*===================================================================*
*=====                                                         =====*
*=====     CPU Monitor Plus, Version 2.30.  README.TXT file.   =====*
*=====                                                         =====*
*===================================================================*


The following notes pertain to CPU Monitor Plus, version 2.30.

December 1993


1. Additional performance reporting is available for OS/2 version
   2.1 on most hardware and device driver platforms.  The Custom 
   System Display and Custom System Fields dialog are only enabled 
   for this version of OS/2.  The dynamic link library, CPUMONS.DLL, 
   is required for this reporting.

   Setup will copy the CPUMONS.DLL file to the specified dynamic
   link library target directory only if the operating system is
   OS/2 2.1.

   Some additional performance reporting may be valid for OS/2 
   version 2.0.  To enable the Custom System Display for OS/2 2.0,
   copy the CPUMONS.DLL from the installation diskette to the same 
   dynamic link library directory specified in Setup.  Note that 
   using CPUMONS.DLL with OS/2 version 2.0 is not supported and 
   may not yield accurate results for all fields.

   If CPU Monitor Plus fails to start, remove the CPUMONS.DLL
   file from the installation directory and try again.


2. The Custom System Display may not be useful for every hardware 
   and device driver platform, even when using OS/2 version 2.1.
   In particular, performance reporting for non-standard 
   communications port (COM) drivers may not be available or 
   accurate.


3. Running more than one OS/2 performance monitoring program
   simultaneously is not recommended.

