Filename:   README.TXT
Product:    NetWare(R) HostPrint(tm) 1.1 Update for NetWare for SAA* 2.0
Date:       February 1995

=============================================================================
CONTENTS
========

1.0  Introduction
   1.1 Critical Information
2.0  Installation Notes
3.0  Trademarks

=============================================================================
1.0  INTRODUCTION
=================

  The NetWare HostPrint Update for NetWare for SAA 2.0 is required for using
  NetWare HostPrint 1.1 with NetWare for SAA 2.0.  HostPrint 1.1 will not
  run on NetWare for SAA 2.0 without applying this update.

1.1 Critical Information
========================

  IF YOU ARE RUNNING NETWARE FOR SAA 1.3, you must install Netware HostPrint
     1.1 PRIOR TO installing NetWare for SAA 2.0.

  IF YOU HAVE INSTALLED NETWARE FOR SAA 2.0 DO NOT INSTALL NETWARE HOSTPRINT
  1.1.
     Installing NetWare HostPrint 1.1 after installing NetWare for SAA 2.0
     damages the NetWare for SAA configuration utility program files.  You
     will then be required to reinstall NetWare for SAA 2.0.

  IF YOU HAVE INSTALLED NETWARE FOR SAA 2.0 ON A SERVER THAT DOES NOT HAVE
  NETWARE HOSTPRINT INSTALLED.
     To perform a new installation of NetWare HostPrint after NetWare for
     SAA 2.0 has been installed (that is, a NetWare server on which NetWare
     HostPrint is NOT yet installed, but NetWare for SAA 2.0 is), install
     NetWare HostPrint 1.11.  In that case, this update does not apply, as
     NetWare HostPrint 1.11 supports NetWare for SAA 2.0.


=============================================================================
2.0 INSTALLATION NOTES
======================

  IMPORTANT NOTES:

  -This update is to be APPLIED ONLY after installing NetWare HostPrint 1.1
   and NetWare for SAA 2.0.

  -You DO NOT need to reinstall NetWare HostPrint 1.1 if it was already
   installed on NetWare for SAA v1.3 and you upgraded to NetWare for SAA 2.0.

  -If NetWare HostPrint 1.1 is NOT ALREADY INSTALLED, you must install NetWare
   HostPrint 1.11, in which case you do not need this update.

  -DO NOT ATTEMPT TO INSTALL NETWARE HOSTPRINT 1.1 AFTER NETWARE FOR SAA 2.0
   HAS BEEN INSTALLED.

  To install this NetWare HostPrint 1.1 update, do the following:
  ---------------------------------------------------

   1.  Verify that NetWare HostPrint, the Communication Executive, and the
       Communication Services Configuration utility (CSCON) are not running.

   2.  At the NetWare server console prompt ( : ), type
       LOAD INSTALL and press <Enter>.

   3.  Select "Product Options" from the Installation Options menu.

   4.  On a NetWare 4.1 server, select "Install a product not listed".
       On a NetWare 3.12 server, press "Insert".
       You are prompted to insert the NetWare HostPrint 1.1 Update diskette.

   5.  Insert the Netware HostPrint 1.1 Update Diskette into drive A:
       and press <ENTER>.

   6.  Select "Install on this server" from the confirmation menu.


=============================================================================
3.0 Trademarks
==============

 Novell, Inc. has attempted to supply trademark information about company
 names, products, and services mentioned in this README file.

 Novell, NetWare and NetWare HostPrint are trademarks of Novell, In

 SAA is a trademark of International Business Machines Corporation.

=============================================================================
 Copyright (c) 1992, 1993, 1995 Novell, Inc. All rights reserved.

** This concludes the README.TXT file for the NetWare HostPrint 1.1 update. **
