@LANGUAGE Deutsch
@LANGUAGE English
@+Deutschmiro Computer Products AG                               02.07.1993

                        Aktuelle Informationen
                    ==============================

Allgemeine Hinweise:

        Wenn Sie den "Quarterdeck expanded memory manager"
        QEMM386 und hierbei die Stealth Option ST:x verwenden,
        mssen Sie den Aufruf von QEMM386.SYS in ihrer Datei
        CONFIG.SYS um einen Parameter XST=C000 erweitern.

        Wenn Sie Probleme bei einem COMPAQ DESKPRO 486/33L
        haben, so sollten Sie mit Hilfe eines Memory-Managers
        (z.B. QEMM386) ein ROM-Shadowing fr das Video-BIOS
        realisieren. Fhren Sie folgende nderung in der Datei
        CONFIG.SYS durch:
        QEMM386    : DEVICE=...\QEMM386.SYS ... ROM X=A000-C7FF

        Bei einer RAINBOW Win EISA kann es zu Problemen in 
        Zusammenhang mit einem Adaptec-EISA-Busmaster-SCSI-
        Controller (1742 o..) kommen. Der Rechner bootet 
        dann nicht mehr richtig. Als Lsung sollten Sie im 
        Motherboard-BIOS-Setup ROM-Shadowing fr das Video-
        BIOS aktivieren. Lesen Sie dazu das Handbuch zu Ihrem 
        Rechner.


Hinweise zur Zweikarten-Konfiguration:

        Wenn Sie einen Memory-Manager verwenden, mssen sie den
        Speicherbereich von A000h bis C7FFh explizit ausschlieen.
        Fhren Sie folgende nderung in der Datei CONFIG.SYS durch:

        QEMM386    : DEVICE=...\QEMM386.SYS ... X=A000-C7FF
        386MAX     : DEVICE=...\386MAX.SYS ... RAM=A000-C800
        MS-Windows : DEVICE=...\EMM386.SYS ... X=A000-C800
        MS-DOS 5.0 : DEVICE=...\EMM386.EXE ... X=A000-C800
        DR-DOS     : DEVICE=...\EMM386.SYS ... /E=A000-C7FF

        Treiber, welche direkt in den VGA-Speicher schreiben
        (z.B. Maustreiber) mssen immer auf der primren / 
        ersten Karte gestartet werden. Ist die Bildschirm-
        ausgabe auf die sekundre / zweite RAINBOW Win umgeleitet, 
        mu vorher mit "OCTOINI -K1" zurckgeschaltet werden.

        In einer Zweikarten-Konfiguration RAINBOW Win Vesa-Local-
        Bus (VLB) mit einer weiteren RAINBOW Win (ISA oder EISA)
        mu die VLB Karte immer als primre bzw. erste Karte
        gejumpert sein.


Hinweise zu Windows:

        Bei Windows in der Auflsung 640 x 480 sollten Sie mit
        miroSUPERSCREEN kein "TV-OUT" in Kombination mit der
        Option "OVERSCAN" anwhlen.

        Wenn Sie schwarze Symbole in einer Ihrer Programmgruppen
        vorfinden (bzw. eine darauf hinweisende Fehlermeldung),
        dann befinden sich zu viele Symbole in dieser Gruppe.
        Teilen Sie diese Gruppe in kleinere auf. Dies ist eine
        Beschrnkung von Windows bei Treibern mit 65k/16,7M Farben.

        Unter CorelDraw knnen Sie eine merkliche Beschleunigung
        bei der Ausgabe von Polygonen erreichen, wenn Sie in der
        Datei CORELDRW.INI in der Sektion
          [CDrawConfig]
            UseClippingForFills=0
        aufnehmen. Wenn Sie eine andere Karte installieren,
        sollten Sie diesen Eintrag wieder auf den Default-
        wert 3 setzen. Ebenfalls wre mglich, in der Datei 
        SYSTEM.INI in der Sektion
          [928.drv]
            polygon-support=NO
        zu setzen. Dies wre vom Resultat jedoch nicht ganz 
        so gut und wrde andere Applikationen u.U. sogar ver-
        langsamen. Der Defaultwert fr diesen Eintrag ist YES.


Hinweis zum miroADI-Treiber:

        Der miroADI-Treiber untersttzt z.Z. noch nicht den
        Feinabgleich des Installprogramms, da er seine Video-
        initialiserung noch ber das RAINBOW Win BIOS realisiert.
        Diese Funktion wird mit der nchsten Disk-Release vor-
        handen sein.

@+Englishmiro Computer Products AG                               July 2, 1993

                        Current Information
                    ===========================

General information:

        If your are using the "Quarterdeck expanded memory
        manager" QEMM386 with the stealth option ST:x, you
        have to add a parameter XST=C000 to the call of
        QEMM386.SYS at the CONFIG.SYS file.

        If you encounter problems with a COMPAQ DESKPRO 486/33L,
        use a Memory-Managers (e.g. QEMM386) to carry out a ROM
        shadowing for the Video BIOS. Change the CONFIG.SYS file
        in the following way:
        QEMM386    : DEVICE=...\QEMM386.SYS ... ROM X=A000-C7FF

        With a RAINBOW Win EISA in combination with a Adaptec EISA
        busmaster SCSI controller (e.g. 1742) you may encounter
        problems. The computer does not boot correctly. To solve
        this problem, you can activate the ROM-shadowing for the
        Video BIOS in the Motherboard BIOS Setup. Please refer
        to the documentation that came with your computer.


Information about the dual-board configuration:

        If you are using a memory manager in a dual-board-
        configuration then it is absolutely necessary to
        exclude the memory area from A000h to C7FFh. Please
        enter the following changes to the file CONFIG.SYS:

        QEMM386    : DEVICE=...\QEMM386.SYS ... X=A000-C7FF
        386MAX     : DEVICE=...\386MAX.SYS ... RAM=A000-C800
        MS-Windows : DEVICE=...\EMM386.SYS ... X=A000-C800
        MS-DOS 5.0 : DEVICE=...\EMM386.EXE ... X=A000-C800
        DR-DOS     : DEVICE=...\EMM386.SYS ... /E=A000-C7FF

        Drivers which write directly into the VGA memory 
        (e.g. mouse drivers) have always to be started on the 
        primary / first board. If the image is output on the 
        secondary board you have to switch back before by entering
        "OCTOINI -K1".

        In a dual-board configuration with RAINBOW Win Vesa Local
        Bus (VLB) and a second RAINBOW Win (ISA or EISA), the VLB
        board has to be configured as board 1 by setting the
        jumper.


Information on Windows:

        At the 640 x 480 resolution do not select the "TV-OUT"
        mode with miroSUPERSCREEN together with the "OVERSCAN"
        option.

        If the icons in one of your Program Group are black
        (or you get an error message concerning this), there
        are too many icons in this group. Split this group up
        into smaller one. This is due to Windows and occurs
        with 65k/16.7 mill color driver.

        With CorelDraw you can accelerate the polygon output
        considerably by entering in the CORELDRW.INI file in 
        the section 
          [CDrawConfig]
            UseClippingForFills=0
        When installing another board, this entry should be
        reset to the default value 3. It is also possible to
        enter in the SYSTEM.INI file in the section
          [928.drv]
            polygon-support=NO
        The result is, however, not as effizient and could 
        slow down other applications. The default value for
        this entry is YES
        

Information on the miroADI driver:

        At the time the miroADI driver does not support 
        the fine tunig function of the installation program 
        because the video initialisation is carried out via 
        the RAINBOW Win BIOS. The driver will realize this 
        function with the next disk release.

