Lotus 123 v3.x
--------------

To install a Lotus 3.0 or 3.1 display driver, proceed as follows:

It is assumed that Lotus 1-2-3 v3.0 or v3.1 is already installed on your 
hard disk, using the standard Lotus installation utility. To install 
this driver, make the directory containing 1-2-3 v3.0 the current 
directory. For example, if 1-2-3 is in the directory named 123R3, then 
type the following command:

CD \123R3 [Enter]

One of the files used in the driver installation is named INSTALL.DDF. 
This is a text file used by the 1-2-3 installation utility, containing 
information on each of the drivers and modes of operation. If you have been 
using a driver supplied with another graphics adapter, you may want to make
a backup copy of the INSTALL.DDF file currently in your 1-2-3 directory.

COPY INSTALL.DDF INSTALL.BAK [Enter]

Run the SpeedStar Alpine Series installation program ( GO.EXE ), and choose 
the option for the version of Lotus 123 that you are using.  Next, specify 
the drive and directory of your Lotus 123 3.X sub-directory, i.e. C:\123R3.

If the INSTALL.DDF has been copied to a backup fille (see step 2 above),
answer YES to the prompt to confirm overwriting the file.

Now run the Lotus installation utility by typing:

INSTALL [Enter]

Select Change selected equipment from the list. Note: If you are currently 
using another driver supplied with a graphics board, it may be necessary to 
choose First-time installation. Select Modify Current DCF, or Choose Another 
DCF to modify, according to your preference.

The following procedure is valid for either selection
-----------------------------------------------------

Select Change Video Display. This will present you with a list of all the
display types provided with the 1-2-3 distribution, with two additional
choices.

GD543x 100 Column Display (800x600 resolution) supports 100x31, 100x42,
and 100x75 16 color modes. GD543X 128 Column Display (1024x768 resolution)
supports 128x40, 128x54, and 128x96 16 color modes.

Select a resolution that best meets your requirements.

After your selection is made, choose the Save Changes option from the menu.

Note that when some high-resolution modes are selected, a message may appear
asking for the drive letter of the floppy disk.

Before entering the drive letter, insert the disk that is requested in the
floppy drive.

After inserting the disk, you may enter the drive letter containing that
diskette.

