  
  ****************************************************************
  *                                                              *
  *  Before you run the Wildcat! program, first run the          *
  *  configuration program MAKEWILD to set up your data files.   *
  *  If you are upgrading from a previous version of Wildcat!    *
  *  you should follow the directions in the Upgrade section     *
  *                                                              *
  ****************************************************************

Version 4.11 of Wildcat! BBS incorporates many new features and changes. 
For a detailed description of new features, please refer to the Version 
4.11 Addendum booklet, shipped with this update.

This file contains information that became available after the manual 
was printed.  Please review it carefully.

UPGRADING FROM WILDCAT 4.0 TO 4.11 ONLY
=======================================
Version 4.01 and 4.11 have a minor structure difference in the
conference flags from version 4.0, and we have provided a program called 
CHKCONF that will check and update these flags if necessary.

You only need to run this program if you are upgrading from version 4.0 
to version 4.11 -- if you have already run it for the 4.01 or 4.10 
upgrade, you do NOT need to run it again.

To run CHKCONF, change to your Wildcat! home directory (normally 
C:\WILDCAT) and type

CHKCONF [Enter]

Allow up to a few minutes for this program to complete its operation. It 
will report successful completion when it is done.

You will notice with this release that we no longer are supplying the ARepair
utility, we have instead made it part of wcREPAIR for version 4.11.

Prompts added/changed in version 4.11
=====================================

The following prompts have been added or modified for version 4.11. The 
upgrade program will add these prompts to your prompt file 
automatically. The information provided below is for your reference if 
you choose NOT to overwrite or update your existing prompt files, so 
that you may add these prompts after customization. You can also run the
ZapPrmpt program to add all these new prompts to your current prompt file,
it will create a .OLD file for you.

Prompt # 194
  @0E@[@0F@ 1@0E@] @0B@Computer Type   @0E@: @0F@@SUB1@ @0E@[@0F@18@0E@] @0B@Quote reply    @0E@: @0F@@SUB2@

Prompt # 195
  @0E@[@0F@ 2@0E@] @0B@Alias           @0E@: @0F@@SUB1@ @0E@[@0F@19@0E@] @0B@Lines per page @0E@: @0F@@SUB2@

Prompt # 196
  @0E@[@0F@ 3@0E@] @0B@Title           @0E@: @0F@@SUB1@ @0E@[@0F@20@0E@] @0B@Msgs written   @0E@: @0F@@SUB2@

Prompt # 197
  @0E@[@0F@ 4@0E@] @0B@Sex             @0E@: @0F@@SUB1@ @0E@[@0F@21@0E@] @0B@Upload         @0E@: @0F@@SUB2@

Prompt # 198
  @0E@[@0F@ 5@0E@] @0B@New files       @0E@: @0F@@SUB1@ @0E@[@0F@22@0E@] @0B@Downloads      @0E@: @0F@@SUB2@

Prompt # 199
  @0E@[@0F@ 6@0E@] @0B@Total upld Kb   @0E@: @0F@@SUB1@ @0E@[@0F@23@0E@] @0B@Time left      @0E@: @0F@@SUB2@

Prompt # 200
  @0E@[@0F@ 7@0E@] @0B@Total dnld Kb   @0E@: @0F@@SUB1@ @0E@[@0F@24@0E@] @0B@Daily DL       @0E@: @0F@@SUB2@

Prompt # 201
  @0E@[@0F@ 8@0E@] @0B@Minutes logged  @0E@: @0F@@SUB1@ @0E@[@0F@25@0E@] @0B@Daily DK       @0E@: @0F@@SUB2@

Prompt # 202
  @0E@[@0F@ 9@0E@] @0B@Novell name     @0E@: @0F@@SUB1@ @0E@[@0F@26@0E@] @0B@Last conference@0E@: @0F@@SUB2@

Prompt # 203
  @0E@[@0F@10@0E@] @0B@Secondary # 1   @0E@: @0F@@SUB1@ @0E@[@0F@27@0E@] @0B@Locked out     @0E@: @0F@@SUB2@

Prompt # 204
  @0E@[@0F@11@0E@] @0B@Secondary # 2   @0E@: @0F@@SUB1@ @0E@[@0F@28@0E@] @0B@Never delete   @0E@: @0F@@SUB2@

Prompt # 205
  @0E@[@0F@12@0E@] @0B@Secondary # 3   @0E@: @0F@@SUB1@ @0E@[@0F@29@0E@] @0B@Logon siren on @0E@: @0F@@SUB2@

Prompt # 206
  @0E@[@0F@13@0E@] @0B@Secondary # 4   @0E@: @0F@@SUB1@ @0E@[@0F@30@0E@] @0B@Hide private   @0E@: @0F@@SUB2@

Prompt # 207
  @0E@[@0F@14@0E@] @0B@Secondary # 5   @0E@: @0F@@SUB1@ @0E@[@0F@31@0E@] @0B@Hide deleted   @0E@: @0F@@SUB2@

Prompt # 208
  @0E@[@0F@15@0E@] @0B@Read mail mode  @0E@: @0F@@SUB1@ @0E@[@0F@32@0E@] @0B@User capture on@0E@: @0F@@SUB2@

Prompt # 209
  @0E@Edit [@0F@1..34@0E@], [@0F@F@0E@]ind Alias, [@0F@S@0E@]earch Alias, [@0F@H@0E@]elp?

Prompt # 796
  @0E@Subj:

Prompt # 812
  @0E@[@0F@1..@SUB1@@0E@]=Replace, [@0F@S@0E@]kip always, [@0F@E@0E@]dit, [@0F@N@0E@]ext word, [@0F@Q@0E@]uit?

Prompt # 834
  @0E@Page user by [@0F@Node ### or Name@0E@], [@0F@ENTER=quit@0E@]?

Prompt # 835
  @0E@

Prompt # 836
  @0E@Page@0F@    : @0B@@SUB1@ @0E@of @0B@@SUB2@

Prompt # 837
  @0E@From    @0F@: @0B@@SUB1@

Prompt # 838
  @0E@ on node @0A@@SUB1@

Prompt # 839
  @0E@Subject @0F@: @0B@@SUB1@

Prompt # 840
  @0E@System page@0F@ @SUB1@ of @SUB2@

Prompt # 844
  @0E@Page sent to @SUB1@ on node @SUB2@.

Prompt # 848
  @0E@Select node [@0F@1-@SUB1@@0E@], [@0F@ENTER=quit@0E@]?

Prompt # 849
  @0E@Global system paging

Prompt # 854
  @0E@Checking for personal mail....

Prompt # 999
  @0E@You have new personal mail waiting.

Prompt # 1003
  @0E@Changed to conference @0F@@SUB1@@0E@.

Prompt # 1151
  @0E@[@0F@H@0E@]elp, [@0F@N@0E@]stp,

Prompt # 1200
  @0E@[@0F@U@0E@]pdate, [@0F@D@0E@]elete,

Prompt # 1304
  @0E@There are @0F@@SUB1@@0E@ bytes available in the upload area.

Prompt # 1429
  @0E@[@0F@16@0E@] @0B@Default language@0E@: @0F@@SUB1@ @0E@[@0F@33@0E@] @0B@Sorted lists   @0E@: @0F@@SUB2@

Prompt # 1435
  @0E@[@0F@ 7@0E@] - Page system wide ok    [@0F@14@0E@] - Maintenance mode

Prompt # 1594
  @0E@[@0F@C@0E@]ontinue, [@0F@N@0E@]onstop, [@0F@S@0E@]top, [@0F@P@0E@]revious?

Prompt # 1634
  File has been deleted from file area

Prompt # 1697
  @0E@You do not have enough credits to read messages in this conference.

Prompt # 1698
  @0E@You do not have enough credits to write messages in this conference.

Prompt # 1699
  @0E@Out of credit for this conference, unable to write more messages.

Prompt # 1700
  @0E@Insufficient account balance to download this file.

Prompt # 1701
  @0E@Insufficient account balance to download this attachment.

Prompt # 1702
  @0E@Insufficient account balance to upload an attachment.

