
    HOW TO INSTALL THE REMOTE OFFICE CLIENT WITH NETWARE LITE
    -----------------------------------------------------------

  The batch file named "ROSTART.BAT" illustrates how to run the Remote
  office client with Novell's Netware product.

  Netware Lite uses the ODI interface into Remote Office.  This
  interface may require modification to the net.cfg file located in
  the Remote Office directory.  By default, it will look similar to
  the following:

      Link Driver ODIROF-E
         frame ETHERNET_802.2              {driver #1}
      ;   frame ETHERNET_802.3             {driver #2}
      ;   frame ETHERNET_II                {driver #3}
      Protocol IPX
         bind #1

  The Remote Office install procedure creates a file called ROSTART.BAT
  in the Remote Office directory.  This BAT file may be used to load the
  Remote Office host.  If you wish, the modules loading in Rostart.bat
  can be folded into another BAT file.  The load sequence is as follows:

  roffice
  lsl
  odirof-e
  ipxodi
  ro {login} {host}
  server
  client

  The Remote Office login can take place at anytime.  We insert it
  here merely to point out that it is a step that must be performed.

  NET.CFG Parameters

  Broadcast Timeout:  The time that the NetWare Lite client should
  wait for a response to broadcasts.  This parameter appears to be
  based in fifth's of a second with a default value of 5.  Because
  of the slower link speed of the asynchronous communications link,
  this value should be raised to a value of 20.  The default value
  will cause intermittent problems in making connections through the
  NetWare Lite interactive utilities.

