 H H  6:av2}"=Ql+					d






\j#.LSZ
x

9S]Q              J X e r       	/)7Pj3F[pInvalid entry Invalid date Invalid time Invalid point address Point does not exist Point must be on connected link Point must be resident Invalid point type DOS error xxxxx No reply from tap No reply LRC error Response error xxx Address  Type Class Name              C EV RT CN AI TS TC TR xx xx
--------+----+-----+----------------+--+--+--+--+--+--+--+--+--+--
 DC  OBEMDC  DCUCDC          DC  LC  DC  No entries in selected data base Press any key to continue Entry not found  Retry Abort   Add Delete Modify Copy  Enter/select point name:  Enter/select source point name:  Extension aleady exists Extension does not exist No more entries can be added  Add Delete Modify   Add Delete  Delete?  No Yes   Add Delete Modify Copy History Tuning  Please stand by... Entry already exists Press ESCape to exit Communications error Dialing '%s', press ESC to abort DCU savefile not current.  Perform save?  Yes No  Less than 256 bytes remaining in DCU      @WkHd;@EJO]k}#2?QZi{
$-6@IS`lv(9JUdq~Index page  	Control Systems International, Inc.,  CSI I/NET 7700  Rev. 2.11 (c) Copyright CSI, Inc., 1990,1991,1992,1993 
All rights reserved  Host tap not connected 
      
 
  
 Enter value (%d to %d):  Enter up to %d characters:  Enter point address or name:  Enter date (mm/dd/yy):  Enter time (hh:mm:ss):  Enter value:  Select ( Enter date (mm/dd):  Enter time (hh:mm):  Enter value (%f to %f):  Sun Mon Tue Wed Thu Fri Sat -- DI DA DM DC DO AI AO GI GO PI Ext Int Ind N Y Local host Resident driver not loaded
 Incompatible driver loaded
 Can't read %s Host Link Tap DCU Point F1=Help  F2=Silence  F3=Recall  2Page Up/Down=Continue   AITM?*MSG**ALM**PRN*State change Status alarm High limit alarm Low limit alarm 
Return to normal Demand exception Runtime reset %Alarm ack Test off Test on Manual off Manual on EAction message ATS control Demand control Event control HHC control Override control Control Command error Override control Power restored Host reconfigure Link reconfigure LAN reconfigure Upload data lost Sample data lost Station lost Station restored UC lost UC restored Test off Test on Sign on Sign off Sign on Sign off DCU alm ack UC alm ack Set date Set time ATS start ATS stop ATC start ATC stop DMD start DMD stop Online 90% full Online 95% full Online data lost Special day lost Time-sync failed DCU-save failed ATS-mstr failed Auto DIF failed Host lost Host restored Acknowledge DCU SW lost LAN tap SW lost Link tap SW lost Host tap SW lost                 Oxw&/9B\v"9Jd}1Rr>a8G`o|I/NET 7700  # Description
--+------------------------------------------  Enter/select item number:  REBOOT computer?  Yes No  F1=Help  F3=Recall  2Page Up/Down=Continue   Unable to open driver configuration file Program not found/unable to execute Unable to create batch file File not found  Press any key to continue Press Esc to abort; any other key to continue S7000DRV /r
DEL %s\MSGS*
BACKUP %s A: /s
Echo I/NET BACKUP successfully complete
Pause
S7000DRV
 S7000DRV /r
RESTORE A: %c: /s
Echo I/NET RESTORE successfully complete
Pause
S7000DRV
 S7000DRV /r
BLDONLN /D:%s %s
S7000DRV
 ROOTDIR= DATADIR= MSGDIR= SAVDIR= RWDIR= ARCHDIR= SETUPDIR= TEMPDIR= Enter number of sectors:  Enter number of records:  Parameter                               Input
------------+--------------------------------  Copy type  Source Destination Number/name Page Symbol Report  Page conversion Enter/select page no:  Page not defined Unable to open page files Error reading page files Error writing page files  Points Lines Modules  Page Name ----+-------------------------- Address ------------  Edit All_Links All_Stations All_Points  Save updated page?  No Yes  Enter point address (LLSSPPBB):  Enter link and station (LLSS):  Enter link number to change:  Enter station number to change:  Enter point address to change:  Enter new link number:  Enter new station number:  Enter new point address:  Page contains no points to edit Page contains no DDC lines to edit Page contains no DDC modules to edit Run I/NET 7700 Backup Restore Setup Create/expand Docutrend file Create/expand Messages file Record copy (RCOPY) File extract File insert Graphic page point conversion LAN exerciser Display README.DOC file Reboot system  Exit to DOS  S7000.EXE S7BACKUP.BAT S7RESTOR.BAT SETUP.EXE BLDONLN5.BAT BLDEVNT5.EXE RCOPY.EXE S7FEXT.EXE S7FINS.EXE  LANEX.EXE README.DOC                  	%A #,AKPU]iqzUp'AL]r +=FTeth							

%
,
2
;
@
	
Enter/select point address:    Select highlighted point Not connected Insufficient password level Inactivity timeout Address     Name              Row  Col      Value Inh Tst Man Old Ack
-----------+----------------+----+----+----------+---+---+---+---+---  Page Name ----+-------------------------- Point                     Status
----------------+-------------------------- State/value Old data Alarm 	Unacknowledged 
Inhibited Test mode Manual mode  Address     Name                  Value Inh Tst Man Old Ack
-----------+----------------+----------+---+---+---+---+---   Connect Disconnect Edit Messages Alarms Page Summary Docutrend Quit  Enter/select page number:  Enter page number:  Select highlighted page  Connect Disconnect Edit Messages Alarms Page Summary Docutrend Point Zoom   Page DCU Offnormal Disabled Configuration   Report_generation DIF_conversion   Escape   Retry Abort Ignore  Station:  Page Edit Control Acknowledge Test_on Test_off Manual Automatic Enter value:  Enter state:   Edit Messages Alarms Point Zoom  Edit in progress File read error Enter/select editor number:  Point            Editor
----------------+-----------------------------------  Add point to DCU?  No Yes  Add extension to point?  No Yes  Add module to DCU?  No Yes  Access denied No editors available Point does not exist Extension does not exit Module does not exist Invalid module type -/Direct digital control ./History ./Manual tuning ./Input/output plot Resident I/O Station parameters  Calculations Event definition Event sequences  Action messages !$Automatic time scheduling #&Automatic temperature control !Runtime $'Demand control (-Trend ).Trend plot  #Alarm inhibit "Consumption %(Override billing *)Unitary control 16Lighting control  Review events Parameter                        Value
---------------------+----------------  Start date
Time range - start
Time range - end
Address range - start
Address range - end  Message type        Message type        Message type        Message type
----------------+-  ----------------+-  ----------------+-  ----------------+-  Date     Time  Address     Site Name             Event type                Value--------+-----+-----------+----+----------------+----------------+--------------   Escape  Y -  DCU Host Messages file changed, restarting from beginning  Select All_Yes All_No  Alarm summary  Acknowledge Purge  Normal Alarm Restored Lost Date     Time  Address     Name             Status           Page
--------+-----+-----------+----------------+----------------+----   Acknowledge               JTw	E\x 1TDcGinsx~	ZwNy	
#(-27<AFKLMNOPQan{+C[q{&<Rlz
/;T`y'@Zq*Fb|#@[Edit menu Enter/select edit program number:  Not connected Host passwords - editor access - auto connect - DCU passwords No entries in network configuration Invalid response Invalid password Attempt to remove last password with password editor access Initials already exist Operator name already exist Password already exist Link Operator name                  Init ------------------------------+---- ---- St Site Type Name             Auto St Site Type Name             Lvl2 Lvl3 Lvl4 --+----+----+----------------+---- --+----+----+----------------+----+----+---- Link Type            Name
----+---------------+----------------  %s %s                   Host Passowrds                         Page %%d


