Installation Utility for

Novell Patches and Upgrades



Note: the patches and updates MUST be installed - 

if they are not, Legato CANNOT guarantee that

NetWorker will load and run properly. 



1. Summary

Legato NetWorker, like Novell NetWare, is designed to provide
the highest possible performance and reliability. Since
NetWorker utilizes NetWare's capabilities so intensively, it is
imperative that the NetWare operating system be as robust as
possible. For this reason, Legato has licensed from Novell the
latest NetWare update files. These files are provided on the
diskettes labeled "NetWare Patches and Updates". These patches
and updates consist of new SMS and related NLMs for both 3.11
and 3.12; and a set of patch NLMs for NetWare 3.11. Disk #1 also
contains an installation program, NOVLINST.NLM, which automates
most of the steps required to properly install the NetWare
patches and updates. This document describes the NOVLINST
procedure; it assumes that you know how to load and unload NLMs
from the NetWare server console, and how to edit the NetWare
AUTOEXEC.NCF file. If you are not familar with these operations,
you should consult your NetWare manuals for further information
before proceeding. 



NetWorker 2.20 for NetWare requires two installations. You must
first install the necessary patches and upgrades from Novell.
Then install the NetWorker Server and/or Client software.  The
first  installation is called: NOVLINST.NLM.  The second
installation is called: NWINST.NLM.  The setup is very easy for
NOVLINST. If you want to accept the default settings, just press
the ENTER key at each of the prompt to proceed.



NOTES:

If you are installing on a NetWare 3.12 system, it will NOT
require that you use the FATFIX patch and VREPAIR, so you can
ignore these items.

In some cases, NOVINST may not be able to get EDIT.NLM to
automatically load with the AUTOEXEC.NCF file. If this happens,
simply type in SYS:SYSTEM/AUTOEXEC.NCF in the prompt box, and
you can continue normally.

In some cases, NOVINST may not be able to properly enter the SET
TIME ZONE command in the AUTOEXEC.NCF file. Double check this
item, since it is important that the SET TIME ZONE command
appear BEFORE CLIB is loaded.



2. Installation:

NOVLINST copies the files into SYS:SYSTEM (unless otherwise
noted), depending on the NetWare OS version. NetWare 3.11
requires the patches and the SMS files; NetWare 3.12 requires
only the SMS files. At the server's console screen, enter:	

	LOAD A:NOVLINST	(assuming the diskette is in drive A)

NOVINST will display an introductory screen and a prompt.
Pressing return will start copying files to the system. File
names are shown in the window. If the files in your system have
the same or newer version, they will not be overwritten by the
version on the floppy.  Certain DOS executables and text files
will be copied regardless of the version you have. During the
upgrade process, when this utility encounters a duplicate system
file on your server, it saves the original in a new directory
which it creates, SYS:SYSTEM.ORG. If for any reason you want to
restore these original system files to your system, erase the
ones installed with this utility, and copy the files from
SYS:SYSTEM.ORG to their original locations. This utility will
never overwrite any original files without first saving it to
SYS:SYSTEM.ORG. The total disk space needed to save the original
system files is about 1.3 megabytes.



Watch for messages about the NetWare patch FATFIX during the
installation process.  If any message reports that the FATFIX
patch is not in the system, not up-to-date, or not loaded, you
should dismount all mounted volumes by using the DISMOUNT
command at the system console (you can determine the mounted
volumes by using the VOLUMES command at the same prompt). Once
all the volumes are dismounted run VREPAIR on each volume and
then reboot your server. 

	IF YOU DO NOT FOLLOW THESE STEPS, YOU MAY LOSE DATA! 

We also recommend that you reboot your server if any other
patches or upgrades are installed.



It is strongly recommended that you simply run NOVLINST before
installing NetWorker. However, if you prefer to manually install
the patches and upgrades, you MUST make sure that the files
listed in Section 4 Modifying AUTOEXEC.NCF are copied to your
system.



