        README.TXT FOR WEALTHBUILDER 3.1 BY MONEY MAGAZINE

ABOUT THE SUPPLEMENT: You should have received with this copy
of WealthBuilder either:

    * a WealthBuilder 3.1 User's Guide
                   OR
    * a WealthBuilder v3.0 User's Guide and a v3.1 Supplement.

If you have a v3.1 User's Guide you do NOT need the Supplement.
   	

CORRECTION TO THE V3.1 SUPPLEMENT:

page 79 - first paragraph: 
          WealthBuilder requires 510K of RAM, not 495K.


IF YOU ARE HAVING TROUBLE:

   WealthBuilder 3.1 requires 510K of RAM to run.  If you do
     not have 510K free, see Section 4.8.6 of the Supplement
     or v3.1 User's Guide and follow the instructions to
     "Optimize Your Current RAM."

   WealthBuilder 3.1 also requires approximately 9 meg of
     hard disk space.  When you install the program, to save
     space see Section 4.9 of the Supplement or v3.1 User's
     Guide.  Additionally, after you have imported ANY and
     ALL files from other programs you can delete
     WealthBuilder 3.1's importing files.

        If you plan to import again sometime in the future,
        you should NOT delete WealthBuilder 3.1's importing
        files.

     To delete these files type:

        del c:\money3\program\wb3imp.exe
        del c:\money3\program\import?.exe
        del c:\money3\program\import?.txt

     assuming that you have installed WealthBuilder 3.1 in
     c:\money3.

   Stealth Option in QEMM
     Some incompatibilities have been identified while using 
     the stealth Option in QEMM.  If you encounter any 
     problems, turn off the Stealth option.  For more 
     information about QEMM, see the last paragraph of
     Section 4.8.1 of the Supplement or v3.1 User's Guide.

   PRODIGY
     If you have not yet received your free PRODIGY kit and 
     would like one, you can sign up for PRODIGY using 
     WealthBuilder.  To do so, press the [F]irst Time User
     button when you first start the WealthBuilder program, or
     go to the Send list once you are in the program.  Your 
     PRODIGY software will be included with your 
     WealthBuilder Welcome kit.

   Run WealthBuilder Faster
     There are a number of options to speed up WealthBuilder.
     See Section 4.8 of the Supplement or v3.1 User's Guide
     for more information.

     WealthBuilder Command Line Options...

         -stop             Remove BTRIEVE from Memory
         -DMM/DD/YY        Set BYPASS date
         -nopre            Disable Auto-Recovery for BTR files
         -log logFileName  Tech Support Logging File

     Code Overlay Manager Controls ("BLINKER" variable) can be
     changed in the setups.bat file in the WealthBuilder root
     directory.

         /ooN = Conventional Memory To Use N=(default=28K Bytes)
         /opN = Use EMS Page Frame to execute code N=(0=disable,1=ENABLE)
         /ouN = Use Upper Memory for Overlay Kernel N=(0=disable,1=ENABLE)
         /CEnnn,nnn = Amount of EMS To Use and leave (default=256,90%)
         /CXnnn,nnn = Amount of XMS To Use and leave (default=256,90%)
         (example: set blinker=/oo80/ou0/CX512,50%)

     WealthBuilder Controls can be changed in the setups.bat file
     in the WealthBuilder root directory.
     (DO NOT CHANGE THESE WITHOUT THE ADVICE OF Technical Support!)

         rtcc = Number of File Definitions to Buffer (default=5)
         rtcg = Number of Files to Buffer (default=2)
         rtcm = Size of Buffers for Files (default=7168)
         rtcb = Total Memory DEMANDED by System (default=60(K Bytes))
         rtlm = Memory to leave unused (default=17(K Bytes))
       loadhi = Command prefix for loading TSRs HIGH (default=NONE)
                For DOS 5.0 users:  set loadhi=lh
                For QEMM users:     set loadhi=loadhi

   Other Problems
     See the Help Me--I'm Stuck chapter of the Supplement or
     v3.1 User's Guide.


IF YOU HAVE WINDOWS:

   If you have Windows, version 3.0 or later, you can 
   install a WealthBuilder Windows group:

      1.  Type "win win_inst" at the WealthBuilder DOS prompt.
          (The prompt should be C:\MONEY3> if you accepted 
          WealthBuilder's default installation)

      2.  Check that the WealthBuilder path shown is correct.
          If it is not, correct it.

      3.  Click on OK to create the group and exit to Windows.

   To run WealthBuilder under Windows, go to the WealthBuilder
   Windows group and double-click on the WealthBuilder launch 
   icon.

CORRECTION TO THE WEALTHBUILDER 3.0 USER'S GUIDE:

p. 62 - Two WealthBuilder members sharing one machine
     If you have two WealthBuilder members who share the 
     same PC, your PC need only one database update 
     per month, not two.  Both members then share the 
     Research database files and monthly update.

ABOUT THIS FILE:
   This file contains an update to the WealthBuilder
   User's Guide.

Reading This File
   To read this file online, one screen at a time, type the 
   following, at the DOS prompt in the MONEY3 directory:

             TYPE README.TXT | MORE

   You can print each screen by pressing <Shift><PrtSc> while 
   you are viewing the screen.

   If you are connected directly to a printer, you can print the 
   whole file at once; at the C:\> prompt, type:

        PRINT README.TXT   and press <Enter> twice.

   If you are not connected directly to a printer, or the above 
   directions do not work, read the file into your word 
   processor and then print it from there.