 Printing (press ESCape to cancel), please stand by...  Host_passwords DCU_passwords   Add Delete Modify Copy Print  Enter new initials:  Enter new operator name:  Enter new password:  Enter/select operator name:  Enter/select source name:  Enter link address:   DCU_selection All_none All_lvl2 All_lvl3 All_lvl4   Access_selection All_yes All_no  None Lvl2 Lvl3 Lvl4  N/A Data base print **** DCU save file error **** Sta Link St Site Type Name             Print --+----+----+----------------+----- Link Type            Name             Print
----+---------------+----------------+-----  Data base parameter    Print ----------------------+----- %s %s  %%-22s  Sta %02d%02d Saved %s %s  Page %%d


 Point data base code definitions

Addr         Point address
(__)         Point type
E/I/@        External/internal/indirect
0/1/2/3      Local/LAN/Link/System
Scan         Scan interval
Message      Message priority and message masks
N/P/C        Normal/priority/critical msg priority
Cell         Cell priority and Cell number
Exten        Point extensions
C------      Calculation
-E-----      Event
--R----      Runtime
--C----      Consumption
--I----      Alarm inhibit
---A---      Automatic time scheduling
----T--      Automatic temperature control
-----D-      Demand
-----O-      Override
-----U-      Unitary control
-----L-      Lighting control
------T      Trend
State        State description
# bits       Number of bits
Control      Control description
Momentary    Momentary DC/DO output duration
Normal       Normal state
Delay        Alarm delay
Expect       Expected state
Min-T        Minimum trip
Min-C        Minimum close
TTS          Time to state
Monitor      Monitor point address
Equ          Conversion equation
M            Slope
B            Y-intercept
EU           Engineering units
CC           Conversion coefficients
Ofst         Offset
Sensor-l     Low sensor limit
Alarm-l      Low alarm limit
Alarm-h      High alarm limit
Sensor-h     High sensor limit
Output-l     Low output limit
Output-h     High output limit
BCC          Broadcase change counts
Accum type   Accumulator type
BScan        Scans between broadcasts
LT           Non-linear lookup table
Pri          Demand load priority
Size         Demand load size
On           Demand load on state
Max off      Demand load maximum shed time
Tgt          ATC target temperature
Dif          ATC differential
O            ATC demand/temperature override
Mode         Trend sample mode (none/time/point
Intrvl       Trend sample interval
C Samp       Trend cell sample count Printing (press ESCape to cancel), please stand by...  Parameter_selection DCU_selection Print    DCU_selection All_yes All_no    DCU_selection All_yes All_no Site_yes Site_no    Parameter_selection All_yes All_no   Enter Site address:  Yes No  No Yes  N/A 7700 7750 7730 7760 7720 7770 7810 7716 7780 7718       7801_Hst/Lnk/Ln 7801_Hst/Lnk 7804_Hst/Lnk 7802_Lnk/Ln 7802_Lnk 7805_Lnk --+----------------------    Command line function Messages  Alarms  Page  Page Summary  DCU Summary  Offnormal Summary  Disabled Summary  Configuration Summary  Docutrend Report gen.  Docutrend DIF conv.  Control  Test_on 	 Test_off 
 Manual  Automatic  Acknowledge 
 Quit   # Host computer Configuration   Passwords  System pages  Library symbols  Cell inquiry/edit  Report definition  Report generation  Network configuration  Trend log  Docutrend to DIF 
 	Message routing  
Graphics page print  1Offline data base edit  2Host ATS - 3Phone numbers  Software restore 0 7 # Host tap Configuration/status   # Link tap Configuration/status   # Site tap Configuration/status  Tap save  Tap restore   # DCU Configuration/status @Station save  Station restore  Station software save 5 Dynamic data upload  Passwords @Station parameters Resident I/O points Calculations (C) Event definition (EV) Event sequences Action messages  Runtime (RT) !Consumption (CN) "Alarm inhibit (AI)  #Time scheduling (TS) !$Special days "%Temperature ctrl (TC) #&Lighting control (LC) 1 6Demand control (DC) $'Override billing (OB) % (Unitary control (UC) * )UC configuration & *@Input configuration & + UC to UC copy ' ,@Trend sampling (TR) (-Trend plot ). Direct digital control ,/MODBUS configuration /  4@        7Nt5P 	Control Systems International, Inc.,  CSI I/NET 7700  Rev. 2.00 Backup (c) Copyright CSI, Inc., 1989,1990,1991,1992,1993 
All rights reserved *** Press any key to quit ***  Syntax: BUINIT [work station #]
 Initializing host %02d [%s]
 Syntax: BURESTORE [backup station #]
 Restoring from backup
 Copying file(s)!  Please stand by...
 File(s) copied
 Incorrect driver version
 Invalid host number
 Specified host must be online
 Unable to establish connection with host
 Unable to create local file
 Unable to open remote file
 Error reading remote file
 Error writing local file
           ;a$,C:DQXhx*Gby'<Xh*Jc%>Vk$1KCommunications error summary Communications errors for   Display_errors Initiate_session_traffic Quit   Escape  Enter/select host number:  Host Name             Messages Errors ----+----------------+--------+------ Target           Command                        Response
----------------+------------------------------+------------------------------  Sectors transferred Host %d Not a LAN based system  
F2=      scrolling F1=Help  2Page Up/Down=Continue   Start  Stop Broadcast Unknown command Call Listen Hang up Send Recieve Recieve any Chain send  Send datagram !Recieve datagram "Send broadcast datagram #Recieve broadcast datagram 0Add name 1Delete name 2Reset 3Adapter status 4Session status 5Cancel 6Add group name pUnlink qSend No-Ack rChain send No-Ack Unknown response  Successful Invalid buffer length Invalid command Command timeout Incomplete receive message Local No-Ack command failed Invalid local session no. 	No resource available 
Session has been closed Command was canceled 
Duplicate name in table NetBIOS name table full Name has active sessions NetBIOS session table full Session open rejected Illegal name number Cannot find name/no answer Name not found Name in use by remote Name deleted Session ended abnormally Name conflict detected Incompatible remote device !Driver response timeout "Driver command timeout #Invalid number in NcbLanaNum $Command completed while cancel %Reserved name specified &Command not valid to cancel 0Name defined by another proc. 4NetBIOS enviro. not defined 5Required OS resources 6Maximum apps. exceeded 7No SAPs available 8Resources not available @System error AHot carrier from remote BHot carrier from local CNo carrier detected NStatus bits more than 1 min. OStatus bits 8-11 on PAdapter malfunction Error - DIR.Initialize Error - DIR.Open.Adapter LAN program internal error Adapter check NetBIOS not loaded Open failed Unexpected adapter close Command-pending       , > System configuration Single Double  - Timed Constant  Messages                                Software status
------------------------+--------       ---------------------------------


