
//--------------------here is what our config.sys looks like!---------------//
lastdrive=f

:device=\sys\setver.exe
:device=\qemm\qemm386.sys ram nosh
:device=\qemm\loadhi.sys /r:2 \sys\ramdrive.sys 1024 512 /A

device=\sys\himem.sys
device=\sys\smartdrv.exe /double_buffer

device=d:\cdr\aspi4dos.sys /p330 /d /i /norst
device=d:\cdr\cdrom.sys /d:recorder

dos=high
files=50
buffers=30
stacks=9,256
shell=c:\command.com /p /e:1024
//--------------------------------------------------------------------------//

//--------------------------CD stuff from Autoexec--------------------------//
c:\sys\smartdrv.exe /l
c:\sys\mscdex /d:recorder /l:f /l:e /m:20 /e /v

set TZ=mesz-1
set pubim=d:\temp
set pubimg=d:\temp

//--------------------------------------------------------------------------//




The zip file contains both GDGEN and CDWRITE software.  We are keeping it in
D:CDR\.  The install program (install.bat) is only coping the .EXE files
into the subdir..so I doubt there is any setup.  The CDWRITE stuffage allways
requires that you tell it what the drive letter of the CDD521 is and the 
commands are issued from the command line ( if there is any error on the 
commnad line .. help about the command is displayed ).  

TESTINST will test the installation of the drivers and will ask if you
want it to burn a track..to which you normally answer 'N'o unless you have 
a screwed blank already in there!.

 


...Hope this helps...

Laterz,
   Waysted

