Installing the single user version:

1. Run SETUP.EXE, when asked choose either "Single User (Install Sample Data
   Files)" or "Single User (Install New Data Files)".
2. When Setup has finished, go to the directory where you installed to and
   run REGIT.EXE to properly configure the program. You don't have to do
   anything in the program yet, just run it and quit.
3. Now run IDCREATE.EXE from the same directory, and enter this password:

       3972-API-4609

4. You should now get a message telling you that the full version has been
   installed. If you get the message "Network Path Not Identified -- Please
   run IDCreate on the server", you probably skipped #2. So go back there
   and run REGIT.EXE (this will apparently force the program into a "local
   server" mode).


Installing the network server:

1. Run SETUP.EXE, when asked choose either "Network Server (Install Sample
   Data Files)" or "Network Server (Install New Data Files)".
2. When Setup has finished, go to the directory where you installed to and
   run NETSET.EXE. You should see two options, select "Server".
3. Now run IDCREATE.EXE from the same directory, and enter this password:

       2804-NET-1513

4. You should now get a message telling you that the full version has been
   installed. If you get the message "Network Path Not Identified -- Please
   run IDCreate on the server", you probably skipped #2 or did something
   wrong there. So go back, run NETSET.EXE and select "Server".


Installing the network station (you must first install the server somewhere):

1. Run SETUP.EXE, when asked choose "Network Station (No Data Files
   Installed)".
2. When Setup has finished, go to the directory where you installed to and
   run NETSET.EXE. You should see two options, select "Station". Next,
   select "Identify Path To Server" and locate the directory on the server
   with the NET.ID file.
3. If you did everything correctly, the program should now be registered
   (only the server needs to be registered separately). If not, then go
   back to #2 and repeat the process.