Docutrend
------------------------+--------


Printer                                 Monitor
------------------------+--------       ------------------------+--------



Daylight savings   Month Week Day
------------------+-----+----+---  Message mask 
 Cell mask  Printer mask  Line spacing  Begin  End (Revision no. E2.11 (Revision date B8/30/93 (Refresh interval (sec) (3rd party icon (Operator timeout (min) (Normal alarm audible (Priority alarm audible (Critical alarm audible (Audible duration (sec)      	
] 	7m"=Xq~%U(DWdz 'N$CHNVZ^eku	$	@	f	z					

2
3
N
o






 +<Qaw
%3DSgzSystem pages Library symbols Parameter                                          Value
-------------------------+------------------------------  Page number
Page name
Edit grid
Backdrop (PCX)
Vertical backdrop offset  Parameter              Value
-----------+----------------  Edit grid   Library Graphic Text Page Point Extension Line Module Move Delete Redraw Zoom   Graphic Text Move Delete Redraw  Save?  Yes No Continue  Remote data not available  Black Blue Green Cyan Red Magenta Brown Light Grey Dark Grey Light Blue Light Green Light Cyan Light Red Light Magenta Yellow White   	Line color 
Display line value Display line ICON Total digits 
Fractional digits Justification  Left Right  Continue line?  Yes No  Adjust size Adjust position Adjust ICON position Adjust name position Adjust value position Enter DCU address (LLSS):  Enter/select symbol name:  Enter new library name:  Invalid name Library symbol(s) too complex Name ----------------  Line Box Circle Arc Fill Options Undo   	Graphic color Hatch style  Solid Dithered Box Slant_left Slant_right  Adjust opening angle using cursor position keys Adjust closing angle using cursor position keys  Standard Graphic Options  Enter standard text Enter graphic text  	Foreground color Background color 
Text height  Single Double  Move symbols Invalid action Highlight handles?  No Yes  Continue?  No Yes   Add Modify  Enter point address:  Select highlighted point  	Total digits 
Fractional digits Justification Display state/value   ASCII Graphic ICON ICON_Options  Enter/select symbol name for state 0:  Enter/select symbol name for state 1:   Decimal Dec_Options Vert_Bar Horz_Bar Bar_Options ICON ICON_Options   	Foreground color 
Background color Border color Minimum value 
Maximum value  Must select a point ICON No more extensions can be added Adjust extension ICON position Calc Event Runtime ATS ATC Demand Trend Alarm_Inh Consumption Override UC Lighting_Ctrl Enter/select page number:  Enter new page number:  Page Name ----+--------------------------  Page ICON Options   	Display page number  Adjust page number position  Line Line_Options ICON ICON_Options  Enter line number:  Select next end point Enter/select module number:  Enter module number:   2_Pos PID Float Reset HiLo R-STD R-DBM R-DBB R-IT  Home page?  Yes No  Homepage: Enter/select editor number:   Add point to DCU?  No Yes  Add extension to point?  No Yes  Add module to DCU?  No Yes  Access denied No editors available Point does not exist Extension does not exist Module does not exist Invalid module type -/Direct digital control ./History ./Manual tuning ./Input/output plot Resident I/O Station parameters  Calculations Event definition Event sequences  Action messages !$Automatic time scheduling #&Automatic temperature control !Runtime $'Demand control (-Trend ).Trend plot  #Alarm inhibit "Consumption %(Override billing *)Unitary control 16Lighting control                Ib} _	|6)De	[		e	Cell inquiry/edit Cell directory Cell data Archive Archive data D_sample A_sample Runtime Consumption Demand Override Event  TMS  Parameter                    Value
------------------------+----------------  Cell name
Cell type
Transient duration(days)  Parameter                    Value
-----------------+----------------  Date
Time  State Value Point address
Runtime (min)  Point address
Consumption  Point address
Consumption
Peak demand
Peak time  Point address
Nonbillable
 Time (min)
 Shared energy
 Exclusive energy
Billable
 Time (min)
 Shared energy
 Exclusive energy Point address
Event type
State/value  Point address
Process flag
Peak time
Peak demand
On peak-actual
Off peak-actual
On peak-estimated
Off peak-estimated  Cell Name             Type ----+----------------+----------- Line Filename Latest date Latest time ----+--------+-----------+----------- Line Date     Time  State
----+--------+-----+-----  Line Date     Time       Value
----+--------+-----+----------  Line Date     Time  Address     Runtime
----+--------+-----+-----------+-------  Line Date     Time  Address     Consumption
----+--------+-----+-----------+-----------  Line Date     Time  Address     Consumption   Peak  Time
----+--------+-----+-----------+-----------+------+-----  Line Date     Time  Address     Time(NB/B)    Shared(NB/B)    Exclusive(NB/B)
----+--------+-----+-----------+----------+-----------------+-----------------  Line Date     Time  Address     Event type       State/value
----+--------+-----+-----------+----------------+-----------  Line Date     Time  Address     Flg Peak time Peak demand    On peak   Off peak
----+--------+-----+-----------+---+---------+-----------+----------+----------  Parameter         Value
-------------+---------  Earliest date
Earliest time  Cell: Archive Online Normal Estimated Disabled  Nrm Dis Est   Cell_directory Cell_data Archive_directory Archive_data   Escape   Delete  Enter/select cell number:  Enter/select line number:   Archive_cell Archive_all_cells   Current_archive New_archive   Delete Modify  Enter cell number:  Install archive  ; press Return/Enter to continue, Esc to abort Enter/select line number to be deleted:  Parameter         Value
-------------+---------  Latest date
Latest time  Disk full Cannot archive transient cells             r 	O	 '/7>Fy'*07;@HNR[_djns{(5?MSY`gnw0F\aeq
{



