Computer Support Corporation appreciates your support of the Arts & Letters
Apprentice and our other fine graphics products.  We are proud of our
products and will make every effort to ensure your satisfaction.

If you have not already done so, please protect your investment by returning
your registration card today!  We'll keep you updated with information about
product upgrades, new CSC programs, and customer services.

*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *

TEXT ALONG A PATH

Included with Apprentice is a custom clip-art library of different
freeform paths. These paths are provided for binding text using the
Bind to Shape command in the Manipulate menu. In addition, you can
bind text to any path you draw with the line and curve tools. See
the User's Guide for more information on binding text to a path.

*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *

DISKETTE MEDIA

If you have received 5 1/4 inch diskettes and require 3 1/2 inch diskettes,
please return the 5 1/4 inch diskettes with your registration card to the
address below for replacement.

In the U.S., contact:   Computer Support Corporation
                        15926 Midway Road
                        Dallas, Texas 75244

Users outside the U.S. please contact your local distributor.

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

MICROFIELD GRAPHICS BOARD 

If you are using the Microfield graphics board in 1280 X 1024 mode
you may encounter a problem with the handles on objects.  Objects may appear 
to be selected when they are not and vice versa.  To correct this problem,
add a line to the WIN.INI file (which is located in the directory that
contains your copy of Microsoft Windows).  After you have installed 
Arts & Letters add the following line in the [a&L] section: "Handles=1". 
Save the WIN.INI file then restart Windows for the changes to take effect. 

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

DOCUMENTATION UPDATE

Autoloading Clip-Art Libraries. Appendix B, "Advanced Windows Techniques,"
includes a section on Selecting Custom Libraries. The WIN.INI line
"custom libraries=number" should be "apprentice libraries=number."

Toolbox Highlight.  If you wish to turn off the white highlight on the
tools in the toolbox you can add the following line in the [a&l] section
of the WIN.INI file: "Tool emboss=0".  Save the WIN.INI file then restart
Windows for the change to take effect.

Hardware and Software fonts.  The Windows WIN.INI file contains separate
parameters for each printer and each printer port installed. For example,
if you have a PostScript printer configured for output to LPT1 and COM2,
your WIN.INI file will contain a [PostScript, LPT1] and a [PostScript,
COM2] section.  In order to print a document that contains hardware or
software fonts, the fonts must be installed in the section corresponding
to the currently selected printer and port.  If you use the Arts & Letters
"To File" command to print to a file, the fonts must be installed in the
section corresponding to the selected printer on the port FILENAME. A
convenient method of installing fonts to various printer/port combinations
is to install the fonts once, then load the WIN.INI file into Notepad and
Copy and Paste the font information to all of the desired sections.

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

TECHNICAL SUPPORT

If you have any questions or suggestions, please see the introduction to
the User's Guide for information about our Free Technical Support Services.

