 Diskette:   IDE Format Utilities
 Part #:     DK0039 ( 3.5" diskette )
             DK0040 ( 5.25" diskette )
 Release:    1.05
 Date:       November 25, 1991
 Volume:     IDEFMT_UTIL

                             Contents of Diskette
      
      File             Size      Date       Time        Version

      IDEFMT.EXE       15888     11-25-91   1:03a       1.03
      PROSET.EXE       10205      8-29-91   2:02a       2.02
      DSKMETER.EXE     21013      9-06-91   1:50a       1.50
      RELOCIDE.SYS       395      5-08-91   1:00a       1.00
      README            2683     11-15-91
      README.EXE       21046     12-03-90   1:00a       1.00



                                  Description
      

      IDEFMT.EXE   - Procom Technology's low level format utility.
                     WARNING: Using IDEFMT will erase all information on your 
                     hard disk.


      PROSET.EXE   - Procom Technology's IDE setup utility.  This utility
                     allows you to set the system's drives type stored in 
                     the CMOS battery backed RAM.  This may be used in place 
                     of your system's setup utility for quicker installation,
                     however, PROSET may not be able to calculate a proper 
                     checksum in some computer systems.  PROSET will check 
                     this first before it makes any changes to your CMOS RAM 
                     configuration.

      DSKMETER.EXE - Procom Technology's hard disk benchmark utility.
                     Gives an accurate measure of the data transfer rates 
                     and access times of the hard drives in your machine.

      RELOCIDE.SYS - This utility is used to relocate IDE drive parameters
                     from the shared RAM on the AT-IDE adapter card to
                     lower RAM below 640K.  This is useful only in 80386
                     and 80486 systems that use a memory manager to fill
                     the area between 640K and 1MB with available RAM.  To
                     do this, the drive type for the IDE drive must be set
                     to 2 if the BIOS is enabled.  The utility is then 
                     loaded from the CONFIG.SYS file before the memory
                     manager is loaded.

      README       - This is the file you are reading.

      README.EXE   - Types the README file on your screen with forward and
                     backward scrolling functions.
