@@000
 Peachtree Complete Accounting

@@001
Peachtree Software proudly introduces Peachtree Complete Accounting. 
Working with Peachtree Complete Accounting is easy.

The first step is to load Peachtree Complete Accounting onto your hard 
disk drive. You may load all modules or any combination including 
sample data files. You can always load other modules later.  PTLOAD 
allows you to make your selections one time and it does the rest. The 
files on the Distribution Disks are stored in a special compressed form. 
PTLOAD knows which disks are needed for the modules you have selected 
and it unpacks and copies the files in the most efficient manner.  This 
process takes a few minutes depending on your selections but PTLOAD will
keep you informed on the status of the process. You will be asked to 
insert each disk as needed to continue with the loading. 

Now you are on your way to making Peachtree Complete Accounting work for 
you! 

Press 'ENTER' to continue: 
@@002
Enter 'Y' if your system has a color monitor and 'N' if your system has any other type of monitor.
@@003
A PATHNAME tells the system where to look on the disk to find your program or data files. A PATHNAME consists of the drive, (for example C:), optionally followed by the names of the subdirectories in which the files are located. Subdirectories consist of a backslash (\) followed by from 1 to 8 characters followed by another backslash.
~
In Peachtree Complete Accounting a pathname can be up to 22 characters long. For example, to put your programs in a subdirectory called PCA on drive C, you would type C:\PCA\. You may specify your existing Peachtree Complete directory or create a new directory. See your DOS manual for more information on directories and paths.
@@004
Enter the Serial Number of your Peachtree Complete Accounting package. The serial number can be found on your Peachtree Complete Accounting diskettes. 
~
You must enter a serial number.
@@005
Enter the Name of the owner of the Peachtree Complete Accounting package.
~
You must enter a name.
@@006
At the selection prompt:
~
     a) Enter 'Y' if you want to install the selection.
~
     b) Enter 'N' if you do not want to install the 
           selection at this time.
~        NOTE: If installing an update, all modules 
            currently installed must be loaded.
~
     c) Use the 'TAB' or 'DOWN ARROW' key to go to 
            the next field.  Use the 'UP ARROW' key to 
            go to the previous field.
~
     d) To abort the installation, use the 'TAB',
              'DOWN ARROW', or 'UP ARROW' key to move
                to the first selection and then press the
              Escape key.
~
        NOTE: At least one selection must be chosen.
@@007
At the selection prompt:
~
     a) Enter 'Y' to accept the above selections.
~
     b) Enter 'N' if you want to change the selections.
@@008
At the selection prompt:
~
     a) Enter 'Y' to accept the Serial Number and Name entries.
~
     b) Enter 'N' if you want to change the selections.
@@009
If you are upgrading from Peachtree Complete III or installing Peachtree Complete Accounting for the first time, enter Y at this prompt. Otherwise, if you have already installed Peachtree Complete Accounting, and are merely updating your programs, enter N.
@@010
At the selection prompt:
~
     a) Enter 'Y' to upgrade to Peachtree Complete Accounting. This is the recommended response.
~
     b) Enter 'N' to specify a different directory to load your new Peachtree Complete Accounting into.
~
     c) Press Escape to abort the installation.
@@011
At the selection prompt:
~
     a) Enter 'Y' if you want to install the sample         data.
~
     b) Enter 'N' if you do not want to install the         sample data at this time.
@@012
At the selection prompt:
~
     a) Enter 'Y' if you want to continue with the installation of the sample data.
~
     b) Enter 'N' if you do not want to continue with the installation of the sample data at this time.
@@013
At the selection prompt:
~
    a) Enter 'Y' to set up Peachtree Complete Accounting to use your current data files.
~
    b) Enter 'N' if you do not wish to set up Peachtree Complete Accounting to use your current data files at this time. Please refer to the accompanying documentation for more details.
~
    c) Press Escape to abort the installation.
@@014
A PATHNAME tells the system where to look on the disk to find your program or data files. A PATHNAME consists of the drive, (for example C:), optionally followed by the names of the subdirectories in which the files are located. Subdirectories consist of a backslash (\) followed by from 1 to 8 characters followed by another backslash. 
~
In Peachtree Complete Accounting a pathname can be up to 22 characters long. See your DOS manual for more information on directories and paths.
@@015
At the selection prompt:
~
    a) Enter 'Y' if you already have Peachtree Complete installed in another directory.
~
    b) Enter 'N' if you do not have Peachtree Complete installed in another directory.
~
    c) Press Escape to abort the installation.