Prompt # 1703
  [@0F@J@0E@]ump,

Prompt # 1704
  [@0F@M@0E@]ark,

Prompt # 1705
  @0E@@SUB1@ has been added to the marked file list.

Prompt # 1706
  @0E@[@0F@R@0E@]ead new mail (add @0F@*@0E@ for snoop), [@0F@L@0E@]ist new mail, [@0F@C@0E@]ontinue?

Prompt # 1707
  @0E@[@0F@R@0E@]ead new mail, [@0F@L@0E@]ist new mail, [@0F@C@0E@]ontinue?

Prompt # 1708
  @0E@[@0F@C@0E@]ontinue, [@0F@N@0E@]onstop, [@0F@P@0E@]revious?

Prompt # 1709


Prompt # 1710
  @0E@Use auto spell checking@YNDEF@?

Prompt # 1711
  @0B@Auto spell check @0E@: @0F@@SUB1@

Prompt # 1712
  Convert bulletin(s) to color@YNDEF@?

Prompt # 1713
  @0E@@SUB1@ @0A@@SUB2@ @0F@@SUB3@ @SUB4@

Prompt # 1714
  @0E@@SUB1@ @0A@@SUB2@ @0F@@SUB3@ @0B@@SUB4@

Prompt # 1715
                               @0B@@SUB4@

Prompt # 1716
  [29C@0B@@SUB4@

Prompt # 1717
  @07@(...continued)               @0B@@SUB4@

Prompt # 1718
  @07@(...continued)[15C@0B@@SUB4@

Prompt # 1719
  @0E@Enter the number of the group to toggle On/Off [@0C@*@0F@=Enabled@0E@]

Prompt # 1720
  NOTE: This message was originally addressed to

Prompt # 1721
        and a carbon copy was sent to you by

Prompt # 1722
                     -------------

Prompt # 1723
  [1;15HSearching @SUB1@-@SUB2@

Prompt # 1724
  @0C@>@0B@

Prompt # 1725


Prompt # 1726
  @0E@[@0F@A@0E@]nsi lister  : @0B@display files in a full screen Ansi file lister.

Prompt # 1727
  @0E@Alias you wish to use?

Prompt # 1728
  @0E@Sorry, "@SUB1@" can not be used.

Prompt # 1729
  @0E@Alias already in use.

Prompt # 1730
  CAUTION! You will be logged off if you do not continue within 60 seconds.

Prompt # 1731
  5 Minutes of no activity.

Prompt # 1732
  Your time limit is about to expire, please logoff.

Prompt # 1733
  Time limit expired.

Prompt # 1734
  Maintenance

Prompt # 1736
  @0E@New subject:

Prompt # 1737
  @0E@@SUB1@ removed from marked list.

Prompt # 1738
  @07@(continued...)               @0B@@SUB4@

Prompt # 1739
  @07@(continued...)[15C@0B@@SUB4@

Prompt # 1740
   @0B@Billing credits@0E@: @0F@@SUB2@

Prompt # 1741
  @0E@[@0F@17@0E@] @0B@Billing credits @0E@: @0F@@SUB1@ @0E@[@0F@34@0E@] @0B@Auto spelling  @0E@: @0F@@SUB2@

Prompt # 1742
  @0E@Current billing credit?

Prompt # 1743
  Use auto spell checking [Y/n]?

Prompt # 1744
  @0E@Wildcat could not quote the entire message, use manual quoting@YNDEF@?

Prompt # 1745
  @0E@[@0F@R@0E@]ead mail (add @0F@*@0E@ for snoop), [@0F@L@0E@]ist mail again, [@0F@C@0E@]ontinue with logon?

Prompt # 1746
  @0E@[@0F@R@0E@]ead mail, [@0F@L@0E@]ist mail again, [@0F@C@0E@]ontinue with logon?

Prompt # 1747
  @0E@That command is not available.

Prompt # 1749
  @0E@Send pages from?

Prompt # 1750
  @0E@   Page subject?

Prompt # 1751
  @0E@   Allow Replys @YNDEF@?

Prompt # 1752
  @0E@Page nodes [@0F@1-@SUB1@@0E@], [@0F@A@0E@]ll, [@0F@ENTER=quit@0E@]?

Prompt # 1753
  @0E@Sending global pages...

Prompt # 1754
  @0E@Sent 1 global page.

Prompt # 1755
  @0E@Sent @SUB1@ global pages.

Prompt # 1756
  @0E@That node is currently inactive.

Prompt # 1757
  @0E@Page subject?

Prompt # 1758
  @0E@Date    @0F@:@0B@ @SUB1@ @0E@at @0B@@SUB2@

Prompt # 1759
  @0E@Page read, [@0F@N@0E@]onstop, [@0F@W@0E@]rite,

Prompt # 1760
  @0E@[@0F@R@0E@]eply,

Prompt # 1761
  @0E@[@0F@P@0E@]rev,

Prompt # 1762
  @0E@(@0F@Last page@0E@)

Prompt # 1763
  @0E@[@0F@ENTER=next@0E@]?

Prompt # 1764
  @0C@Invalid read command.

Prompt # 1765
  @0E@You must use a secured password to log onto this node.

Prompt # 1766
  @0E@Subj?

Fixes: Wildcat! 4.11

You can search for filenames with _ characters in them.

Fixed a problem with user being able to logon with extra spaces in their
name, this would let them on the system but no-one could reply to any
messages they left.

Fixed a problem with Wildcat not allowing users to download bulletins
with number greater than three digits.

Fixed a problem with the FIDOENTR.WCX that would not accept the name
entered in the message or let the message be written.

Fixed a problem with wcCODE applications reporting an error when they
were stopped locally by a CTRL-Break, it is now reported in the activity log
and on the local screen, but not in the error log since it is not a real
error condition.

Fixed the questionaires to take commands from both menus and wcCODE.

Fixed the Ansi Lister so that if a command is not available in their 
security profile (i.e. viewing archived files) the Ansi Lister will not 
let them use those commands.

Fixed the message editor so that when you are quoting messages it will 
now wrap unquoted text, if a line is quoted previously the editor will 
truncate the line as it did before, this works for both auto quoting and 
manual quote selection.

Fixed the visual editor so that it no longer reformats lines that it has 
quoted, instead it now just pushes them down to a new line.

Fixed a problem with displaying .BBS bulletins when you were in RIP and 
wildcat not displaying a POSTRIP.RIP first.

Fixed a problem with shelling to doors in PRELOG.WCX, and Wildcat coming 
back with an error about USERREC.BIN not being found.

Fixed a problem with the Ansi lister where a user enter N L A or N D 2 A 
and the lister would hang on to the last character and pass it on after 
the lister was finished.

Tweaked the 5 minute countdown code for events to be less system intensive
on OS/2 systems.

Fixed the DisplayTextFile command in wcCODE so that it will allow the 
previous command to be used.

Fixed a problem with setting snoop mode from Makemenu and wildcat not 
checking access to the correct conference.

Fixed a problem with trying to download multiple files with a screen 
length of 0, Wildcat to do a loop until the user hung up in this situation.

Fixed the Ansi Lister so you can specify an area for it to start 
listing from.

Fixed the carbon copy routines so that they now put a banner at the top 
of the message stating who the message was to originally and who it is 
from. The CC: lines will now exclude the receiving partys name.

Fixed a problem with the 2 line descriptions sometimes getting split at 
the bottom of the screen.

Fixed a problem with the message reading prompt getting split on some 
messages.

Fixed a problem with a user being forced to upload twice if they had 0 
uploads and were over their up/down ratio.

Fixed a problem with the dynamic rip menus showing even when there were
RIP menus when a user called in using Rip with his screen type set to NO 
Color, and the BBS was set to forced rip.

Fixed a problem with user records containing fields like <<CITY causing
the sys/user screen to get skewed.

Fixed the UpdateFile command in wcCODE so it no longer changes the 
current group when updating a file.

Fixed a problem with sysop chat from an alias conference not getting the 
length of the users alias name correct and causing the split line in the
middle to be off.

Fixed a problem with downloading a large number of files locally causing 
a pause prompt.

Fixed a problem with the file listings not taking stack commands 
correctly.

Fixed a problem with the Ansi file lister showing extra characters when 
you would search on one file area.

