Form Packs

========
INSTALLING FORM PACKS

You will need to install Windows Form Packs using the following steps:

1.  Place the first Form Pack diskette in your disk drive.

2.  From the Windows Program Manager, select File | Run, type B:\SETUP, and     
    press <Enter>. (If you are using a different disk drive, substitute 
    that drive letter in place of the "B") 

3.  Follow the direction on the screen. 


If you need instructions on using predesigned forms, please refer 
to your FormTool User Guide. 

JOIN OUR FORMS DESIGN TEAM! We're interested in the forms you use. 
If you have forms that you feel should be included in one of our 
form packs, send them to IMSI and let us take a look at them. If 
we use an original form of yours, we will credit you with creating 
it.

GENERAL INFORMATION

Due to the differences in system configurations such as monitors 
(resolution) and printers (margins, fonts supported), some users
will need to do occasional editing of forms to make them display
and print properly on their particular configuration.

PRINTERS
Some of the forms in the Form Pack have come from Rapidforms, our 
forms printing partner. You can identify these forms by the 
Rapidforms logo in the top left corner. These forms are, for the 
most part, designed with .25" margins. Because each printer has 
it's own internal margin settings it may be necessary to move the
entire contents of the form to fit within margins both your printer
and any bulk, pre-printed Rapidforms can handle. You can move a form through
the FormDesign module by using the Group move option.  If you need 
help performing this task see your FormTool User Guide. 

END OF TEXT
