******************************************************************************
		   Reflection X Product Information
		   (C)opyright 1993-95 Walker Richer & Quinn, Inc.
******************************************************************************

The original distribution disks contain files for Reflection X version 5.00.
These files are in compressed format.

Reflection X Main Application Files
===================================
READMERX.TXT		This file.
RX.EXE			Main Reflection X program.
RXSTART.EXE		Reflection X Client Startup.
RX*.DLL 		Reflection X Dynamic Link Library files.

Setup Files
===========
RX.INF			SETUP.EXE
SETUP.LST		SETUP.MST
COPYLIST.MST		SETUP.INC
UTIL.MST		MSCUISTF.DLL
MSUILSTF.DLL		MSINSSTF.DLL
CUSTOM.MST		MSCOMSTF.DLL
NOTES.MST		MSTEST.EXE
CONFIG.MST		VER.DLL
EXPAND.EXE		RXWIN.INF
MSSHLSTF.DLL		MSDETSTF.DLL

Utility and Support Files
=========================
*.KMP			Keyboard settings files.
RXUS.HLP		Reflection X help file.
FONTMAN.EXE		Font compiler.
M*.DLL & M*.EXE 	Network files.

SXPROCESS Files
===================

		VMS systems

PC file name	Host file name	   Description
------------	--------------	   -----------

upldsxvx.rcl			   upload rcl script
sxproces.exe	sxprocess.exe	   executable for DEC VMS (DECnet)
sxproces.mul	sxprocess.exe	   executable for DEC VMS MultiNet
sxproces.ucx	sxprocess.exe	   executable for DEC VMS (TCP/IP)
sxvxovms.exe	sxprocess.exe	   executable for VAX OpenVMS (6.1) (DECnet)
sxvxovms.mul	sxprocess.exe	   executable for VAX OpenVMS (6.1) (MultiNet)
sxaxovms.exe	sxprocess.exe	   executable for AXP OpenVMS (6.1) (DECnet)
sxaxovms.mul	sxprocess.exe	   executable for AXP OpenVMS (6.1) (MultiNet)

wrquploa.mar	wrquploa.mar	   A receive-only Kermit program compiled
wrquploa.obj			   and linked on the host to assist in
wrquploa.exe			   the upload process.

sxpsessi.com	sxpsession.com	   sample DCL script for sxprocess.exe to
				   bring up a decterm.
vms.rc		sxprocessrc.	   sample resource file for sxprocess.exe
sxinstal.com	sxinstall.com	   DCL script for 'installing' sxprocess.exe
				   on VMS systems


		UNIX systems

PC file name	Host file name	   Description
------------	--------------	   -----------

upldsxux.rcl			   upload rcl script
sxproces.sun	sxprocess	   executable for Sun Solaris 1.x
sxproces.h7	sxprocess	   executable for HP 9000 series 700
sxproces.sgi	sxprocess	   executable for Silicon Graphics
sxproces.ris	sxprocess	   executable for DEC RISC Ultrix
sxproces.sol	sxprocess	   executable for Sun Solaris 2.x
sxproces.h3	sxprocess	   executable for HP 9000 series 300 & 400
sxproces.ibm	sxprocess	   executable for IBM RISC/6000

wrqkerm.c	wrqkerm.c	   A receive-only Kermit program compiled
		wrqkerm 	   and linked on the host to assist in
				   the upload.
sxproces.rc	.sxprocessrc	   sample resource file for sxprocess.
sxproces.sh	.XpressSession	   sample script file for sxprocess



"Recently ported but unofficial binaries have been added due to popular
demand. These are supplied for convenience only and are not officially
supported... "

sxproces.dg8	sxprocess	   executable for Data General 88K Aviion
sxproces.axp	sxprocess	   executable for DEC Alpha running OSF1
sxproces.esi	sxprocess.exe	   executable for IBM-PC using ESIX Unix
sxproces.sco	sxprocess.exe	   executable for IBM-PC using SCO's Unix


***************************************************************************
		       Technical Assistance
***************************************************************************

There are a number of ways to reach us--they are listed here and in the online
help for Reflection X:

	 - Phone our technical support staff at (206) 217-7000 or via
	   Internet at support@wrq.com

	 - On CompuServe, type GO REFLECTION and leave a message for SYSOP
	   in Message area 10:	Reflection X or upload a file to library
	   10: Reflection X.

	 - Sales questions can be answered via (206) 217-7100.


-----------
Diagnostics
-----------
There are several diagnostic tools in Reflection and in Windows that
will help WRQ resolve some of the problems you might experience while
using Reflection. The following is a list of these files and guidelines
on how to generate them, if necessary.


SETUP.LOG
=========
The Setup utility creates a file called SETUP.LOG in your Reflection
directory (C:\RWIN\SETUP.LOG for example).  If you experience
problems running Setup, be prepared to send a copy of this file to us.


LOGFILE.TXT
===========
Server errors and warnings that occur while running Reflection X are
captured in a user-specified log file.	If Log Font Activity is selected
in the Fonts category, the log file also records each font request and
indicates whether it was satisfied and with what font.	Refer to this
file by choosing SETTINGS, then SERVER; choose View to look at the file.
This file (LOGFILE.TXT) is erased each time you start Reflection X, so
you may want to save this file to send to WRQ with problem information.