Fixed the Ansi lister so that it now puts a + sign next to groups that 
are currently online.

The Ansi lister will now go to the next page when a user cursors left or 
right off the edge of the screen.

Fixed a problem with the file list choice in questionairres showing 
incorrect RIP prompts.

Fixed a problem with the Alias prompts in questionairres not working 
correctly under RIP.

Fixed a problem with the sysop screen showing the revision number after 
the version.

Fixed a problem with a user being in the full screen editor and
when they are about to run out of time it would just beep at them, it 
now beeps and displays a line of text on the bottom of the screen 
warning them that they are about to run out of time.

Fixed a problem with Wildcat not allowing a user to mark messages when 
they stopped a message search.

Long headers never showed that a message had replies, Fixed.

Fixed the local upload Y N A to use the yes and no characters from the 
language file.

Fixed the search routines to handle international characters.

Fixed the View archive file so that if you try to view a file that is 
part of an offline group it will tell you so. Added the same 
funcionality to read a file.



Fixes: MAKEWILD

Fixed a problem with the spacebar not working for the third fields of 
the conf and file area settings in sec global profiles.

Makewild now checks the conferences set for a security profile when the 
user is editing the conference settings, if they have no conferences set 
Makewild pops up a warning box telling the user that Wildcat will not 
allow anyone with this profile to log onto the system.

Makewild now forces the packer extension into upper case letters.

You can now move file areas and conferences in Makewild, under the conference
listings and file area listings is an F7 key that will allow you to move
things around.

Fixes: wcMAIL

Changed a prompt:

Prompt 53 
  There is more than one @SUB1@, you must specify the file area with [FILENAME AREA]

Changed the your settings option to encompass all listings that wcMAIL 
makes so that the user does not have to login with mono to get 
non-colored listings.

Changed two prompts to handle this:

Prompt 217
  @0B@Download all lists in color    @0E@: @0F@@SUB1@

Prompt 218
  @0E@Would you like to download all lists in color@YNDEF@?~

Fixes: wcCHAT

wcCHAT will now show alias names when using the /List or /User command 
and the user is in a Alias conference.

wcCHAT now allows a user to send pages to an alias name if they are in an
alias conference.

Fixes: wcPACK

Fixed the problem with wcPACK sometimes getting the last read pointers wrong
when renumbering a conference with the /A option.

Fixed a problem with wcPACK not linking the first message in a conference into
the unread chain.

Fixes: wcFILE

Made a change to wcFILE so it no longer says ERROR READING
GROUPS.DAT when it is incorrectly trying to access the ALLFILES group. 
It now posts a message that file requests cannot belong to the ALLFILES 
database, and deselects them from the selected list.

Fixed File Request Processing to correctly use alias names if conf 0 is 
set up as an alias conference.

Fixed Description File Processing so it no longer addes a long 
description if the description fits completely within the short 
description field.


Fixes: wcNODE

Fixed a problem with the On Locally flag reflecting the MNP flag.

Fixed a problem with wcNODE not showing the MNP connection correctly.


Fixes: wcDRAW

Fixed @VER@ to show correct version number


Fixes: MAKEMENU

MakeMenu now closes the filearea.dat/confdesc.dat/seclevel.dat files 
upon dropping to dos.

On both the 'Read Message' & 'Search Message' command types, Makemenu 
wouldn't reflect on the menu listing whether Snoop mode was turned on. 
This was fixed.


Fixes: wcECHO

wcECHO will now allow you to run MAKEECHO's Translation editor while it 
is processing mail. No more 10410 errors trying to open translation 
database.

Fixed a bug with exporting duplicates of lines at the end of a message. 
This was a result of 'hidden kludge lines' added to these messages via 
WildMail and other 3rd party FIDO tossers, and wcECHO now changing the 
size of the message when it was stripping those lines on export. IN this 
and the last few versions, if the conference is set for 'showing ctrl 
lines' wcECHO will export those lines as wcMAIL does.


Wildcat! 4 Sysop Guide, 7/1/94 printing only. 
--------------------------------------------- 

- page 384 contains an incorrect filename for the batch file used to 
  import descriptions from uploads.  The correct filename is 
  FILEDESC.BAT (not descfile.bat), and is listed incorrectly in the 
  discussion and the example text.

- page 504 contains two descriptions for the FILEDESC.BAT file, one 
  immediately following the other.  Only the second is correct.  Please 
  remove the first description given for the FILEDESC.BAT file.

- page 261 indicates that the @CALLID@ variable can be imported to a 
  user record using the questionnaire facility.  This is incorrect (at 
  this time). The variable can be displayed and is placed in the 
  activity log.

Later printings of this manual correct these errors.

The 11/1/94 printing of the Wildcat! Sysop Guide has full information on 
using wcPACK while the system is running. This information was 
inadvertently omitted from previous versions of this readme file. Here 
is an overview of wcPACK operation:

wcPACK
Message management tool

When to use wcPACK

Wildcat!'s message files require only minimal maintenance about once a 
week or so, to purge old and deleted mail from the message files and 
keep them from growing too large. 

The program wcPACK comes in two versions: a "real mode" version for 8088 
and higher PCS, called WCPACK.EXE, and a "protected mode" version for 
80286 and higher PCs known as WCPACKX.EXE. The protected mode version is 
able to use all the available memory on your system for fastest possible 
operation.

wcPACK is designed to help you manage your message files. You can run 
this program from the DOS prompt, or from a batch file during a system 
event.

Special considerations for multi-line operation

wcPACK can be run with other nodes up for most operations, provided that 
it has its own unique Node ID. You can also run it when nodes are down 
or in maintenance mode. However, since Conference 0 is used for 
system-generated messages as well as caller messages, wcPACK will not 
pack confernce 0 unless all nodes are down. Also, you cannot renumber 
messages unless all nodes are down, because wcPACK needs to access the 
user database as well as the message files for this function.

You can use the /S "set timeout" command line switch to set a maximum 
number of minutes to wait for a conference to become available for 
packing.

wcPACK creates lock files for the conferences you ask it to pack, and 
checks every few seconds to see if all users are out of the conference 
before it begins packing. When a conference is locked, Wildcat! displays 
a message to the caller that the conference is currently unavailable.

Synchronizing mail tossing and mail packing

Mail tossing by wcGATE, wcMAIL and wcECHO can take place during message 
packing, even when wcPACK is processing an echomail conference at the 
same time one of the other programs is tossing mail into it. The mail 
tosser will create a temporary directory under your WILDCAT home 
directory called MSGLOCK, and creates temporary message files into which 
it imports messages. 

When wcPACK releases the message data file, you will need to merge the 
temporary message tossing file back into the freshly-packed message data 
file. When message tossing has completed, use the /N command line switch 
in wcPACK to update message data files with the new messages.

Command line options

Like most other Wildcat! utility programs, wcPACK displays a list of 
command line options when you type

WCPACK /? [ENTER}

Here is a list of wcPACK command line options:

Switch	Operation
/A	Process all conferences
/B	Create renumber backup files 
/C:[name]	Configuration file for automatic packing
/D ###	Delete messages older than ### days
/E	Kill private received messages
/I	Display rebuild statistics
/K:#####	Keep ##### messages
/L	Last messages read repair mode
/N	Toss saved messages to system
/R	Renumber and pack specified conferences
/S:###	Set wcPACK timeout in minutes
/T	Kill received file attachments

Examples

Deleting messages by number

wcPACK will trim the size of the message data file by deleting old mail. 
For instance, if you want to trim message conferences 1 through 5 and 
keep only the newest 500 messages in each one, use a command line like 
this: 

WCPACK /K:500 1-5 [Enter]
or
WCPACK /K:500 [Enter]

Deleting messages by days old

Another way to use wcPACK is to delete messages based on age. If you 
want messages in conferences 1, 2 and 3 to have a lifespan of 30 days, 
try the following command line:

WCPACK /D:30 1-3 [Enter]

Saving your commands in a configuration file

Instead of typing the command line each time, you can save your command 
lines in a configuration file. wcPACK will process each command in 
order. The configuration file can have any name you want.

