     
    Install program for General MIDI Sound Card Drivers: 

          Roland GS Sound 
          Gravis Ultrasound
          Aria Synthesizer

    This program will copy the necessary files for supported General MIDI 
    Sound Cards and run Setup.
     
    Please, copy the  INSTGMID.BAT  file to the directory on your hard 
    drive where you have installed 3-D Dinosaur Adventure.  Then from that
    directory on your hard drive, execute INSTGMID.BAT with the name of 
    your floppy drive to install from.  For example:
     
         C:>cd \dino3d
         C:\DINO3D>copy a:instgmid.bat
         C:\DINO3D>instgmid.bat a:

    Setup should properly configure 3-D Dinosaur Adventure for your sound 
    card unless you have a Roland GS. Since the Roland GS Sound Card does 
    not play digitized sound you will have to manually copy the appropriate 
    driver from DINO3D\DRIVERS\*.DRV into DINO3D\SOUND.DRV for your sound
    card. For instance, for Sound Blaster and Compatables use the following 
    command:

         C:\DINO3D>copy drivers\sbdig.drv sound.drv

    Use the following list to copy the right file for your Sound Card:
        ADLIBDIG.DRV        -       ADLIB
        ALGDIG.DRV          -       ADLIB GOLD
        CVXSND.DRV          -       COVOX SPEECH THING
        DISNEY.DRV          -       DISNEY SOUND SOURCE
        LANTSND.DRV         -       LANTASTIC VOICE
        MSFTDIG.DRV         -       MICROSOFT SOUND SYSTEM
        PASDIG.DRV          -       PRO AUDIO
        SBDIG.DRV           -       SOUND BLASTER & COMPATIBLES
        SBPDIG.DRV          -       SOUND BLASTER PRO or 16
        VMSND.DRV           -       COVOX SOUND MASTER II
        

    Also, you will have to edit the SoundDevParams line in the configuration
    file KA.CNF in the DINO3D directory. Please, type in the I/O Address, 
    IRQ Vector, and DMA Channel that reflect your sound card settings, e.g.: 
    
        SoundDevParams : A220 I7 D1
        
    Additionally, if your Roland GS is at a non-default address, you may need    
    to add the correct address to the MusicDevParams line in this same file. 

    During setup the Gravis Ultrasound card will not play sounds during the 
    setup tests but will copy over the correct driver files.

