' [= @Group ))

   @Chain ("DISK 4 OF 12")

@ElseIf (( 'D' [= @Group ) ||
         ( 'H' [= @Group ))

   @Chain ("DISK 5 OF 12")

@ElseIf ( 'E' [= @Group )

   @Chain ("DISK 6 OF 12")

@ElseIf ( 'E' [= @Group )

   @Chain ("DISK 7 OF 12")

@ElseIf ( 'V' [= @Group )

   @Chain ("DISK 8 OF 12")

@EndIf

@Finish

   @Cls

	@ChDrive@OutDrive
        @ChDir "@Subdir"

        @If (('A'[=@Group) || ('D'[= @Group ))
           @Mkdir ("@OutDrive:\\@Subdir\\LYR")
           @Mkdir ("@OutDrive:\\@Subdir\\PLT")
           @Mkdir ("@OutDrive:\\@Subdir\\SYM")
           @Mkdir ("@OutDrive:\\@Subdir\\TPL")
        @EndIf


   @If (1004 [= @Option)
        The DataCAD Configuration Utility will now be run.  This is
        where you should select your display device, digitizer (if any),
        plotter, etc.

	@pause

      @If (@Spawn ("CONFIG"))
      @EndIf

   @EndIf
   @Cls

        The installation has been successfully completed.
        To run DataCAD, type RUNDCAD at the DOS prompt and
        press <Enter>.

	Note:  Please be sure you have installed your mouse
	       manufacturer's supplied driver according to
	       their instructions prior to running DataCAD.

	Thank-you for choosing DataCAD!

	@pause
@EndFinish