Here is an example of a wcPACK configuration file that performs several operations:

1 	Pack conference 1
2 	Pack conference 2
30-40 /t	Pack conferences 30-40, and delete received attachments.
/R 0	Pack and renumber conference 0

Load the configuration file like this:

WCPACK /C:FILENAME.CFG

Renumbering

Wildcat! can store a maximum of 65520 message numbers in each conference 
area before the message file fills up -- at that point Wildcat! can't 
add any more records to the message file and will report an error. 

If, for example, the range of message numbers in a conference goes from 
62531 to 64362, you can reset the starting and ending message numbers 
from 1 again by renumbering the messages. The Renumber command switch is 
/R.

Safety backup mode during renumber

Ordinary message packing procedures rarely cause problems, since the 
affected message data file can easily be rebuilt using wcREPAIR. 
Renumbering, however, also affects your user database files ALLUSERS.DAT 
and .IX, and USERCONF.DAT. 

You should not renumber your message data files until there is a clear 
need to do so. Daily or weekly renumbering increases the likelihood that 
a system error could corrupt your user and message data files. A power 
failure or disk error during renumbering can cause serious data 
corruption. We strongly recommend making a backup of your user data 
files before renumbering.

wcPACK has some additional command line options you can use during 
message renumbering that will create backup files during the operation, 
and report errors or inconsistencies when the renumbering has been 
completed. Both options require sufficient additional disk space for the 
backup files. 

/B Create renumber backup files

When wcPACK renumbers messages, it must also reset the high message 
number for each user record, in each conference. To do this, wcPACK 
creates a temporary file as it renumbers messages with the name of the 
message data file and the extension .REB, and uses this temporary file 
to update the user file.

/L Restore user message pointers from .REB files

If for some reason wcPACK is unable to complete the process, one or more 
.REB files will be left on the disk. You can restart the user record 
update without having to go through the entire renumbering process by 
using the /L command line switch. wcPACK will clean up its temporary 
files when it successfully completes the job.

Recovering from a system crash

If a system error or power failure interrupts wcPACK, some temporary 
files may be left behind that can prevent callers from accessing certain 
conferences. To recover from a system crash, follow this procedure:

Change to the MSGLOCK directory below your WILDCAT home directory, and 
delete all the .LCK files.

Run wcREPAIR on any message data files that were being packed or 
renumbered at the time your system went down.

If you were renumbering, run wcREPAIR on your user data file as well.

If you used the /B command line switch when renumbering, your callers' 
message pointers for each conference will be stored in temporary files 
ending in .REB. Start wcPACK again with the /L command line switch to 
update the callers' high message pointers properly.


Wildcat! 4.10 fixes
-------------------

- Questionnaires now use @LOGOFF@ correctly.

- Fixed a problem with turning on the capture file in a wcCODE app.

- Wildcat! will now lower DTR when it is in auto answer mode, for 
  improved support of X.25 and other systems.

- You can now only kill message attachments that are yours or if you are 
  a Sysop.

- Fixed a problem with overwriting files when uploading into an area.

- Wildcat! now notes the conference number in the error log when it can 
  no longer add messages to a conference.

- Fixed a problem with marking files using stack commands that would 
  only mark the first file.

- Wildcat! allowed users to do non-stop file listings past their time 
  limit. Fixed.

- Fixed a problem with doing a previous on an IFSEC command in a text 
  file.

- Fixed a problem with uploading a file and there are duplicate files, 
  if you were prompted for a list and hit Q to quit Wildcat! would go 
  ahead and process the upload.

- Fixed a problem with the full screen editor making the edit window too 
  large when a user in RIP mode had his lines per page set high.

- Internal Zmodem now sends the batch information if the caller is using 
  GSZ.

- Wildcat! sometimes reported file attachment successful even when there 
  was a problem. Fixed.

- Wildcat! counted blank entries in a group list when sending group 
  mail. Fixed.

- Fixed a problem with NODEINFO sometimes getting locked and not letting 
  go.

- Fixed a problem with Wildcat! showing a user as being the 9999th 
  caller and logging the caller as 9998.

- Fixed a problem with Wildcat! reporting an error when you attached a 
  file to a message that had a previous attachment deleted.

- Wildcat now copies the file attachments when you send group mail, this 
  prevents the problem of one user deleting the attachment and no one 
  else begin able to get it.

- Fixed a problem with RIPscrip incorrectly counting lines ending in a 
  \.

- Message reading prompt now handles stacked commands.

- Changed the command for sending a menu file so that if the user 
  chooses a command to send a menu file it is sent regardless of their 
  security setting

- Fixed the problem with some prompts not being erased when using a 
  display file for certain prompts.

- Wildcat! now allows you to enter messages without a subject in an 
  Interment E-mail conference.

- Fixed problem with some wcCODE files not specifying the home Wildcat! 
  path.

- Found and fixed the problem with changing a user's security profiles 
  and then Wildcat! setting their time left to a high number.

- Fixed a problem with user pages getting a garbage character at the end 
  of the page.

- Added a time stamp to the routines that log modem errors.
  
- Wildcat! sometimes reported an error opening LANGDESC.DAT file. Fixed.
  
- Fixed a problem with the double file listings that would cause some 
  files to put an extra space in the display.

- When Wildcat got within 5 minutes of a soft event it would start 
  checking the event file continuously, causing unnecessary file access 
  on LANtastic systems. Wildcat! now checks every 30 seconds if a soft 
  event is scheduled to go off in 5 minutes or less.

- Changed some of the prompt handling code to deal with long path import 
  files.

- Fixed a problem with Wildcat! showing the wrong ratio when a user is 
  over their KByte ratio.

- Fixed a problem with conferences not being available and Wildcat! not 
  cleaning up the display.

- Fixed the problem with read/scanning messages backwards and the last 
  read pointer being set.

- Fixed Wildcat! so that if you lockout the DEFAULT user it does not set 
  that flag when a new user logs in.

- When typing in filenames for downloads, if you got the first file and 
  not the second and then the third, Wildcat! would put one file in the 
  mark list twice. Fixed.

- Fixed Wildcat! so that when printing a message no longer sends LF 
  after the form feed.

- Fixed the routine that displays CONFLSTn.BBS and FILELSTn.BBS so that it 
  will send them regardless of the users expert level.

- Fixed a problem with marking files and then uploading where Wildcat! 
  would lose the marked files.

- When specifying a file area to list in MAKEMENU, Wildcat! defaulted to 
  a single line display. Fixed.

- Two line file listings no longer split the descriptions at the wrong 
  location and break up words, also if a file does not have extended 
  info, the description will not be chopped for the Info flag.

- When jumping to a user record from the Sysop/file menu Wildcat! 
  sometimes lost the user's access (or just lost the user). Fixed.

- Fixed a problem with upgrading a user's security in chat and their 
  time on-line getting set out of whack.

- Fixed the problem with Wildcat! not sending a POSTRIP.RIP when it was 
  a RIP version of PRESRCH did not exist.

- Fixed a problem with Snoop mode not being set from MAKEMENU.
  
- Fixed the Write to user in file info so that if the user does not 
  leave a message no note is added to the activity log.

- Fixed QUESDATE and QUESCLOSE to show POSTRIP.RIP in rip mode.
  
- Fixed a problem with message thread that would sometimes drop the node 
  to DOS.

- Fixed problem with menu system allowing menu access even if the caller 
  does not have menu access. 

- Found a problem that would cause #100 errors in NODEINFO or CONFDESC 
  after a user came back from a door or DOS shell.

- If you had access to a menu through a secondary profile and then 
  shelled to DOS (or a door) you would lose your access. Fixed.

- When you entered a number of filenames and then uploaded, Wildcat! 
  would stop with a continue prompt.

- Found and fixed a problem with users being allowed overwrite access 
  even when they have all overwrite options turned off.

- Found and fixed the problem with Dynamic Rip Menus getting the font 
  size incorrect if you used RIPterm.

- Fixed a problem with LOGON1 and LOGON2 WCX files not being executed if 
  you terminate on your doors.

- Found and fixed the problem with a user being logged out twice in the 
  activity logs.

- Fixed a problem with killing messages always killing messages in 
  conference 0 no matter what conference your are joined to.

