Congratulations on your purchase of "Reading Blaster: Invasion of
the Word Snatchers"! To supply you with up-to-the-minute information, we 
have included the following information.  



VIDEO

Some Windows video drivers may cause erratic behavior under certain 
conditions. If you experience any unusual screen activity, switch
to the standard VGA mode from the Program Manager or other available
drivers supplied with your video card. 


To change your video mode:

o	From the Program Manager, double-click the Windows Setup icon 
	in the Main group.
o	From the Options menu on the Windows Setup box, select Change
	System Settings. 
o	Click the arrow to the far right of the word "Display".
	You will see a list of video drivers.
o	Scroll through the list until you see the word "VGA".
o	Double-click "VGA" and follow any screen prompts.
	Windows may ask you to insert a disk(s) that came with 
	your original Windows package.

For more information about video drivers, please consult your Windows
documentation.



IF YOU RECEIVE AN INSUFFICIENT MEMORY MESSAGE OR IF READING BLASTER DOES 
NOT PRINT CORRECTLY

Increase the size of Window's virtual memory. Also, make sure that the 
virtual memory is set to permanent. For more detailed information about 
virtual memory, consult your Windows documentation.



IF THE PROGRAM IS VERY SLOW

Close any unnecessary applications, that may be running.  If you have a 
386 or faster processor, be sure you are running Windows in enhanced mode.
Also be sure that the Virtual memory settings are active. To check the 
Virtual memory settings:

o	Click on the Control Panel Icon from the Main Menu
o	Click on the 386 Enhanced Icon
o	Choose Virtual memory and verify the settings
	We require Virtual memory with a 8000 KB permanent swap file.
o	To make changes to the settings, consult your Windows
	documentation.
	
	
	
PC TOOLS VSAFE and MS-DOS VSAFE

PC Tools VSAFE or MS-DOS 6.0 VSAFE may interfere with the install process. 
To disable VSAFE before installing "Reading Blaster: Invasion of the Word
Snatchers", exit Windows and type VSAFE /U, then press Enter. 

Restart your computer after installation of Reading Blaster: Invasion of
the Word Snatchers to turn PC Tools VSAFE or MS-DOS VSAFE back on.



TANDY SENSATION USERS

Tandy's WinMate system does not automatically create the "Reading Blaster:
Invasion of the Word Snatchers" icons or launch our program. We suggest
disabling WinMate and running directly from Windows. If you have further
questions about Tandy's WinMate, please call Tandy Technical Support at
(817) 878-6875.


WinMate is a registered trademark of the Tandy Corporation.

