0 HP DeskJet 540 Installation for DOS
1 ~S~tart Installation
2 ~E~xplain
3 E~x~it
4 ~C~ancel
5 ~I~nstall Control Panel
6 ~O~K
7 ~M~odify
8 Do ~N~ot Modify
9
10 ~R~eboot
11 ~W~hat to do...
12 ~I~gnore
13 ~T~ry again
14
15 VERSION=Version 1.0                                         
16 README2.TXT
17 ENGLISH
18 REM Add directory containing HP DeskJet printer software to path\n
19
20 Welcome to the HP DeskJet 540 Printer Installation for DOS.  This installation program will help you learn about the printer software that will be installed and perform the software installation.
21 You can exit the installation at any time by pressing the "Exit" button.
22
23
24
25 The HP DeskJet Installation program has identified the following printer and port connection:
26 The HP DeskJet Installation program will be installing software for the:
27 LPT1 (Parallel Port 1)
28 LPT2 (Parallel Port 2)
29 LPT3 (Parallel Port 3)
30 If you would like to select a different port, please make a new selection below.
31 ~P~ort:
32 HP DeskJet 540 on LPT
33
34
35 The HP DeskJet Installation program is about to install the HP DeskJet 540 Control Panel for DOS.
36 The HP DeskJet 540 Control Panel for DOS is a software program that allows you to:
37 * Clean the print cartridge.
38 * Solve a printer problem.
39 * Select default print settings that are not available through specific DOS programs.
40 The HP DeskJet Installation program is installing the HP DeskJet 540 Control Panel for DOS.
41 The HP DeskJet 540 Control Panel for DOS has been installed.  To use the Control Panel, type DJCP at the DOS prompt.  e.g. [C:\\>].
41
42
43
44
45 The HP DeskJet Installation program will modify the system file AUTOEXEC.BAT now.  Your current system file will be saved as AUTOEXEC.HP.
46 This will allow the HP DeskJet 540 Control Panel for DOS to be run from any DOS directory.
47 If you choose not to modify your system file you will need to go to the C:\\DESKJET directory and type DJCP to run the Control Panel.
48 The HP DeskJet Installation program is saving and modifying the system file AUTOEXEC.BAT.
49 The system file AUTOEXEC.BAT has been modified and saved.
50
51
52
53
54
55 * The HP DeskJet 540 Control Panel for DOS has been installed.
56 * The system file AUTOEXEC.BAT has been modified and saved as AUTOEXEC.HP.
57 More information on using your printer is available in the User's Guide.
58
59
60 Installation of the HP DeskJet 540 printer software for DOS was successful.
61 If you use Microsoft Windows programs, be sure to perform the printer software installation for Windows.
62 In order to access the HP DeskJet 540 Control Panel for DOS from any directory, you must reboot your computer.  To reboot, remove the "Installation Disk 2" from your floppy drive and press the Reboot button now.
63 In order to access the HP DeskJet 540 Control Panel for DOS from any directory, you must reboot your computer.  To reboot, first exit Windows. Then remove the "Installation Disk 2" from your floppy drive and press CTRL-ALT-DEL.
64
65 The HP DeskJet 540 software installation is incomplete.
66 To complete the software installation you will need to run the HP DeskJet Installation program again.
67 To return to the HP DeskJet Installation program press the Cancel button.
68
69
70 There is not enough room on your hard drive for software installation.  You will need to remove some files from your hard drive to perform the software installation.
71 There is not enough memory to run the HP DeskJet 540 Installation for DOS program.  See your DOS manual for instructions on how to free additional system memory.
72 An error occurred while copying the HP DeskJet 540 Control Panel for DOS.  Try running the HP DeskJet Installation program again.  If that doesn't work, call the HP Customer Support Center.
73 An error occurred while modifying the system file AUTOEXEC.BAT.  Restore your system file by renaming AUTOEXEC.HP to AUTOEXEC.BAT.
74 The HP DeskJet Installation program was unable to modify your system file AUTOEXEC.BAT.
75 To run the Control Panel you will need to go to the C:\\DESKJET directory and type DJCP.
76
77
78
79
80 Select the port to which you connected your printer when you set it up.  LPT ports are parallel ports.
81 If no other printers are installed on your system, you will probably want to select LPT1.
82
83
84
85 ATTENTION
86 An HP DeskJet 540 printer cannot be identified on any of your computer's parallel ports.
87 It is recommended that you first set up your printer according to the First Time Setup instructions in the user's guide.
88 If you are not sure why you are seeing this message, press the "What to do..." button below.
89 If you would like to install the printer software even though an HP DeskJet 540 could not be found, press the "Ignore" button below.
90
91
92
93
94
95 First, check these things:
96 *  The printer is turned on (lower button light on front of printer is lit).
97 *  The printer has been correctly set up and connected to the computer (refer to the user's guide).
98 *  The printer can successfully print a test page (refer to the user's guide).
99 If you have done these three things, there may be a faulty connection between your printer and your computer (refer to the user's guide).
100 Press the "Try again" button to check your connection again and continue the installation.
