------------------------------------------------------------------
Delrina WinFax PRO      README (Networks) Notes    August 22, 1994
for Networks 4.0
==================================================================

The following information reflects changes made since the Delrina
WinFax PRO for Networks Setup Guide and User's Guide went to press, 
and should be reviewed prior to running WinFax PRO for Networks. 

Also review the README file for the main WinFax program for 
information that has changed since the Delrina WinFax PRO User's 
Guide went to press.

Where applicable, these notes refer to specific sections in the 
appropriate manual.

WinFax online help can provide you with detailed information when 
you need it most -- while you are using WinFax. To get help from 
any dialog or window in WinFax, press F1.


Windows for Workgroups 3.11 Users
---------------------------------
If you have disk or printer sharing active in Windows for
Workgroups, and your computer is configured for a Class1 or
Class2 fax/modem, you may experience an occasional pause. 
The pause can impact the reliability of faxing. To ensure 
that WinFax PRO for Networks can fax reliably, either:

  (a)  Turn off your disk and printer sharing options in
       Windows for Workgroups. To access the Sharing menu,
       select Network Setup from the Network Group. Click 
       the Sharing button and the following dialog appears:
 
            "I want to be able to give others access
            to my files"
        
            "I want to be able to allow others to print
	    to my printer(s)"

       Disable both Sharing options by placing your cursor
       in the check box on the left and click to remove the "X".               

OR;

  (b)  Move the fax/modem(s) to another system which is not
       configured to share disk or printer services in
       Windows for Workgroups.


Switching to Standalone Mode
(User's Guide 3-11 to 3-14)
----------------------------
Before switching to standalone mode, ensure that there are
no events in progress in your Outbox. Events on hold, 
pending or scheduled are considered events in progress. 

If you switch to standalone mode while events are in
progress, you may experience problems sending the event.



Comma pause time and credit card dial strings
Setup Guide, page 6-10
---------------------------------------------
The default comma pause time in WinFax PRO for Networks 4.0 is
2 seconds, and you cannot modify this value from within the
Configuration program. During installation, the WinFax Setup
program will detect if you have set a comma pause time value 
of greater than 2 in a previous version of WinFax. If detected,
any existing credit card dial strings will be automatically
supplemented with additional commas up to what the Credit Card
Number field will acommodate within its 20-character limit. 
Each comma in the dial string will be replaced with the 
appropriate number of additional commas (rounding up).

For example, if the comma pause time was set to 3 seconds in
WinFax PRO for Networks 3.0, a credit card string of ...

82,,123456

... would change to ...

82,,,,123456

If you have used commas for pauses in dial prefixes or phone
numbers in any phonebook records, you must adjust those 
individually after installing WinFax PRO for Networks 4.0.


Installing or Changing your WinFax PRO for Networks DOS
Server Setup (Setup Guide 5-28 to 5-31 and 6-23 to 6-24)
--------------------------------------------------------
You cannot install or change the setup of a WinFax PRO for
Networks DOS Server if CAS fax/modem TSRs are loaded and
active.

The SETUPDOS program terminates when CAS fax/modems TSRs
are active.