- Fixed a problem with monthly events wrapping over to the next year and 
  hanging the system.

- Fixed a problem when giving a user a secondary profile it would report 
  the Sysops name and not the user's.

- Fixed a problem with No Network setting losing file handles in doors.
  
- In some situations the capture file would not close, and lost file 
  handles. Fixed.

- Fixed a problem with users logging in with a #255 character in their 
  name.

- Fixed a problem with Wildcat! hitting a CD ROM changer even if the 
  device was in the drive table.

- Fixed the problem with names like 'OS/2' not being inserted in the 
  search index.

Changed the following prompts:
  
Prompt #125

ANSI: @0E@[@0F@~6@0E@]~@0B@Last~message~read~~~~@0E@:~@0E@@SUB1@

RIP: ^B|c0B|@9I4N@SUB1@

Prompt #126

ANSI: @0E@Edit~command~[@0F@1..6@0E@]?~

Prompt #241 

ANSI: @0E@[@0F@~5@0E@]~@0B@Packer~format~~~~~~~@0E@:~@0F@@SUB1@~@0E@ [@0F@11@0E@]~@0B@Show~script~commands~~@0E@:~@0F@@SUB2@

Prompt #242 

ANSI: @0E@[@0F@~6@0E@]~@0B@Export~private~mail~@0E@:~@0F@@SUB1@

RIP: ^B|c0B|@5M3R@SUB1@

Prompt #245

ANSI: @0E@Edit~[@0F@1..11@0E@],~[@0F@H@0E@]elp?~

Prompt #331

ANSI: @0E@Record~#:~@0B@@SUB1@~~~~~~~~~~~~~~~@0E@Group:~@0B@@SUB2@

Prompt #349

ANSI: @0E@[@0F@G@0E@]roup,~[@0F@S@0E@]earch,~[@0F@N@0E@]ext,~ [@0F@F@0E@]ind,~[@0F@R@0E@]ead,~

Prompt #350 

ANSI: [@0F@M@0E@]atch,~[@0F@D@0E@]elete,~[@0F@P@0E@]rev,~ [@0F@J@0E@]ump,~[@0F@V@0E@]iew,~[@0F@C@0E@]opy,

Prompt #351 

ANSI: ~[@0F@U@0E@]ser,~

Prompt #352 

ANSI: [@0F@Q@0E@]uit,~[@0F@1-25@0E@]~?~

Prompt #720 (RIP)

RIP: ^B|Y00000100|1B00000201EU020F000F080300000F07000000| 1UEQ88H88O2B00<>Stop<>S^M

Prompt #930 (RIP)

RIP: ^B|1B00000201EU020F000F080300000F07000000| 1U6C7H8A7X2900<>QUIT<>Q^M

Prompt #1081 (RIP)

RIP: <<prm#1081.rip

Prompt #1082 (RIP)

RIP: <<prm#1082.rip

Prompt #1102

ANSI: @0E@Enter~password~for~file~@SUB1@?~

RIP: @0E@Enter~password~for~file~@SUB1@?~

Prompt #1107 (RIP)

RIP:

Prompt #1199 (RIP)

RIP: ^B|1B00000201EQ020F000F080300000F07000000| 1U3W886Y8O2F00<>Write~Author<>W^M

Prompt #1200 (RIP)

RIP: ^B|1B00000201EQ020F000F080300000F07000000| 1U7888AA8O2D00<>Update<>U^M|1UAK88DM8O1W00<>Delete<>D^M

Prompt #1201 (RIP)

RIP: ^B|1B00000201EQ020F000F080300000F07000000| 1UDW88GY8O2B00<>Sysop<>S^M

Prompt #1202 (RIP)

RIP:

Prompt #1217

ANSI: [@0F@L@0E@]ist~file~areas,~[@0F@H@0E@]elp,~[@0F@Q@0E@]uit,~ [@0F@ENTER~=~All~file~areas@0E@]?~

Prompt #1281 

ANSI: @SUB1@~is~currently~offline.

RIP: @SUB1@~is~currently~offline.

Prompt #1282 

ANSI: Would~you~like~to~make~the~file~available~at~a~ later~time@YNDEF@?~

RIP: Would~you~like~to~make~the~file~available~at~a~ later~time@YNDEF@?~

Prompt #1331 

ANSI: @0E@List~[@0F@a@0E@]ll~areas,~[@0F@L@0E@]ist,~[@0F@H@0E@]elp,~ [@0F@Q@0E@]uit,[@0F@ENTER~=~Start@0E@]?~

RIP: <<prm#1331.rip

Prompt #1448 

ANSI: [@0F@X@0E@]fer,~[@0F@H@0E@]elp,~Fr[@0F@e@0E@]shen,~ [@0F@A@0E@]dd,

Prompt #1519 (RIP)

RIP: CD-Rom~~~~~~



MAKEWILD

Changes

- If you copy a conference or file area, MAKEWILD will now give you the 
  option to copy all the security settings as well.

- Fixed a problem with toggling the global security flags for 
  conferences and file areas.

- Fixed a problem with MAKEWILD sometimes getting error 100's when 
  resizing USERCONF.DAT.

MAKEMENU

Changes

- Fixed a bug with the characters picklist not allowing you to choose 
  selection keys that were used on previous menu commands that now don't 
  exist.

wcDRAW 

Changes

- updated WCDRAW.DAT for new display and help files
  
- Fixed Paste bug in file editor
  
- Fixed bug where menu file names could have an embedded space.
  
wcREPAIR 

New features

- Added selection list for multiple file databases.
  
MAKEQUES

Changes

- Fixed a bug related to adding new secondary profile change value.
  
- MAKEQUES now displays whether a question has an import file or chains 
  to another questionnaire while in Test mode.

wcCHAT 

Changes

- You can now place a UserID in the moderator field. Previously, you 
  could only place an actual name.

wcMAIL

Changes

- Message lines starting with << that weren't valid .IMP lines were 
  being omitted from the QWK packet. Fixed.

- When downloading a QWK packet, wcMAIL will now refresh the cached mail 
  waiting flags so it will get any new messages that have just appeared.

- Fixed problem with reporting wrong error when the node was taken down 
  for maintenance.

- Fixed problem with the ability to add/drop conferences if the user did 
  not have "write" access to the conference.

- Fixed problem with detailed logging toggle not working correctly.
  
- Fixed runtime error when entering conference numbers that were too 
  large.

- Fixed problem with renaming local packets so it won't try to create a 
  file with a .QW[ extension (which causes PKZIP to have a bad day).

- Fixed the /download switch so if you also specify /overwrite or 
  /rename, the ask prompt will be skipped.

- Fixed a problem with requesting files attached to messages — if there 
  were no other messages to download, you would not get a packet.

- The packet size is now displayed before the download starts.
  
- The wcMAIL file listings now match Wildcat's listings in color and 
  formatting. Also the first character in the long description is no 
  longer truncated.

- Carrier is now monitored when setting message pointers by date (this 
  can sometimes take a while and users are bound to hang up on it now 
  and then).

- When running wcMAIL directly from the command line, an invalid user 
  name is now logged to the activity log instead of the error log.

- The line "CONTROLTYPE = CONFIG" is now written to DOOR.ID so QWK 
  readers will know that they can use "CONFIG" style control messages.

- You can now no longer start wcMAIL from the command line with a user 
  name if there is currently somebody logged into the node. This 
  prevents problems where a Sysop would shell out and run wcMAIL prescan 
  for somebody else, which would overwrite the Sysop's information in 
  the NODEINFO.DAT file and cause all kinds of problems.

- Files in the file database now have their download count incremented 
  when they are requested through wcMAIL.

- Fixed a problem where if you went into wcMAIL with a bunch of stacked 
  commands from Wildcat, it would still give you a -Pause- prompt.

- Capture is now properly supported in wcMAIL, including when creating 
  the SESSION.TXT file.

