WordPerfect 5.1, 6.0
--------------------


WordPerfect 6.0
---------------
To use high resolution modes with WordPerfect 6.0, install the VESA driver 
that comes with WordPerfect and configure the program to use one of the VESA 
high resolution graphics modes.

WordPerfect 5.1
---------------
The high resolution WordPerfect version 5.1 driver supplied with your 
SpeedStar Alpine Series graphics accelerator supports both high resolution 
text and graphics.

WordPerfect allows graphics and text drivers to be set up separately,
so be sure to install both of these drivers.

Installing WordPerfect 5.1 display drivers
------------------------------------------

TEXT DRIVER
___________

To install the WordPerfect high resolution text driver follow these 
instructions:

 If you have not already done so, install WordPerfect onto your computer
 system. Follow the instructions supplied with WordPerfect.

 Run the SpeedStar Alpine Series installation program (GO.EXE), and choose
 the option for the WordPerfect drivers and specify the drive and directory
 where you want them copied to (such as C:\WP51).

 Start WordPerfect, and go into SETUP by typing [Shift-F1].

 Choose Display [2], then text screen type by pressing [3].

 Move the cursor to where GD543X appears on the list, and choose SELECT.

 A sub-menu will appear, listing all the choices of resolutions supported by
 the SpeedStar text driver. Select the desired resolution.

GRAPHICS DRIVER
_______________

To install the WordPerfect high resolution graphics driver supplied with your 
SpeedStar graphics accelerator, follow these instructions:

 If you have not already done so, install WordPerfect onto your computer 
 system. Follow the instructions supplied with WordPerfect.

 Run the SpeedStar Alpine Series installation program (GO.EXE), and choose the
 option for the WordPerfect drivers and specify the drive and directory where
 you want them copied to (such as C:\WP51).

 Start WordPerfect, and go into SETUP by typing [Shift-F1].

 Choose Display [2], then graphics screen type by pressing [2].

 Move the cursor to where CIRRUS LOGIC appears on the list, and choose SELECT.

 A sub-menu will appear, listing all the choices of resolutions supported
 by the SpeedStar graphics driver. Select the desired resolution.