CLU]ipy^`b


1
H
Z
o
~

!#%(+.02468:=ADGKOSW[_chknqtw{Report definition Invalid name Circular definition Input values must be in ascending order No cells defined NT RT TB XY numeric text Report: Extract: Table: Name: Group:  Report_definition Data_extraction Lookup_tables    Nonrecurring_tab Recurring_tab Time_based_plot XY_plot   Numeric Text   Enter name:  Enter/select name:   Text Variable   Enter text  Add_report Add_intermediate Delete Modify   P_head R_head C2_head C1_head Detail C1_foot C2_foot R_foot P_foot  Locate starting position, press escape to continue  Select_cell Define_record  Enter/select cell number:  Enter/select field number:  Enter table number:  Enter/select host number:  Enter/select line number:  Ascend Descend  No Major Minor  All Link Station Point Bit Pt_type  All Year Month Day Hour Minute  Date/time Discrete_sample  Date/time Analog_sample  Date/time Point_address Runtime(min)  Date/time Point_address Consumption  Date/time Point_address Consumption Peak_time Peak_demand  Date/time Point_address B_exc B_shr B_time NB_exc NB_shr NB_time  Date/time Point_address State/value Event_type  Fixed Currency Comma Percent Date Sdate Time Text Address  Right Left   Blk Blu Grn Cyn Red Mag Brn Gry Dgr Lbl Lgr Lcy Lre Lma Yel Wht  Name             Type ----------------+---- Rept Int Parameter            Value
-----------------+--------  Format
Field width
Fractional digits
Justification  Variable name    Type Level ----------------+----+------- Page parameter            Value         Axis parameter                Value
--------------+----------------         ------------------+----------------


Plot parmeter            Value
--------------+----------------  Title line (X axis title (Y axis title )Auto scaling 	)Min scale value 
 Record field 
)Max scale value  Line name  Line color 
 Record field  Line name  Line color  Record field  Line name  Line color  Record field  Line name  Line color  Page parameter            Value         Axis parameter                Value
--------------+----------------         ------------------+----------------


Plot parameter            Value
--------------+----------------  Title line (X axis title )Auto scaling )Min scale value 	)Max scale value 
 Record field X 
(Y axis title  Record field Y )Auto scaling )Min scale value 
)Max scale value  Host Name ----+---------------- Cell Cell name        Type ----+----------------+------------ Line Host Host name        Cell Cell name        Type ----+----+----------------+----+----------------+------------ D_sample A_sample Runtime Consumption Demand Override Event  Field Host Cell        Parameter Prop  Sort   Order Control Subfield
-----+----+----+----------------+----+-----+-------+-------+-------- 1 Date/time
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16

Time resolution(min)  N Y Entry      Input           Output -----+----------+---------------- Name ---------------- Name             Number    Type ----------------+------+------- Edit in progress Syntax error Invalid operand number Unbalanced parentheses Expecting a comma Equation too complex Enter equation                                     Equation
-------------------------------------------------------------------------------


Op     Type            Value  Operators      Descriptions
--+--------+----------------  --------------+---------------------------------- 
P0...P9        Operands - ~            Negate, Logical negate * / + -        Multiply, Divide, Add, Subtract 
= <> <=        Equal, Not equal, Less or equal < >= >         Less, Greater or equal, Greater & | ^          And, Or, Exclusive or ABS INT        Absolute value, Integer value RND CNT SUM    Round, Count, Sum AVG LOW HIGH   Average, Minimum, Maximum MO DAY YR DOW  Month, Day, Year, Day of week SDT            Serial date HR MIN MPM     Hour, Minute, Minutes past mid. LL SS PP BB TT Link, Station, Point, Bit, Type LUN LUT        Numeric table, Text table  Constant R_field Variable  Constant C_field  ?page ?time ?date - ~ * / + - >= <= <> > < = & ^ | MO DAY YR HR MIN MPM DOW CNT SUM AVG LOW HIGH LL SS PP BB TT ABS INT RND SDT LUN LUT ( ) , P          L ]    47:=@[cl3 	OiInstall archive  ; press Return/Enter to continue, Esc to abort Report generation Report:                  Extract: Parameter    First     Last
---------+--------+--------  Date
Time  Name             Type ----------------+------- NT RT TB XY Enter/select report name:   Print   Escape  Enter/select extraction name:  Report in progress  Automatic Manual  Please stand by (press ESCape to cancel) ... Daily Weekly Monthly Yearly Schedule  Enter report name:  Enter/select report name:  Automatic report generation Name                 Type ----------------+-------- Parameter                    Value               Schedule    Schedule
-----------------+----------------               --------    --------  Report definition  Data extraction  Time of day 	 Schedule type                &  Network configuration  # Program
-+---------------------  1 Network definition
2 DCU synchronization
3 Automatic DCU save
4 Special day broadcast
5 Off normal points
6 Disabled points
7 Data base print  Enter/select program number:                 	 .BZ w:c
%.7@IR!*3CP^gqv{Link configuration    Site configuration    Station configuration UC configuration       +-D  * NY No Yes  Entry not in save file Parent not in save file Unable to penetrate No phone line available Station already in save file Must delete lower levels to change type class Must delete and resave parent due to type class conflict Link Site Sta Link Type             Name              Dn Telephone number               Cnf Site Type      Name              Dn #st Speed Telephone number               Cnf Sta Type  Name              Dn #st Cnf UC  Type      Cnf ----+----------------+-----------------+--+------------------------------+--- ----+---------+-----------------+--+---+-----+------------------------------+--- ---+-----+-----------------+--+---+--- ---+---------+--- Parameter                           Value
------------+----------------------------  Type
Name
Downloadable                    Stations          Phone             Speed    Phone    Parameter            Value
---------+----------------  Type  Dialing, press ESC to abort Enter address:  Enter/select address:   Penetrate Edit Save Save_all  300 600 1200 2400 4800 9600 19200  7802_Lnk/Ln 7802_Lnk 7805_Lnk 7801_Hst/Lnk/Ln 7801_Hst/Lnk 7804_Hst/Lnk  7803_Tap 7806_Tap  7700 7750 7730 7760 7720 7770 7810 7716 7780 7718        VAV AHU HPMP General  v     	   Fr9]16;@EJOTY^cdefghiyDCU synchronization Automatic DCU save Special day broadcast Off normal points Disabled points Link Link Type            Name ----+---------------+---------------- Link Type            Name             Bdcst ----+---------------+----------------+----- Enter/select link address:  Enter Site address:   DCU_selection All_yes All_no   DCU_selection All_yes All_no Site_yes Site_no  No Yes N/A None Day Week Month N/A St Site Type Name              Sync --+----+----+----------------+----- St Site Type Name             Bdcst --+----+----+----------------+----- St Site Type Name             Smry --+----+----+----------------+---- St Site Type Name             Save --+----+----+----------------+---- 7700 7750 7730 7760 7720 7770 7810 7716 7780 7718       7801_Hst/Lnk/Ln 7801_Hst/Lnk 7804_Hst/Lnk 7802_Lnk/Ln 7802_Lnk 7805_Lnk  DCU_selection All_none All_daily All_weekly All_monthly  Holiday cannot cross end of year Date  Dur S1 S2 S3 S4 S5 S6 S7
-----+---+--+--+--+--+--+--+--