MAKEECHO 

Changes

- When deleting a Tagline from the picklist, MAKEECHO will now update 
  the QWK conference settings appropriately. Also fixed a whole bunch of 
  tagline deletion issues.

wcFILE

- A new program AREPAIR is designed to rebuild groups database in the 
  event it becomes corrupted. Run AREPAIR in your Wildcat! home 
  directory (normally C:\WILDCAT) if your error log indicates a damaged 
  groups database. 

wcECHO 

Changes

- Fixed a bug with incoming translations and there being more than one 
  translation for the same name.

- Fixed a problem with reporting 0 messages imported due to duplicates.
  
- Fixed a problem with appending to an existing REP packet with an 
  ATTXREF.DAT file already existing.

- wcECHO will no longer delete an empty ATTXREF.DAT file from a REP 
  packet.

- Fixed a problem with attachments in rep packets.
  
- This version checks whether it is reading the correct version of 
  MAKEWILD.DAT and will halt with an error if it is running with an 
  incorrect version of MAKEWILD.

- Fixed a bug with receiving an error 105 when exporting a QWK packet 
  and your attach limit was set to 0. The error said it was unable to 
  write to the MSG file.

- Fixed a problems when lines are exactly 79 characters.
  
- Fixed translation problems with importing and the translation had 
  apostrophes in it.

- Tearbar detection now counts the number of contiguous hyphens at the 
  start of the line. If the number of -'s at the start of the line is 
  not 3 then it assumes the line is not a tearbar.

- Fixed a bug with alias conferences in QWK.
  
- wcECHO will now broadcast messages using Netwares broadcasting 
  features to users who receive mail.

WC4UTI 

Changes

- Fixed a bug reading MAKEWILD under certain conditions.
  




Wildcat! v4.01 additions and fixes, not in the manual 
-----------------------------------------------------

New Features

- Added the ability to run wcPACK while the system is operational and
  taking calls.
- Added the ability for Wildcat! to look for .WCX files BEFORE running
  .BAT files such as THMBNAIL.BAT or LOGON1.BAT etc etc. This also applies
  to all doors and menu hooks.  It allows substitution of .WCX code for
  every system batch file.
- Wildcat! now creates dynamic clickable RIP menus if custom RIP menus
  are not found.  In this case Wildcat! will first display a background
  file with the same name as the current menu with the extension .RMB
  instead of .RIP.  For instance, if your menu is MAIN.RIP the program
  will look for MAIN.RMB to display as the background, it also uses the
  menu extension the same way as the regular menus.
- Added new RIP settings in the new Makewild. You can once again turn rip
  completely off.
- Added a /R command line option that allows you to run WCX files
  directly from the command line, the format is as follows:
       /R PROGRAM.WCX [PARAMETERS]
- Added a /U command line option that allows you to login with a username
  and password.
- Added a new wcCODE file called PRELOG.WCX that runs just BEFORE the user
  is asked for a name and password.
- Wildcat! now logs the Caller ID Number for illegal logon attempts,
  for password and for birthdate and phone information.
- Changed the way Wildcat! deals with batch files that are run as
  events.  If you do not specify a path to your batch file, Wildcat!
  will look in the Batch directory for the file, if you do specify a
  path then it is picked there and run.
- Added the ability to change the WILDCAT! MAIL ROOM text by placing it in
  the prompt file, one word of caution though: if you change it you will
  invalidate some message because Wildcat! looks for that specific text when
  handling wcMAIL messages.
- Added a new @ code called @FAX@ that displays the users fax number.
- Added a new drop file for internet e-mail called INETENTR.BAT, this works
  EXACTLY the same way that FIDOENTR.BAT works except for the name.
- Added a new environment variable called WCPROMPT, it is the path where you
  want Wildcat! to look for the WILDCAT.PRM and WILDCAT.MNU files. So for
  example
           SET WCPROMPT=D:\LANGUAGE
  will make Wildcat! look on device D for the prompt and menu files, this
  allows you to place them in a RAM drive.
- Added a new feature so that when you are listing files and the user presses
  'D' to download and they are asked for a filename they can type in the
  file number and it will be added to the list.
- Changed the login routines so that you can now use a comma to separate names
  and passwords.

Changes
-------
There are several program fixes that we view as significant.  In
addition there are many less important changes relating to minor
anomalies and cosmetic operation that are listed as well. The main
operational problems that were addressed include:

- Fixed the upgrade program in several areas to ensure the best conversion
- Fixed a problem with changing secondary access in doors.
- Fixed a problem with secondary accesses being lost on the return from a
  door under some situations.
- Fixed a problem with Wildcat! leaving the BadNames file open in certain
  cases.
- Fixed the long info on a file so that if the system cannot find the
  uploader it does not offer the [W]rite option.
- Fixed the problem with uploads losing memory during FILEDESC.BAT
  processing.
- Fixed the update conference routine so that it is as fast as possible,
  it is at least 20 times faster than it was before.
- Fixed a problem with uploading duplicate files and using the allow
  dupes setting.
- Fixed the problem with new users logging in with a different language
  and Wildcat! not keeping the language through the newuser login.
- Fixed a problem with users being able to select internal protocols
  when they did not have access.
- Fixed a problem that sometimes allowed users incorrect access to
  conferences.

WcMail 4.01
-----------

- Fixed tagging problem when downloading net-status packets.
- Fixed problem with yes/no characters when using languages other than
  English.
- Now only updates last-new-files date after a successful download.
- Network sysops will now properly get attachments.
- Now updates last-read pointer when downloading personal only mail
  (even though it is not necessary).
- Now properly handles Daily Download and Daily KByte set to 0 when
  processing file requests.
- When selecting a particular conference number, the conference list
  display will be updated to show the conference just changed.
- Now properly shows autologoff status when uploading a REP packet.
- Fixed problem with adjusting a user's time within the door.
- The version reported with @VER@ is now just '4.01' without 'MP'.
- Fixed problem with accepting some messages longer than 150 lines.
- Dupe checking no longer includes taglines in the message body.  This
  will eliminate many of the dupes
- Fixed infinite loop problem with long file descriptions.

MakeMenu 4.01
-------------
 New Features

- MakeMenu will now let you print from the menu tree picklist.
- MakeMenu can now edit up to 65520 lines in the Menu Tree.  This means
  you could conceivably have 65520 menus defined.
- MakeMenu has a new option 'F7' on the menu tree screen.  This new option
  allows one to insert a default menu system over the current menu system.
  This new menu system is the same as the one on the production diskettes.

 Fixes

- Added the @INCHAT@ variable to the Test Menu mode.
- Added support for the language directories in the bulletin/questionnaire/
  display/help file paths.
- MakeMenu is now overlaid.  The reason for this is simply memory
  requirements. MakeMenu utilized much more memory than it should have
  if you had a fairly complex system.
- MakeMenu will no longer do strange things in the test mode if you have a
  command to display text file and it doesn't have any parameters.
- MakeMenu will now let you edit up to 40 characters for the text file name
  in the display text file command.
- Under display text file, you can include a full path and filename.


WcRepair 4.01
-------------
 Fixes

- Fixed a bug related to having 18 or 19 conferences defined in makewild.
- Fixed a bug related to the doors in use flag.



Wildcat! v4.0 additions not in the manual
-----------------------------------------

- Additional command line switch, added /D for DEBUG mode, displays memory
  available and stack available in the lower right of the status line.

- An additional field was added to MAKEWILD Modem Settings.  We now
  allow you to control how many characters are TRANSMITTED (during
  caller downloads) with each interrupt if a 16550 UART is in use.
  Previously only the RECIEVE FIFO was configurable to prevent UART
  overuns during uploads.  The new transmit FIFO setting can be changed
  from the default of 1 (the v3 standard) to increase performance in
  many systems.  It is absolutely required for operation under Windows
  and OS/2 (see additional notes later in this document), and we
  encourage you to experiment with settings of 1, 4, 8 and 14 on your
  system. DESQview systems using 16550 UARTS may not operate as
  efficiently with a setting of 14.

        Trigger level for receive FIFO buffer    : 4
        Trigger level for transmit FIFO buffer   : 1

- There is now an option to encode user passwords so that no one can
  view them, from within Wildcat! or by looking at the ALLUSERS file on
  disk. Encoding is a ONE-WAY process. Once you have encoded your user
  passwords you will not be able to return to un-encoded passwords
  without having all users log on again as new users! This option is
  specifically for installations where the user record file is
  accessible by a number of individuals, and the sysop does not want
  them to be able to know the passwords of everyone on the system. If
  encoded passwords are enabled the sysop can change any user password
  but cannot view the password.

