          WordPerfect (R) FaxDirect (TM) for Artisoft Exchange (TM)
                   Information Update File (README.TXT)
          ---------------------------------------------------------
                    (C) Copyright 1994 Artisoft, Inc.
                              (Edition 1.0)


   Using the Fax Gateway or the Fax Printer Driver with Windows
   ============================================================
       To send and receive faxes through Microsoft Windows, you must
       install two special drivers. These drivers are located on your
       WordPerfect FaxDirect for Artisoft Exchange installation disk.

   Installing the Device Drivers
   =============================
         1. At the DOS prompt (NOT a DOS box in Windows), change to your
            Windows directory. For example, type

              C:
              CD WINDOWS

         2. Copy the device drivers from the installation disk to the
            Windows SYSTEM directory. To do this type

              COPY A:\EXPCOMM.DRV C:\WINDOWS\SYSTEM\EXPCOMM.DRV
              COPY A:\EXPVCD.386 C:\WINDOWS\SYSTEM\EXPVCD.386

            Where A: is the drive containing the installation disk, and
            C:\WINDOWS is the path to the Windows installation directory.

         3. Using a text editor such as DOS EDIT or Windows Notepad, edit
            your SYSTEM.INI file (in your Windows directory) and add the
            following lines.

            - In the [386Enh] section add the line:

                  TimerCriticalSection=500

              and replace the line DEVICE=*VCD with

                  DEVICE=EXPVCD.386

              (Add the above line to the [386Enh] section if it doesn't
              exist.)

       Note: If you experience lockup problems during operation of the Fax
             Gateway or fax printer driver, increase the
             TimerCriticalSection setting to 1000.

            - Replace the line that begins "COMM.DRV" (or add it to the
              [boot] section if it doesn't exist) with the following:

                  COMM.DRV=EXPCOMM.DRV

         4. Save the SYSTEM.INI file.

       You're now ready to use the Fax Gateways and fax printer driver in
       Windows.