ABOUT BOX
=========
Select About from the Reflection X menu.  Here you can determine what
IP address or node number the server thinks you are using, what transports
are currently available, what TCP/IP stack you are using, etc.

This feature may be useful, for example, if you attempting to use both
the DECnet and TCP/IP transports at the same time.  From the About Box,
you can determine if both transports are being recognized by the server.


DRWATSON.LOG
============
Dr. Watson is a diagnostic tool that comes with Windows.  Certain
system problems will call the Dr. Watson utility and generate a
file that is useful in debugging.

If you experience a problem that produces a General Protection Fault
in Reflection:
- Make sure that Dr. Watson is loaded.
- Attempt to reproduce the error.
- Dr. Watson should display a dialog box where you can enter a short
  description of what you were doing when the error occurred.
- This information is written to the file DRWATSON.LOG in the
  directory where Windows is installed.
- Be prepared to send a copy of this file to WRQ when you report
  the problem.

***************************************************************************
				WRQ Information
***************************************************************************

WRQ's U.S. address, phone, and FAX numbers are as follows:

Corporate address:
    Walker Richer & Quinn, Inc.
    1500 Dexter Avenue North
    Seattle, WA  98109

Phone numbers:
    Corporate:		    206-217-7500
    Sales:		    800-872-2829 or 206-217-7100
    Technical support:	    206-217-7000
    BBS:		    206-217-0145

Fax numbers:
    Accounting: 	    206-217-0681
    International:	    206-217-0196
    Sales:		    206-217-0293
    Technical support:	    206-217-9492

*******************************************************************************
			    Setup and Configuration
*******************************************************************************

Installing Reflection
---------------------
Use the Setup program to install Reflection.  There are two methods to choose
from:

Method 1 -- Run Setup from the Windows File menu.
	1. Select Run from the File menu.
	2. Type <drive:\path>SETUP and press <Enter> to begin installation.

Method 2 -- Run Setup from the File Manager.
	1. Double-click the File Manager icon.
	2. In the File Manager, select <drive:\path>SETUP.EXE.

Setup may make modifications to AUTOEXEC.BAT file.  If you have an existing
copy of Reflection X, changes may be made to the RX.INI and VSL.INI files.

*******************************************************************************
		      Known Problems and Workarounds
*******************************************************************************

 *  Out of memory errors

    If you get an out of memory error, check to see if Windows is
    configured to use a temporary or a permanent swap file.  It is probably
    best to have a permanent swap file with adequate memory to load
    Reflection X.  See "Software Requirements" in your Technical Reference
    (in the chapter called "Installing Reflection X").

 *  16-color display

    The recommended Color Model choice for a 16-color display is
    StaticColor.  The StaticColor model is used for displays that have an
    unchangeable hardware color palette.  With this sort of palette, all
    color cells are read-only and all RGB values are preset.  X client
    requests for a certain color will be mapped to the color that most
    closely matches.

    To change the Color Model, choose Settings from the Reflection X menu
    and go to the Color category.

 *  HP Visual Editor

    The HP Visual Editor "ved" will not run if the setting for Selection
    Bound to Clipboard in Reflection X is PRIMARY.  Configure this setting
    in the Clipboard category of the Reflection X Settings dialog box.

 *  Windows Client Installation

    When you install Reflection X to a Windows Client machine, Setup
    may fail if you are installing to a drive without a writeable root
    directory.

    The Setup program creates a temporary directory on the boot drive
    of the local PC from which you are running Setup.  Since a boot
    drive of a WinClient machine may not be writeable, you may need to
    issue the following command:

		    MAP ROOT C:=<available directory>
    for example:
		    MAP ROOT C:=G:\USERS\PUBLIC\MYNAME

 *  DECnet and Reflection Network Series for Windows

    If you are attempting to run DECnet concurrently with TCP Connection
    for Windows, you MUST have the keyword USEVSL= set to 1 in your RX.INI
    file for DECnet and WRQ's TCP Connection to run concurrently.  If
    USEVSL=0 is set, then DECnet will not be an available transport for
    Reflection X.

 *  Running Setup Under OS/2

    Reflection X includes a lot of font files and running the Setup program
    can take a while.  To speed up the installation under OS/2, make the
    following changes to CONFIG.SYS in your PC hard drive's root directory
    and then reboot your PC:
			      BUFFERS=100
			      PRIORITY_DISK_IO=YES

*******************************************************************************
		      Troubleshooting FTP for Windows
*******************************************************************************


FTP PC-TCP network interface:
-----------------------------
   When using the FTP PC-TCP network interface, you may have trouble
   opening a server connection if you are using a version of WINSOCK.DLL
   prior to version 1.06.  Choose Module Versions from the Reflection FTP
   Options menu to check the version number of your WINSOCK.DLL.  If
   WINSOCK.DLL is not at version 1.06 or later, add the following line to
   the [FTP Initialize] section in the RFTP.INI file:

		      AsynchConnect=No