3. Contents:

contents of disk #1:

IDENT   .TXT (not copied)

README  .TXT (not copied)

311PTD  .DOC (not copied)

NOVLINST.HLP (not copied)

NOVLINST.NLM (not copied)

TSA_OS2 .EXE (copied to sys:public)

TSA_OS2 .HLP (copied to sys:public) 

TSA_RC  .DLL (copied to sys:public)   

TSA_SMS .COM (copied to sys:public)

SDI     .NLM (copied to sys:system)     



Directory of  \3_11_00

NOTE: If you are running NOVLINST on a NetWare 3.11 system,
these files are copied to sys:system

IPXS    .NLM   

CLIB    .NLM   

SPXS    .NLM  

STREAMS .NLM

TCPIP   .NLM    

TLI     .NLM     

SMDR31X .NLM 

TSA311  .NLM    

TSA_DOS .NLM 

WS_MAN  .NLM 

FATFIX  .NLM     

HTFXFX  .NLM      

NCOMFIX .NLM    

PATCHMAN.NLM 

VREPAIR .NLM     

BIGRFIX .NLM      

GVIWHFIX.NLM    

MKDIRFIX.NLM     

XMDFIX  .NLM      

SPXLISFX.NLM    

SPXFIX2 .NLM      

SPXFSFIX.NLM    

AFTER311.NLM   



Directory of  \3_12_00

NOTE: If you are running NOVLINST on a NetWare 3.12 system,
these files are copied to sys:system

AFTER311.NLM  





contents of disk #2:

IDENT   .TXT  



Directory of  \3_12_00

NOTE: If you are running NOVLINST on a NetWare 3.12 system,
these files are copied to sys:system

CLIB    .NLM    

SMDR31X .NLM 

TSA312  .NLM    

TSA_DOS .NLM    

WS_MAN  .NLM    



Directory of \4_01_00

NOTE: If you are running NOVLINST on a NetWare 4.01 system,
these files are copied to sys:system

SMDR    .NLM     

TSA400  .NLM    

TSANDS  .NLM  

TSA_OS2 .NLM 

TSA_DOS .NLM

WS_MAN  .NLM



4. Modify AUTOEXEC.NCF:

Any line containing these strings (case insensitive): SMDR, TSA,
SHIM, AFTER311, SPXFIX1, NWSTART and PATCHIT,	will be commented
out with a line header "#%". For example: 

	#%patchit	

If  installing on a NetWare 3.11 system, these lines will be
inserted right after the line IPX INTERNAL NET xxx:



##BeGiN## NetWare NLMs required by NetWorker ###	

load fatfix		

load bigrfix		

load gviwhfix		

load mkdirfix		

load xmdfix		

load streams		

load clib		

load tli		

load ipxs		

load spxs		

load after311		

load spxfix2		

load spxfsfix		

load spxlisfx		

load tsa311      

##EnD## NetWare NLMs required by NetWorker ###	



If  installing on a NetWare 3.11 system, these lines will be
inserted right after the line IPX INTERNAL NET xxx:



##BeGiN## NetWare NLMs required by NetWorker ###	

load streams		

load clib		

load tli		

load ipxs		

load spxs		

load tsa312      

##EnD## NetWare NLMs required by NetWorker ###	



IMPORTANT:	If  you are installing on a NetWare 3.11, we urge you
to read the Novell 311PTD.DOC file on the diskette "NetWare
Patches and Upgrades" carefully. Having up-to-date NetWare
patches and upgrades not only ensures reliable operation of
NetWorker, but also prevents your NetWare file server from
possible ABENDS and file system corruption problems.



At this time, NOVLINST does NOT support installing on a NetWare
4.0x system. 



Do NOT change the order or syntax of these load commands!.  Do
NOT change the beginning and ending mark of these load commands!.



If you choose to let this installation modify your AUTOEXEC.NCF,
an extra message will be displayed:		

	Do you want to load the editor to review changes in
AUTOEXEC.NCF?	



After you type Y, the NetWare system editor will be loaded with
AUTOEXEC.NCF so that you can review the AUTOEXEC.NCF file.	In
some cases you might see a NetWare system error: "Invalid
NetWare file path."  Simply type in: SYS:SYSTEM/AUTOEXEC.NCF in
the prompt box, and you can continue normally.




