
Lotus 1-2-3 for DOS R2.3/2.4 Wysiwyg Driver 

Here is your 1-2-3 for DOS Release 2.3 and 2.4 Update package to install
a HP LaserJet 4Si/4Si MX printer driver used to create output from the 
Wysiwyg (:Print) publishing environment of 1-2-3 for DOS.  This driver is 
not available in 1-2-3 native-mode (/Print) or PrintGraph. 

Lotus' driver for the HP LaserJet 4Si/4Si MX printer is enhanced to 
support PCL5 and HP-GL/2 to take advantage of internal scalable fonts and 
vector graphics drawing for superior performance.  Lotus and HP have 
worked closely together to ensure that as many of the new capabilities of 
the HP LaserJet 4Si/4Si MX printer as possible are supported by 1-2-3 for 
DOS. 

Lotus and Hewlett-Packard hope that the HP LaserJet 4Si/4Si MX printer 
driver meets your needs. 

HP LaserJet 4Si/4Si MX Printer Features Supported: 

Fonts
  On Board Scalable Font Selection
     CG Times, Univers, Albertus, Antique Olive,
     Garamond Antiqua, CG Omega 
HP-GL/2
  Full Vector Graphics Drawing
  True Text Rotation
PJL Support
  PCL5 Language Switching

INSTALLATION NOTES:

Before proceeding with the update, please make sure there is at least 1.3
megabytes of hard disk space available on the disk containing your 1-2-3
program.  This amount of disk space is required temporarily to allow the
update to create copies of the files that will be modified.  This is done
to insure that the integrity of all files being affected remains intact
during the update procedure.

To install the driver from the Printer Driver disk, follow these instructions:

1. Insert the Update disk in drive A: (or B:)

2. At the operating system prompt, type A: (or B:) and press ENTER to make
   A: (or B:) the current drive.

3. At the prompt, type DRIVE4Si

   A)  At the main menu, select  Lotus 1-2-3 Version 2.3, 2.4

   B)  Select Copy Driver File(s)

   C)  Enter the path of your Release 2.3 or 2.4 directory, and then press 
       ENTER.   For example, if you have Release 2.3 and your directory is 
       C:\123R23, you would type C:\123R23 and then press ENTER.

   When the update is complete, the following message 
   appears:   "To take advantage of the new printer driver, you must now 
   run the 1-2-3 Install program."

4. You must now run the Install program. Follow the instructions in chapter
   4 of Getting Started (if you have Release 2.3) or chapter 5 of Getting
   Started (if you have Release 2.4) to start Install.

   A) In the 1-2-3 Install program, choose "Change selected equipment"
   and then choose "Add New Drivers to the Library" and identify the drive
   A: (or B:) containing this Update disk.  When Install indicates that it 
   has completed adding the new drivers, choose "Return to Main Menu".

   B) Choose "Select Your Equipment" from the Install Main Menu and follow
   the instructions on the screen.  The new printer driver provided on 
   this disk is a "Graphics printer", its name will appear in Install's menu 
   as:  "HP LaserJet 4Si PCL5"

   C) Make sure you select "Yes" when Install asks if you want to "Generate 
      Fonts".

   If you have multiple driver sets, you must recreate each
   driver set using "Select Your Equipment".


=============================================================================

APPLICATION NOTES:

1-2-3 for DOS will automatically use internal scalable typefaces resident
in your printer when you select to use the "HP LaserJet 4Si PCL5" driver in
Wysiwyg, the publishing environment which is part of 1-2-3 for DOS.

If you have a 1-2-3 spreadsheet which you would like to try printing with
your new HP LaserJet 4Si/4Si MX printer driver, just "/File Retrieve" it.  
Make sure that you select the appropriate driver and interface through 
Wysiwyg's ":Print" menu or through the dialog box.  Then choose ":Print 
Range Set", and when your printer is ready, choose ":Print Go". 

Refer to your 1-2-3 User's Guide if you need more information on printing 
with 1-2-3's Wysiwyg or the ":Print" menu(s).

The following fonts in 1-2-3's Wysiwyg display will automatically map to 
your HP LaserJet 4Si/4Si MX printer: 

Swiss => CG-Universe    Dutch => CG-Times    

You can also select the HP LaserJet 4Si/4Si MX printer fonts by name 
through the Wysiwyg menu ":Format Font Replace (1-8) Other". 

Then:
     "Select the typeface"
        "Fontsize in points"

Please keep in mind that 1-2-3's Wysiwyg display can not show you the 
actual font available on your printer.  Moreover, you may notice that
the spacing between characters changes on screen when you've selected
to use a font available in your HP LaserJet 4Si/4Si MX printer.  This is 
done to indicate the width of characters as they will appear on your 
printed output. 

HP LaserJet 4Si/4Si MX Printer Fonts Selectable Through Wysiwyg: 

     CG Times                          HP-TIMES.IFL 
     Univers                           HP-UNVRS.IFL  
     Albertus                          HPALBERT.IFL
     Antique Olive                     HPANTOLV.IFL
     Garmond Antiqua                   HPGARAMD.IFL
     CG Omega                          HPOMEGA.IFL

===========================================================================
(C)opyright 1992-1993 Lotus Development Corporation

All rights reserved

===========================================================================

SPECIAL NOTES:

If you are using Virus Scanning Software

This modification will alter existing files, which may cause a
virus checking program to report a virus.

If you are using a virus scanning program that is memory resident,
you may wish to disable the resident virus scanner before proceeding
with the update, and re-enable it afterwards.

If you are using a non-memory resident virus scanning program that
maintains a record of files on your disk, you may receive a report
that some files in the 1-2-3 directory you updated have been modified
since they were was last scanned. You may wish to have the virus scanner
re-scan your 1-2-3 directory immediately following this modification
in order to update the record of the 1-2-3 files.

===========================================================================

ERROR MESSAGES

"ERROR: There is not enough free disk space.
 1.3MB of free disk space is temporarily needed to perform the update."

This indicates that insufficient disk space is free on the drive containing
the 1-2-3 files you are updating. 1.3 megabytes of disk space is required
temporarily to allow the update to create copies of the files that will be 
modified. This is done to insure that the integrity of all files being 
affected remains intact during the update procedure.

ͻ
                                                                      
 IMPORTANT NOTE:  IF YOU UPGRADE YOUR 1-2-3 RELEASE 2.3 TO A MORE     
                  RECENT COPY OF 1-2-3 REL 2.3, OR TO 1-2-3 REL 2.4,  
                  THE LASERJET 4Si DRIVER MUST BE RE-INSTALLED        
                  USING THE UPDATE COMMAND, AND 123 INSTALL.          
                  RETAIN THIS DISK FOR THAT PURPOSE.                  
                                                                      
ͼ

If displayed, this indicates that the UPDATE command has identified that
the original version of 1-2-3 release 2.3 is installed, and has made the
appropriate version of the HP LASERJET 4Si/4Si MX driver available.  You 
are warned that, if in future, you upgrade to a more recent version of 1-
2-3 release 2.3 or 1-2-3 release 2.4, you must run the UPDATE procedure 
again followed by 1-2-3 Install.  Retain the disk for that purpose. 

===========================================================================
[v.7.31.E]