Scheduled broadcast    Value
-------------------+-------- 
 Date  Time   Day_format DCU_selection  . 8 I f l   	    
Ga~Trend Log Address     Name -----------+---------------- Time  %s %s               %-43s Page %1d
 Trend log Interval must be an integral divisor of 1440 minutes Print function disabled No samples available Printer currently in use Parameter             Value             Address     Name
---------------------+-----             -----------+----------------  Sample interval (min)
Print interval (min)
Print begin
Print end  Printing (press ESCape to cancel), please stand by...  Parameter_edit Add_point Delete_point Manual_generation  Enter new point address:  Enter/select point address:   Print  Point:         R%	 5=n;AGLQafky~ '.5=BGUalqvDOC to DIF Normal Estimated Disabled Line Conversion name  Generation schedule Extraction schedule
----+----------------+-------------------+-------------------   Automatic_report Immediate_conversion New_Conversion  Parameter                                      Value       Schedule    Schedule
--------------------+-------------------------------       --------    --------  Conversion name  Time of day  Generation schedule 	 Extraction schedule 
 Output file name  Batch file name  None Daily Weekly Monthly Yearly Schedule  Enter/select line number:  Enter/select source line number:  Enter/select target line number:  Line Host Cell Name             Type         Field
----+----+----+----------------+------------+------------------  D_sample A_sample Runtime Consumption Demand Override Event  Conversion name already exist Parameter                                  Value
----------------+-------------------------------  Earliest date  Earliest time  Latest date 	 Latest time 
 Output filename  Inconsistent cell type Install archive  ; press Return/Enter to continue, Esc to abort Data/resource not available  Insert Replace Delete Copy  No Yes  Generation_schedule Period_to_date Year_to_date  Enter new conversion name:  Enter/select host number:  Host Name ----+---------------- Enter/select cell number:  Cell Name             Type ----+----------------+----------- Line Field
----+------------  Host: Cell: Date Time Discrete_sample Date Time Analog_sample Date Time Point_address Runtime(min) Date Time Point_address Consumption Date Time Point_address Consumption Peak_time Peak_demand Date Time Point_address B_exc B_shr B_time NB_exc NB_shr NB_time Date Time Point_address State/value Event_type Date Time Point_address Flg P_time P_Dmd On_act Off_act On_est Off_est               ( 7 _  =q|Message routing : currently =   # Host station     Attended Unattended --+----------------+--------+---------- Day Attended hours
---+--------------  Sun        -  Mon        -  Tue        - 	 Wed        - 
 Thu        -  Fri        -  Sat        -   Temporary_control Automatic_control   Temporary_unattended Temporary_attended Automatic  Unattended Attended Temporary unattended Temporary attended     , O i      	%Graphics page print  Select_Page All_no All_yes Print  Enter/select page number: Page Name                       Print ----+--------------------------+----- Printing (press ESCape to cancel), please stand by... No Yes  Page number not found Read error Edit in progress Printer I/O error          & = 	`     -LOffline data base edit Unable to delete default save file Unable to delete remote save file Invalid DCU address Unable to convert station addresses DCU  Station name         Date  Time ----+----------------+--------+----- DCU Default .SAV Enter station address:  Enter/select station address:  Station type:  7700 7750 7730 7760 7720 7770 7716 7780 7718  Update save file?  Yes No               / 3 8 = C W r 	   Host phone numbers 300 1200 2400 9600  Enter tap address:  Enter/select tap address:  Enter/select copy tap address:  Tap already exists Tap does not exist Addr Name             Speed Telephone number
----+----------------+-----+-------------------------------                * A X o [GSY_goy#EYHost tap configuration Link tap configuration Site tap configuration Name
----------------


Firmware status                         Control parameter           Value
--------------------------              ------------------------+-------- 
 Revision no.
Revision date 
(Message priority (Message mask  Name
----------------


Firmware status                         Control parameter           Value
--------------------------              ------------------------+-------- 
 Revision no.
Revision date 
(Message priority (Message mask  Name              LAN addr
----------------+---------


Firmware status                         Control parameter           Value
--------------------------              ------------------------+-------- 
 Revision no.
Revision date 
(Message priority (Message mask  Speed ----- Speaker ------- LAN speed --------- Group Link Dial mask     Group Type Timeout Telephone number                N/V
-----+----+---------     -----+----+-------+-------------------------------+--- Not enough room for phone numbers 1200 2400 4800 9600 300 600 1200 2400 4800 9600 19200 Beep 30 60 - Normal Priority Critical Off Auto On 19200 9600 300 1200 Beep           
  ) 8 Site tap save Site tap restore Save?  No Yes  Restore?  No Yes        " 8 #2[>BPTq~Station configuration Station name                            Control parameter           Value
----------------                        ------------------------+--------


Daylight savings   Month Week Day
------------------+-----+----+---



Sunrise/Sunset              Value
------------------+-------------- (Date (Time (Message priority 	(Message mask 
(Time scheduling (Temperature control 
 Begin
End  Longitude                '  Latitude                 '  Time zone  Demand control All lights ON All lights OFF Station name                            Printer parameter           Value
----------------                        ------------------------+--------


Firmware status
---------------------------- (Baud rate (CTS handshake (Data bits 	(Stop bits
Revision no.
Revision date 
(Parity (Print mask  Firmware status                         Loading           Percent
----------------------------            -----------------+-------



Memory status                           Memory      Address Value
----------------------------            -----------+-------+-----



