KABcam Version 1.0 Release Notes
================================
* KABcam
* Copyright (c) 1998, Keith Bingham. All rights reserved.

* The use and redistribution of this software is subject to the
  conditions set forth in the license agreement document 
  (LICENSE.TXT) included with this distribution.


Contents
========
1. Introduction to KABcam
2. Multiple Capture Devices
3. Image Formats
4. Uninstalling KABcam
5. Contact Information


1. Show your world to the web with KABcam!
==========================================
Welcome to KABcam. The KABcam software will let you publish up 
to the minute pictures on your webpage. All you need is a windows 
compatible camera or capture device and a website that is 
accessible via FTP.

Please read the help file for instructions on using KABcam.


2. Multiple Capture Devices
===========================
By default KABcam will use the first capture device installed on your 
computer. If you have more than one capture device you can configure
KABcam to use one of these other devices. 

1. Open Control Panel, then Multimedia and click on the Devices tab.
2. Expand the Video Capture Devices line.
3. Locate the device you want to use. The first device is 0 the second
   is 1, third is 2 and so on.
4. Use Notepad to open the KABCAM.INI file in your WINDOWS directory.
5. Under the [ImageFormat] heading add the following line, replacing x with
   the number of the device you want to use.

	CaptureDevice=x

6. Save the KABCAM.INI file.

The next time you run KABcam it will use the specified capture device.


3. Image Formats
================
KABcam supports 4, 8, 16, 24 and 32 bit greyscale and color capture images. 
The image created by KABcam is always a 24 bit color image.

Some capture devices support other types of image formats. KABcam may not
problerly handle some of these formats. One format known to cause problems
is the 15 bit RGB format availible with the Brooktree BT848 Capture Driver.


4. Uninstalling KABcam
======================
KABcam will install an Uninstall Icon to make removing KABcam 
a snap. Before uninstalling, make sure the "Run when windows starts" option 
under the General tab in setup is unchecked.


5. Contact Information
======================
Email
  General Information: info@kabsoftware.com
  Technical Support: support@kabsoftware.com
  Registration Information: register@kabsoftware.com

World Wide Web
  http://www.kabsoftware.com