- There is now an option to allow duplicate user names in the system.
  Every user name is associated with an internal user ID, allowing
  duplicate names, if desired. However, duplicate names cause
  significant problems for mail notification on QWK-based echomail
  networks and support for QWK echomail is removed if duplicate names
  are enabled. If you want to use any QWK-based echomail do NOT turn on
  duplicate name support!

- Added an option to force the BBS to stay in RIP mode when it has been
  detected at logon rather than change back to ANSI or TTY if the
  caller's settings are not for Autodetect or RIP.  Enabling this option
  is encouraged if you make use of the custom RIP prompts since it
  forces the caller into Novice mode (so that he can see the menus),
  turns off keep header in the message bases, turns off hot keys and
  enables the Full Screen Editor. These settings are NOT made a
  permanent part of a user record, but are in effect for a single RIP
  call only.

- The HELP files that are sent to callers end in the extension .BBS and
  are located in the directory for help files as indicated in the manual.
  Do not confuse these files with those ending in .HLP which are the
  program help files when the F1 key is pressed, and belong in the same
  directory as the program files to which they belong.

- Changes were made in the display files for wcCHAT to be consistent
  with the wcMAIL display file operation.  CHAT.BBS is the display file
  that is sent immediately when a caller selects the wcCHAT program,
  before he enters the program.  WCCHAT.BBS is the display file that is
  sent by wcCHAT.EXE when a caller actually gets into the program.

  The wcDRAW program properly references these changes, however the
  display file table in the manual is not correct for these two files.

- Changes were made in the display files for wcMAIL to be consistent
  with the wcCHAT display file operation.  MAIL.BBS is the display file
  that is sent immediately when a caller selects the wcMAIL program,
  before he enters the program.  WCMAIL.BBS is the display file that is
  sent by wcMAIL.EXE when a caller actually gets into the program.

  The wcDRAW program properly references these changes, however the
  display file table in the manual is not correct for these two files.

- Added a new program to replace WAIT! and WAITFOR!

 wcWAIT

  The functionality of this program has increased.  It now performs all
  the tasks of both WAIT! and WAITFOR!, as well as acting as a 'check'
  program to determine when all nodes have come down for maintenance.
  The new command line options are:

  Usage: wcWAIT [options]
  Options are:

    /R:n      Wait "n" minutes for nodes to report MAINTENANCE mode.
    /R:F      Wait forever for nodes to report MAINTENANCE mode.
    /S:n      Wait "n" seconds before continuing.
    /T:hh:mm  Wait until "hh:mm" before continuing.

    /?     Display this help screen

    Errorlevels returnd are as follows:

    0 - Exit normal, all nodes cleared with /R, /S:n expired or /T reached.
    1 - Exit because of a keypress
    2 - Exit because /R:n time reached before nodes cleared (/R only).


  With the /R switch wcWAIT polls continuously to open the Wildcat!
  configuration files in EXCLUSIVE mode, which will only be successful
  after all nodes have either been taken down or are at the MAINTENANCE
  prompt.  It is designed to be used in a batch process to continue some
  activity after all nodes have come down.  For example, an event batch
  file might look like this:


     WCNODE /R /A                 ; take all nodes to maintenance mode
     WCWAIT /R:120                ; wait for them all to go down, or 2 hrs.
     IF ERRORLEVEL 2 GOTO SKIP    ; timeout exit with level 2, skips PACK
     IF ERRORLEVEL 1 GOTO STOP    ; keypressed exit with level 1, exits
     REM It's ok to pack now!     ; success exits with level 0
     WCPACK [pack options]
     :SKIP                        ; here if it didn't get clear to pack
     WCNODE /A /W                 ; starts them up again
     :STOP                        ; exits w/o starting up again on keypress

- Added a new program CNVUINFO.EXE used to convert the new USERREC.BIN
  to the v3 format of USERINFO.DAT.  This is a one-way conversion for
  doors that cannot use the new USERREC.BIN or DOOR.SYS.  If used, it
  should be located in your home directory where it was installed, and
  run from the node work directory where the user data file is located.
  Placing the command in the door batch file just before calling the
  door program will work just fine.

- Note that the DOORTEST program can only be used on serial ports 1-4,
  not digiboards, fossil or other com ports.
  
- Note that the TIMEOUT program can only be used on serial ports, not
  digiboards, fossil or other com ports.  It will accept any valid com
  port number.

- The DOORWAY program itself is only distributed with the MultiLine
  Platinum version of Wildcat!.  It will work with serial ports,
  DigiBoard ports or Fossil drivers.  It uses the same basic commands as
  the commercial release direct from the author, except that the port
  command line argument is disabled.  Our release of DOORWAY gets the
  port information from the DOOR.SYS file, and must also have one of the
  following command line arguments, depending on the TYPE of port being
  used:

    SYS  - for standard serial ports, i.e.,
           DOORWAY SYS [other command line arguments]

    SYSD - for DigiBoard ports, i.e.,
           DOORWAY SYSD [other command line arguments]
          
    SYSF - for fossil driven ports, i.e.,
           DOORWAY SYSF [other command line arguments]

    LOCAL- for local access, no serial port, i.e.,
           DOORWAY LOCAL [other command line arguments]

  See the manual for full documentation.

- Windows

  Microsoft Windows can be used as a multitasking environment for both
  serial port sessions and DigiBoard sessions. Windows does not
  multitask as well as DESQview from Quarterdeck Office Systems but can
  handle multiple sessions.  The number of lines that can be
  successfully run depends on the speed your PC hardware, memory, and
  connection speed.  Most 486/33 systems are capable of handling up to 4
  lines.  Beyond 4 lines system performance begins to deteriorate and
  become noticable to callers above 9600 baud, unless a faster CPU and
  other hardware are installed.

  The following settings within Windows are needed for either Serial or
  Digi configurations:

  BOTH SERIAL & DIGI

   CONTROL PANEL/386 Enhanced options - Set Device Contention to NEVER
   WARN, and Scheduling to 20 each for Forground and Background.  Set
   Minimum Timeslice to 22 on most systems.  The Minimum Timeslice can
   be lowered to 10 on faster systems such as 66 MHz models.

   For EACH NODE you must create a .PIF file.  Set the paths correctly
   for each file and configure the Advanced Options as follows.

     Under Multitasking Options for Forground Priority and Background
     Priority, set them equal at 20 each.  Do NOT select Detect Idle
     time!

     Under Memory Options only select Lock Application Memory.

     Under Display Options do not select any options.

     Under Other Options you can select Allow Fast Paste but should not
     select Allow Close When Active.  You do not need to reserve any
     shortcut keys.

     Do not set ANY Windows applications to EXCLUSIVE, even non-Wildcat!
     programs.

   The settings above are needed for all Windows operation.

  SERIAL (under Windows)

   Serial port sessions are limited to 2-4 per PC and require a very
   fast CPU to avoid slowdown of the communications sessions if multiple
   nodes are installed.  A 486/33 or faster is suggested. We strongly
   recommend using Windows v3.11 (Windows for Workgroups) because of the
   enhanced serial port drivers included with that version.  If you use
   version 3.1 you may need to replace the Windows communications
   drivers with an aftermarket product such as TurboCom or KingCom.

   Serial port operation can be enhanced by adjusting the FIFO trigger
   levels in MAKEWILD.

        Trigger level for receive FIFO buffer    : 4
        Trigger level for transmit FIFO buffer   : 1
  
   The TRANSMIT FIFO is especially important under Windows and should be
   tried initially at a value of 14 or 8 if Windows is being used.  If
   running under DESQview you may need to leave this set at 1. Depending
   on your hardware configuration this option can have a pronounced
   effect on performance.


  DIGIBOARD (under Windows)

   Digiboard includes a Windows driver with the newer PC/8e and PC/8i
   boards which should be installed according to the instructions.  The
   DigiBoard is capable of handling additional lines under Windows, but
   performance falls off between 4 and 6 lines, depending on the speed
   of the CPU and other hardware.