Database last changed
----------------------------  Revision no.  Revision date  Total bytes available  Bytes remaining  Save file  DCU (Processor (LAN (Contents Off On 300 600 1200 2400 4800 9600 19200  1 2 Odd None Even 7 8 - Normal Priority Critical   North South  West East  Invalid address              0`n 0<Lhiy (5AZck)Jdinr .7<FKPUZ_dinsxyz{|}Station save Station restore Station software save Software restore Save?  No Yes  Restore?  No Yes  Saving
------------------------------------  Restoring
------------------------------------  Configuration State descriptions Control descriptions Control commands Engineering units Conversion coefficients Special day assignments History parameters Override access codes Lookup tables Action messages DDC modules Event sequences Sunrise/sunset coefficients  Resident points Calculation extensions Event extensions Runtime/consumption/alarm extensions Time scheduling extensions Temperature control extensions Application extensions Trend extensions Demand loads System time  Select All_S/W_Yes All_S/W_No All_D/B_Yes All_D/B_No Download  Enter software directory name:  Software file already exist, replace it?  No Yes  Link Site Addr Type             Name             Software Database
----+----+----+----------------+----------------+--------+--------  Software No Yes  Downloading (press ESCape to cancel), please stand by... No downloadable devices found Software file not found:  Cannot create software file:  Software not loaded Boot strap request ignored Unable to verify software status Specified host not online .BIN .SAV DEF 7801 7802 7803 78041 78051 78061  78040 78050 78060  7700 7750 7730 7760 7720 7770 7810 7716  7780 7718  7801_Hst  7802_Lnk/Ln 7802_Lnk 7805_Lnk 7801_Hst/Lnk/Ln 7801_Hst/Lnk 7804_Hst/Lnk  7803_Tap 7730 7806_Tap  7700 7750 7730 7760 7720 7770 7810 7716 7780 7718           Dynamic data upload Dynamic data upload request has been initiated, press any key to continue                 C DCU passwords Level Password
-----+-------- 1 2 3 	4  Level 4 password must exist while lower level password(s) exist              F Y o     M 64VB^s	Station parameters Enter/select option:   # Description
--+---------------------------------  Control descriptions and commands State descriptions Conversion coefficients Engineering units Look-up tables  # Description Command Delay
--+-----------+-------+-----   # Description                           # Description
--+-----------                          --+-----------   #            M            B
--+------------+------------   # Description
--+-----------  Addr Name ----+----------------  0Conversion equation 0Equipment counts low 	0Equipment counts high 
0Engineering units low 0Engineering units high 0Press ESC to copy to M & B  Linear Flow  Save M=%f, B=%f :  Yes No  Enter/select look-up table:  Enter/select source look-up table:  Enter/select copy look-up table:   # Count Adj. Count                      # Count Adj. Count
--+-----+----------                     --+-----+----------   1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16 (17 (18 (19 	(20 
(21   # Count Adj. Count
--+-----+---------- Enter/select entry number:  Enter input counts:  Enter adjusted input counts:  Look-up table not defined Look-up table already defined No more entries allowed Values must be monotonically increasing Cannot insert at selected position         
7Jd"'.07@ISX]c{-E]s
7H`x")1;ELRY_eku|Resident I/O points Enter new point address:  Enter point address:  Point already exists Point already defined as a different type Illegal point name Point name already exists Point must be in different station Bad link address or link not defined and online Scan interval must be 10 or 60 Linear Flow 8-bit 16-bit 10-bit 1000-pulse Reflective Integrating Local LAN Link System - Normal Priority Critical Reinforce None Trip Close Parameter                          Value      Parameter             Value
----------------------------------------      ------------------+--------  Point name .Message priority
Point class .Message/cell mask
Scan interval (seconds) .Cell priority
Global level 	.Cell number  State description Number of bits Control description Momentary duration (seconds) Restart control action Normal state Alarm delay (seconds) Expected state Minimum trip (minutes) Minimum close (minutes) Time to state (seconds) Monitor point address Conversion equation Engineering units Conversion coefficients Offset Low sensor limit Low alarm limit High alarm limit High sensor limit Low output limit High output limit Broadcast change counts Accumulator type Scans between broadcast Non-linear lookup table Addr (xx) Point name              Scan  Message    Cell   Exten  ---------+-----------------------+----+----------+------+------- EI@-Y-CE?AT?TMRIIRRI?I?CDODUD??DLDState # bits Control Momentary Restart   Normal Delay Expect Min-T Min-C   TTS   Monitor  Equ   EU CC Ofst Sensor-l  Alarm-l  Alarm-h Sensor-h Output-l Output-h BCC Accum type  BScan LT           h u cr 
!'*.148<@EJNRX]dkqw|Calculations                                     Equation
-------------------------------------------------------------------------------


Operand            Point      Operand         Constant
-------+----------------      -------+----------------  Enter equation Syntax error Invalid operand number Unbalanced parentheses Expecting a comma Equation too complex Operand must be a point --+---------------- - ~ * / + - >= <= <> > < = & ^ | SQRT( MO DAY YR HR MIN MPM DOW ERH( EDP( RH( DP( HIGH( LOW( ERHSI( EDPSI( RHSI( DPSI( JULD AVG( OLD( TTS( ( ) , P C             +            Event definition Event type        Sequence/message #   State/value
----------------+--------------------+------------   State_change Specified_state Alarm High_alarm Low_alarm Normal High_crossing Low_crossing Sequence Message   8 H I O W \ c h m o s y ~       	 '?EMYEvent sequences  Start Start/l Stop Stop/l Inh. Ena.  Out Out/l Zero Non-zero Skip Sequence Action Enter/select sequence number:  Enter/select copy sequence number:  Enter sequence number:  Sequence already exists Sequence does not exist Sequence is too complex Seq.   # Name --+--------  # Name        Delay (sec)   Action            Point  Skip/value
--+--------    -----------+--------+----------------+-----------        h  Action messages  # Message
--+----------------------------------------------------------------  Enter/select message number:  Enter message                J_oRuntime Parameter                      Value
-------------------+----------------  On state
Cell mask
Cell priority
Cell number
Runtime accumulator
Reset mode  Address   On state Cell mask Cell priority Cell number Accumulator Reset type
---------+--------+---------+-------------+-----------+-----------+----------- None Constant Point  Reset threshold Reset point        m Consumption Parameter           Value
----------------+--------  Cell mask
Cell priority
Cell number  Address   Cell mask Cell priority Cell number
---------+---------+-------------+-----------           Alarm inhibit Parameter                                 Value
------------------------------+----------------  Status input
Enable state
Delay before enable (minutes)
Delay before inhibit (minutes)  Address   Status input  Enable state  Enable delay  Inhibit delay
---------+------------+-------------+-------------+--------------               f v              s 0Jg^x&B]sTime scheduling Host ATS schedules  Start Stop Cycle Ostart Ostop Ocycle N 1 2 B  Independent Slave Master  Action Time       Off  On Sun Mon Tue Wed Thu Fri Sat S1 2 3 4 5 6 7 T1 2
------+----------+---+---+---+---+---+---+---+---+---+--+-+-+-+-+-+-+--+-  Temporary   # Reaction  Adj Action        Off  On Su Mo Tu We Th Fr Sa S1 2 3 4 5 6 7 T1 2
--+--------+----+-------------+---+---+--+--+--+--+--+--+--+--+-+-+-+-+-+-+--+-  Temporary   # Action Time       Off  On Sun Mon Tue Wed Thu Fri Sat S1 2 3 4 5 6 7 T1 2
--+------+----------+---+---+---+---+---+---+---+---+---+--+-+-+-+-+-+-+--+-  Temporary  Time Sunrise Sunset Mirror Optimize Ignore Enter/select master point name:  Enter master point address:  Enter new schedule name:  Enter/select schedule name:  Enter/select copy schedule name:  Schedule name    Download ----------------+-------------- Parameter     Value
-------------+----------------  Name
Download  Address     Station name     Point name
-----------+----------------+----------------  Enter new point address:  Enter/select point address:   DC DO  Read error Write error No schedules defined Schedule name already exist Invalid name Point already exist Point does not exist Files busy Unable to open remote files Not a master ATS extension Extension too complex No schedule actions defined Master must be in same DCU       
     DCU special days Date  Dur S1 S2 S3 S4 S5 S6 S7          Date  Dur S1 S2 S3 S4 S5 S6 S7
-----+---+--+--+--+--+--+--+--          -----+---+--+--+--+--+--+--+--  - P T Holiday cannot cross end of year                  Temperature control Temperature input             Name
-----------------+----------------



Temperature control   Target (deg)    Diff (deg) Cycle adjustment(min/deg)
--------------------+-------------+-------------+-------------------------





