This is a set of patch disks which automatically revise the
current installed version of AutoCAD R12 to the R12 c3 level.
Your AutoCAD serial number, personalization information, and
authorization codes will remain the same. Please make sure to
retain your original AutoCAD disk set. You should not have
destroyed any media or returned disks to your dealer.

Prior to Installing:
Before installing the patch be sure to back up any files that
you may have customized (for example, acad.mnu, acad.pgp,
etc.). The patch program requires approximately 5.5 MB  of
free disk space to run.

Installation Instructions:
Assuming you have installed your AutoCAD on drive C: and your
floppy drive is drive A: you need to do the following:

     For Windows:
     1) From the Dos Prompt, type:
        c: <cr>
        cd \acadwin (or directory where AutoCAD 12 is
                     installed)

     2) Place disk 1 in drive A: and type:
        a:\install a: <cr>
        follow the instructions on the screen

     For DOS:
     1) From the DOS Prompt, type:
        c: <cr>
        cd \acadr12 (or directory where AutoCAD 12 is
                     installed)
     2) Place disk 1 in drive A: and type:
        a:\install a: <cr>
        follow instructions on the screen

Please refer to the electronic readme file for last minute
changes.