   If your machine already has serial ports installed you should set the
   START PORT NUMBER to the highest numer already in your system.  For
   example, if you already have both COM1 and COM2, set the starting
   Digi port to 2 (Digi assigns your serial COM1 as port 0 and your
   serial COM2 as port 1).  This is done to allow other communications
   programs to take advantage of all ports, both serial and Digi.

   Review the section in the Wildcat! manual for DigiBoard setup under
   DOS as the same precaustions about memory addresses and IRQ settings
   apply.

   The Port Setup screen is where you configure each line of a multiline
   system.  Under Windows the intelligent DigiBoard cards can be
   addressed through the internal Digi Int 14 interface (Wildcat! must
   be set to DIGI) or they can be set to be addressed as standard serial
   ports if each port is given a unique I/O address.  In fact, you can
   use a combination approach and have Wildcat! address the ports
   through the Digi interface and have all other doors, etc address
   ports as if they were standard serial ports.

   The PORT SETUP determines how the card is used:


   Digi      Windows         Virtual Base    Virtual    CHR   Alt
   Port       Port           I/O Address       IRQ     Ready  Pin
   ----      -------         ------------    -------   -----  ----
    1         COM3               3E8h           5        ON    OFF
    2         COM4               2E8h           5        ON    OFF
    3         COM5               3E0h           5        ON    OFF
    4         COM6               2E0h           5        ON    OFF
    5         COM7               disabled    disabled    ON    OFF
    6         COM8               disabled    disabled    ON    OFF
    7         COM9               disabled    disabled    ON    OFF


   The Windows Port column is only used by Windows applications to
   address the port.  QmodemPro for Windows will make use of this
   setting.

   The Virtual Base I/O Address column can be disabled if you are
   setting Wildcat! to use DigiBoard as the port type.  Serial Doors
   will not be able to talk to the port if this setting is disabled.  If
   you want to allow DOS programs to talk to the port as if it were a
   standard serial port you must enter an available I/O address for each
   port in this column.  The DigiBoard documentation contains a list of
   available I/O address ranges.  Likewise, the Virtual IRQ can be
   disabled unless you want to address the port as a standard serial
   device from DOS.  For standard port addressing you should enter the
   same IRQ used by the board for each channel (shared IRQs). We
   recommend that you set each port manually and do not use the Auto
   Enumerate option.

   The bottom section of the Port Setup screen is used to set the
   Virtual ports for DOS.  Check the box only if you want to enable the
   ports in DOS and want to set up the proper Virtual Base addresses and
   IRQs.


- OS/2

  SERIAL (under OS/2)

   In order to operate Wildcat! under OS/2 you must make use of
   replacement communications drivers.  Install the latest SIO drivers
   from Ray Gwinn, available for download from the MSI HQ BBS.  The
   standard OS/2 COMM drivers will not handle high-speed connections
   correctly.

   Edit your CONFIG.SYS file (OS/2 version) and make the following
   changes/additions.  Note that the last line is an undocumented
   setting and MUST be included:

     MAXWAIT=1                           ;the default is 4
     PRIORITY_DISK_IO=NO                 ;the default is YES
     PRIORITY=ABSOLUTE                   ;undocumented(!)


   Next, modify your DOS boxes options, found under Settings/Session  
   for the BBS as follows:

     DOS_BACKGROUND_EXECUTION=ON
     DOS_BREAK=ON
     DOS_FILES=30
     DOS_HIGH=ON
     EMS_HIGH_OS_MAP_REGION=32
     EMS_MEMORY_LIMIT=2048
     HW_ROM_TO_RAM=OFF
     HW_TIMER=ON
     IDLE_SECONDS=10
     IDLE_SENSITIVITY=75
     INT_DURING_IO=ON

   If you need to run a FOSSIL driver in a DOS box for other programs
   add the following (from SIO):

     DOS_DEVICE=C:\OS2\MSDOS\VX00.SYS

   Finally, edit the CAT.BAT file, or the batch used to start Wildcat! 4 and
   add the /T command after Wildcat in the batch file like this:

      WILDCAT /T

   This enables OS/2 time slicing code which makes running OS2SPEED or TAME
   unnecessary.



  DIGIBOARD (under OS/2)

   Although some PCs are capable or initializing the DOS DigiBoard driver
   multiple times under OS/2 (once in each DOS session), there are many
   hardware configurations that are not capable of doing so.  We do not
   recommend operating the DigiBoard under OS/2 until an OS/2 driver is
   made available that can be addressed from DOS sessions.


- X.25 PAD support

  Wildcat! 4 can be operated with a packet switched network using many
  packet assemblers/disassemblers (PADs). The configuration of each PAD
  is different depending on the manufacturer.  The Wildcat! manual
  contains information about the signaling needed for PAD operation and
  this section contains very specific product settings for installing
  the Microtronix CSI-X.25 PAD.  For additional information contact
  Microtronix at:
                        Microtronix
                        200 Aberdeen Drive
                        London, Ontario N5V 4N2
                        CANADA

                        519-659-9500 voice  8:30-5pm EST
                        519-659-8500 FAX

  What follows is some brief information related to the setup of the
  Microtronix CSI-X.25 PAD for operation with Wildcat!.

  For customer service and additional questions about setup contact
  Microtronix Customer Service at the number listed above, x225 or x226.

  Each port can be configured identically for the various port
  parameters.  Examples follow each command shown.

  PORT # 3

  PROTOCOL=USER, SPEED=9600, PARITY=ASIS, ENCODING=NRZ, DUPLEX=FULL

  FLOW=SIGNAL, MODEM=11, MTIMER=1, DEBOUNCE=10, STATUS=ENABLE


  In order for the asynchronous ports to pass data transparently, a
  default profile HOST is copied to the ports that will be used.

  HOST = 1:0    2:0    3:0    4:3    5:1    6:0   7:21    8:0   9:0

        10:0   12:1   13:0   14:0   15:0   16:127 17:24  18:18 19:1

        20:0   21:0   22:0   40:0   41:0   42:0   43:0   44:0  45:0

        46:0   47:0   48:0   49:0   50:0   51:0   52:0   53:0

  A second profile, created by the user, overlays the first to adjust
  for such things as signal flow control and idle timer.  It also sets
  the Microtronix extended parameters to issue commands on call connect
  and parameters that allow I/O transparent mode.

   MUSTANG  =   4:5    5:2   12:0   41:160   50:128


  The final parameters for the HOST ports should look like this:

   TERMINAL # 3

         1:0    2:0    3:0    4:5    5:2    6:0   7:21    8:0   9:0

        10:0   12:0   13:0   14:0   15:0   16:127 17:24  18:18 19:1

        20:0   21:0   22:0   40:0   41:160 42:0   43:0   44:0  45:0

        46:0   47:0   48:0   49:0   50:128 51:0   52:0   53:0

  A parameter change on the remote DTE is required when the call
  connects and is accomplished using a command to send a profile named
  X29.

   X29 =     2:0   3:2    4:4    9:0    13:0    21:0


   TERMINAL # 3

   RPROF=X29 AUTOCALL=  LFPAD=0    CRPAD=0    LDSP=18    LDEL=24  CDEL=127
   EDIT=OFF  WIDTH=0    TABS=OFF   ECHO=OFF   ECHOMASK=0 TYPE=TTY PUBLIC=OFF
   MBIT=OFF  PAGEWAIT=0 CTEXTEND=0 CTATEMPT=0 CTIMER=0   LINK=0   LOOPBACK=OFF


  All ports are configured and ready to accept all calls via the routing
  table.  One entry is entered at the end of the routing table.

   Name                 Match                   Route to
   ----                 -----                   --------

   RC                   Data=RC_PASSWORD        RC,CLEAR /reverse
   TO_NMC               Data=NMC                NMC /reverse/strip
   TO_202_217           In on port=0 data=2     1 /reverse/strip
   FROM_2               In on port=1            0 /reverse
   TERM_2               Data=02                 2 /reverse
   TERM_3               Data=03                 3 /reverse
   ...
   MUSTANG                                      2,3,4,5,6,7,8