Function select              Value
---------------------------+------  Outside air
Space  Cooling
Setup
Heating
Setback  Optimized start lookahead
Optimized stop lookahead
Demand temperature override            Outside   Space       Cooling    Setup    Heating   Setback Optimiz  
Address   Air       Temp      Tgt Dif Adj Tgt Dif Tgt Dif Adj Tgt Dif Str Stp O
---------+---------+---------+---+---+---+---+---+---+---+---+---+---+---+---+-       * 9 G T ` u     	 
Demand control Demand meters Demand loads Const Point Enter load address:  Enter/select load address:  Enter/select copy load address:  Interval must be a multiple of 5 minutes Load already exists Load does not exist Parameter                     Type            Value   Schedule Shed level
----------------------------+-----+----------------   --------+----------  Demand interval (minutes)  Cell mask  Cell priority 	 Cell number 
 Current demand point  Monthly consumption point  Normal shed level 
 Normal shed differential  Emergency shed level  Emergency shed differential  Override control point  Override shed level  Override shed differential  Load             Pri On  Size Max off ----------------+---+--+-----+------- Parameter                    Value
-----------------+----------------  Load
Priority
On state
Load size
Max off (minutes)  Meter address:   --------------------------------------- Scheduled Meter schedule      2 C Y     ,Tv/WxOverride billing Enter/select option:  Must enter a point with bit offset of zero Must enter a point with non-zero bit offset Duplicate access code  # Description
--+------------------- 1 Access codes 2 Equipment mapping 3 Override parameters  Access type     Access code             Zone Name             Access code
---------------+-----------             ----+----------------+-----------  Non-billable  Interrogate  Control  Equipment parameter Value               Zone Name             Load (%)
-------------------+-----               ----+----------------+--------  Load size (KW)  Base load (%)  ------------------------- Docutrend parameter     Value           Equipment points
--------------------+--------           ----------------





End of override notice  Value
-----------------------+-----  Cell mask  Cell priority  Cell number 
 Wink off interval (sec)  Wink on interval (min) 9(Wink point)  ----------------------------- Override #%d  (wink)             - F    Unitary controller configuration 7720 Input configuration Address      Type       Address      Type
-------+---------       -------+---------  Internal VAV AHU HPMP General Internal DI/Memory DI/GI AI PI            @ 	g    UC to UC copy Enter target point number(PP):  Enter/select source point number(PP):  Source must be different from target Source:  Target:   Abort Overwrite   ! & , 2 -BTrend sampling None Times Point Parameter                        Value
---------------------+----------------  Cell mask
Cell priority
Cell number
Cell sample count
Base time (hh:mm)
Interval (minutes)
Number of samples
Sample control mode  Sample start (hh:mm) Sample stop (hh:mm) Sample control point Address   Cell mask Pri Cell C samp  Base Intrvl Samples  Mode Sample control
---------+---------+---+----+------+-----+------+-------+-----+--------------     , = F T Trend plot No trend extension No trend samples  Escape  Sample values Sample times                J [ q {    	     <`~)l

Unitary control  UC History parameters UC tuning Point:  Enter point name:  Address     Name -----------+---------------- Point must be in controller Extension already being sampled No extensions are being sampled Extension not being sampled Extension must be PID or Float type Extension/point type conflict Auto On Off  Direct Reverse  VAV control AO-PID AO-FLT AHU control DO-PID DO-FLT Heat pump  VAV AHU PID FLT HPMP   PID FLT  ------------------------------------ Setpoints         Target Diff           Inputs and Outputs                Value
-----------------+------+----           ----------------------+----------------








Overrides                        Value
---------------------+----------------  Cooling - setup          - economy          - normal 	 Heating - normal 
         - economy          - setback  Setpoint adjustment   Range (deg)  Timed override   Indicator   Duration (min)  Economy override  Damper override (Space temperature (Central plant heat (Temperature setpoint 	(Fan 
(Cooling fan control (Heating fan control (Stage 1 heating 
(Activation delay (sec) (Stage 2 heating (Setpoint offset (deg) (Stage 3 heating (Setpoint offset (deg)  Parameter                            Value
-------------------------+----------------  Input (process variable)   Filter (samples)   Low limit 	  High limit 
 Output   Control point (%)   Ramp limit (%) 
  Low limit   High limit  Proportional band  Reset interval (sec)  Rate interval (sec)  Mode  Parameter                            Value
-------------------------+----------------  Input (process variable)   Filter (samples)   Low limit 	  High limit 
 Output (increase)  Output (decrease)  Throttling range (sec) 
 Turn-around time (sec)  Proportional band  Reset interval (sec)  Rate interval (sec)  Mode  Setpoints         Target Diff           Inputs and outputs                Value
-----------------+------+----           ----------------------+----------------








Overrides                        Value
---------------------+----------------  Cooling - setup          - economy          - normal 	 Heating - normal 
         - economy          - setback  Setpoint adjustment   Range (deg)  Timed override   Indicator   Duration (min)  Economy override  Warmup/cooldown (min) (Space temperature (Fan (Fan control 	(Stage 1 cooling 
(Interstage delay (sec) (Stage 2 cooling (Interstage delay (sec) 
(Setpoint offset (deg) (Stage 3 cooling (Setpoint offset (deg) (Stage 1 heating (Stage 2 heating (Setpoint offset (deg) (Stage 3 heating (Setpoint offset (deg) (Damper control  Parameter                            Value
-------------------------+----------------  Setpoint  Input (process variable)   Filter (samples) 	  Low limit 
  High limit  Output   Control point (%) 
  Ramp limit (%)   Low limit   High limit  Proportional band  Reset interval (sec)  Rate interval (sec)  Mode  Parameter                            Value
-------------------------+----------------  Setpoint  Input (process variable)   Filter (samples) 	  Low limit 
  High limit  Output (increase)  Output (decrease) 
 Throttling range (sec)  Turn-around time (sec)  Proportional band  Reset interval (sec)  Rate interval (sec)  Mode  Setpoints         Target Diff           Inputs and outputs                Value
-----------------+------+----           ----------------------+----------------








