; IBM 5853 2400 bps Modem
; ATI0=123/ATI1=6F

;=============================================================
; Last revision date: 02/18/93 (update this date
; each time you edit; it is also advisable to rename
; your edited file [use Save As, rather than Save 
; option] to avoid later confusion and to keep the 
; original .MDM file intact).

; NOTE: Refer to the file TEMPLATE.MDM (A Sample Modem 
; Command File) for a description of modem command 
; files and how they work. "A Sample Modem Command 
; File" is user selectable within the Lotus Notes 
; Setup dialog "Modem Type" listbox in which you found 
; this modem command file (see end of listings, 
; beginning with a period) and is a printable ASCII 
; text file (approximately 15 pages). 

; Additional information may be obtained from either of 
; the two so-called "generic" modem command files 
; (alphabetically listed under letter G, designed for 
; use with Notes Releases 2.x and 3.x, 9600 bps and 
; 14400 bps maximum, respectively), each of which may 
; first be tried as-is with unlisted modems, then edited 
; if required (within the Notes edit box, or outside of 
; Notes, with any text editor) according to the printed 
; instructions within each file, and in compliance with 
; the vendor's command set, result codes, DIP switch 
; settings, and technical specifications as listed in 
; the equipment's users manual.

; For the specific modem(s) listed under this heading:
;===============================================================

; NOTE: Commands listed below are are AT commands only.  
; For IBM extended commands and settings, refer to the 
; user's Guide to Operations.
  
; Front panel switch settings for connect with 
; Error Correction protocol: 

; ECL button latched (in); all others unlatched (out).
; Front panel switch settings for connect with 
; no Error Correction protocol:

; All buttons unlatched (out).

; Eight rear switch settings: 1, 4, 6 up (on)
; all others down (off).

[attributes]

MODELS=IBM 5853 2400 bps Modem
NULL MODEM=0
MAXIMUM SPEED=2400
DEFAULT SPEED=2400

[commands]

ESCAPE=+++
ATTENTION=ATE0V1
HANGUP=ATH0
SETUP=ATZ
SETUP=ATE0V1
SETUP=ATQ0S0=0S7=60X1
VOLUME OFF=ATM0
VOLUME LOW=ATM1
VOLUME MEDIUM=ATM1
VOLUME HIGH=ATM1
ANSWER=ATA
MANUAL DIAL=ATX1S9=1D
AUTO DIAL SETUP=ATS9=6
AUTO PULSE DIAL=ATDP
AUTO TONE DIAL=ATDT
AUTO DIAL SUFFIX=,

[responses]

OK=OK

RING=RING

NO CARRIER=NO CARRIER

ERROR=ERROR

NO DIALTONE=NO DIALTONE
NO DIALTONE=NO DIAL TONE

;BUSY=BUSY--not an option via AT commands on this modem.

;NO ANSWER=NO ANSWER--not an option via AT commands on this modem.

CONNECT, 2400,2400=CONNECT 2400/ECL
CONNECT, 2400,2400=CONNECT 2400

CONNECT, 2400,1200=CONNECT 1200/ECL
CONNECT, 2400,1200=CONNECT 1200