Overrides                        Value
---------------------+----------------  Cooling - setup          - economy          - normal 	 Heating - normal 
         - economy          - setback  Setpoint adjustment   Range (deg)  Timed override   Indicator   Duration (min)  Economy override  Warmup/cooldown (min) (Space temperature (Fan (Fan control 	(Reversing valve 
(Compressor #1 (Interstage delay (sec) (Compressor #2 
(Interstage delay (sec) (Setpoint offset (deg) (Compressor #3 (Setpoint offset (deg) (Heater strip #1 (Setpoint offset (deg) (Heater strip #2 (Setpoint offset (deg) (Heater strip #3 (Setpoint offset (deg) (Damper control                    7aizParameter               Permanent   Current
-----------------------+---------+---------  Setpoint
Proportional band
Reset interval (seconds)
Rate interval (seconds)   Manual_tune Input_output_plot   Manual_tune Input_output_plot Automatic_tune  Press ESCape to exit the Input_output_plot Please stand by..., press ESCape to abort Samples Process variable Output Heap space exhausted Maximum waiting time expired Update module parameters?  Yes No               	 2H^LP_n2=ELU}
.7BKTaq	0ARdv!4H\mx(>QDirect digital control Enter/select module number:  Enter/select copy module number:  Enter module number:  Module already exists Module does not exist Module must be PID or Float type Module already being sampled No modules are being sampled Module not being sampled Mod.  - 2_Pos PID Float Reset HiLo Relay  - Line Point Const Standard Delay_before_make Delay_before_break Interval_timer 0 1 Direct Reverse   #  Type Name ---+-----+-------- Parameter       Type            Value
--------------+-----+----------------  DDC History parameters Module: %3d  Name: %-8s  Type: %5s
----------------------------------------
 DDC tuning Module: Type:  Number:  Parameter (Tuning)                Value ----------------------+---------------- No Yes Module name Sample interval (sec) Setpoint Discrete input Setpoint offset Input Primary input Input #1 DI=0 input Secondary input Input #2 DI=1 input Input #3 Input #4 Input filter Input low limit Input high limit Output Output Output (inc) Output Hi signal out Output Output (dec) Low signal out Failsafe command Differential Output ramp limit (%) Throttle range (sec) Turn-around (sec) Output low limit Output low limit Output high limit Output high limit Control point Proportional band (%) Reset interval (sec) Rate interval (sec) Mode Primary input #1 Primary input #2 Primary output #1 Primary output #2 Secondary input #1 Secondary input #2 Secondary output #1 Secondary output #2 Time delay (sec) Relay type Actuator mode Sample interval (sec) Proportional band (%) Reset interval (sec) Rate interval (sec) Adaptive control Maximum bump (%) Maximum adjustment (%) Settling time (sec) Maximum overshoot (%) Target damping (%) Noise band (%) * E O U \ a g m t r|Time schedule activity log Temporary Start Ostart Stop Ostop Cycle Ocycle %74s

  Date   Time    Address   Host Init   Type    Action Time  Off  On Sun Mon Tue Wed Thu Fri Sat S1 S2 S3 S4 S5 S6 S7 T1 T2
--------+-----+-----------+----+----+---------+------+-----+---+---+---+---+---+---+---+---+---+--+--+--+--+--+--+--+--+--
 Del exten Add exten Mod from Mod to Del Add Mod from Mod to N 1 2 B           
  % B H Trend Log Address     Name -----------+---------------- Time  %s %s               %-43s Page %1d
     T e v     	 
  	-IWInvalid password Enter password:  Enter/select target device:  Enter/select phone number:  Enter phone number:   300 600 1200 2400 4800 9600 19200  No phone line available Addr Name ----+---------------- Addr Name             Speed Telephone Number
----+----------------+-----+-------------------------------  300 1200 2400 9600   Site Direct ADAA  Host   7700 DCU 7750 ORB 7730 DCU 7760 UCI 7720 DCU 7770 ICI 7810 TAP 7716 PCU 7780 LCU 7718 PCU       Enter DCU password:  ATE0Q0V0S0=0
AT&C1&D2
ATD Modem timeout Unable to make connection                 ) 	6GYfMODBUS configuration Description                           Value
----------------------------------+--------  MODBUS port status
MODBUS interface type
MODBUS slave address
MODBUS protocol
Baud rate
Stop bits
Parity
Delay before response (sec)  Data bits
Character completion timeout (sec) Disabled Enabled RS232 RS422 RS485 Binary ASCII 300 600 1200 2400 4800 9600 19200 1 2 Odd None Even 7 8      ( 1 r TITLE LINE Normal Estimated Disabled Report generation scheduled at this time; press Enter to proceed with the report, Esc to reschedule            |               (06UmR-o(
~							
5
Lighting control Zones Circuits  On Off Cycle Ostart Ostop Ocycle N 1 2 B  Time Sunrise Sunset Single_pushbutton Dual_pushbutton Latched  Permanent Timed  0.5 1.0 1.5 2.0  No Yes   # Description
--+-------------------------   1 Zone definitions
 2 Lighting circuits  Enter/select option:  Enter/select zone number:  Enter/select source zone number:  Enter zone name (press Enter for default):  Enter circuit name (press Enter for default):  Enter indirect point address:  Enter/select override:  Enter override name (press Enter for default):  Enter/select circuit number:  Enter/select source circuit number:  Zone point does not exist, do you wish to add it?  Yes No   Circuit_assignment Time_schedule Override_parameters  Circuit point does not exist, do you wish to add it?  Yes No   Select All_yes All_no Accept  Override point does not exist, do you wish to add it?  Yes No  Override previously assigned to this zone, change it?  Yes No  There will be %d extensions added, %d replaced; proceed?  Yes No   # Address     Name --+-----------+----------------  # Address     Name             Target --+-----------+----------------+------ Action Time       Off  On Sun Mon Tue Wed Thu Fri Sat S1 2 3 4 5 6 7 T1 2
------+----------+---+---+---+---+---+---+---+---+---+--+-+-+-+-+-+-+--+-  Temporary  Parameter                            Value
------------------------+-----------------  Input point
Input type  Override type Override time (minutes) Parameter           Copy
-------------------+----  Lighting circuits
Time schedules
Override parameters   # Address     Name                           Zones --+-----------+----------------+----------------------------------- Parameter                      Value
------------------------------+-----





Control source                  Wink
------------------------------+-----  Delay before off (minutes)
On duration (seconds)
Off duration (seconds)
Wink cycles 
 Manual - host
Manual - HHC
Automatic time scheduling
Demand limiting/load shedding
Event sequence
Building manager
Override input  Override input                 Ovr type              Circuits
------------------------------+---------+----------------------------------- Off delay On duration Off duration Wink Hst HHC ATS Dmd Evt Orb Inp
---------+-----------+------------+----+---+---+---+---+---+---+--- Zone %d Circuit %d Zone %d override Conflicting point type exist at this address Point must be in different station Bad link address or link not defined and online Must edit schedule from ATS editor                 M3/>RZhjx 3@LU^gpySystem configuration summary Selected function not available for current configuration Not connected to a link  Host Link Station UC  Communicating No response Addr Host PC name    
----+----------------  Addr Type                Host tap name       Revision   
----+-------------------+----------------+--------------  Addr Type                Link tap name       Revision   
----+-------------------+----------------+--------------  Addr Site Type                Station name     Stations   Revision   
----+----+-------------------+----------------+--------+--------------  Addr Site Type                Status       
----+----+-------------------+-------------    7801 Host/Link/Lan 7801 Host/Link 7804 Dial Host/Link Invalid 7801 Host tap   7802 Link/Lan 7802 Link 7805 Dial link tap 7801 Host/Link/Lan 7801 Host/Link 7804 Dial Host/Link Internal VAV AHU HPMP General   7803 Lan tap 7802 Link/Lan 7806 Dial Lan tap Invalid 7801 Host/Link/Lan 7807 DCU tap 7809 Bridge 7700 DCU 7750 ORB 7730 DCU 7760 UCI 7720 DCU 7770 ICI 7810 Printer tap 7716 PCU         7780 LCU 7718 PCU   7803 Lan tap 7730 DCU 7806 Dial Lan tap 