                                  Welcome to
                     Gabriel Knight - Sins of the Fathers


This is the readme file for Gabriel Knight.
This file contains the absolutely latest and greatest 
information about this version of the game. To print this file, 
enter the directory you installed the game to and type "PRINT 
README."


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
FROM THE GABRIEL KNIGHT TEAM

Thank you for purchasing this game.  We hope you find GK as 
hair raising to play as it was to make. We would love to  
hear your comments, please write us.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WINDOWS SOUND

The Windows install will ask you if you want to install for 
BASE or EXTENDED level sound.  
	
BASE level sound runs on channels 13 thru 16 and is used
for sound cards like SoundBlaster, ProAudio, Adlib, or 
any FM Yamaha 3812 type card.  
EXTENDED level sound runs on channels 1 thru 10 and is 
used for cards like the LAPC-I, MT-32, SCC-1, Sound
Canvas, Turtle Beach MultiSound, or any General MIDI
device. 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WINDOWS AGAIN

If you decide to play under Windows and have a 4 MEG machine,
you should use a swap file.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
TIPS FOR FASTER LOADING

If you notice the game or opening cartoon running slowly, it 
may be due to a fragmented hard drive.  There are many 
commercial and shareware hard drive unfragmenting 
programs available.  Also, the game can be sped up if you
load audnone.drv from the install.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PRO AUDIO USERS

If you are using a Pro AudioSpectrum 16 and 
experience problems during the game, rerun the INSTALL 
utility and select "Sound Blaster" as your audio device.

Selecting "Sound Blaster" will utilize the PAS card's 
built-in Sound Blaster emulation for digitized audio effects.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MT32 USERS

We recommend that you use mt32.drv instead of of genmidi.drv
Its good sound advice.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ADLIB USERS

If you have problems with adl.drv, try the secondary driver
called sadl.drv.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
STATIC MEMORY

If you are receiving the message "x number of bytes can't be
allocated" add the line STATICMEMORY = 250K to resource.cfg   
on your hard drive.  The default is 200K so if 250K doesn't 
do the trick, increase it again.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SAVE GAMES

If you change the drivers that you use, the games saved under
your previous configuration will be invalid under your new
configuration.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MORE INFO

If your audio is not playing correctly, try rebooting your 
computer. You can clear a sequence of messages by right 
clicking your mouse.  But, beware, you may be missing
valuable clues.  We recommend this only if you have already
read a sequence of messages.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SIERRA ON-LINE MANUAL BOOT DISK INSTRUCTIONS

The following instructions can be used if the automatic boot disk maker 
included in the install program does not function properly on your system.
If you have the CD-ROM version of this program, or you are using certain 
hard drive compression utilities, you will need to add any necessary
driver lines to your config.sys and autoexec.bat files.  

FORMATTING THE DISK

PLEASE NOTE: It is necessary to format the disk even if the disk is already 
formatted.  The /S switch will transfer files to the boot disk which are 
necessary for the disk to work correctly.

To make a  CD-ROM Boot Disk, format a high density diskette in the A: drive.  
(Use /F:360 or  /F:720 parameter if using a low density diskette) Note: This 
will not work in the B: drive.  Type the command as follows:  

	FORMAT  A:/S  <Enter>

If after entering this command the system responds with a "Bad command or
file name" error, then type:

	PATH=C:\DOS  <ENTER>

Now retype the FORMAT command above.  If you still receive the same error,
the MS DOS FORMAT command may not be on your system or it may have been 
renamed.  Programs such as PC Tools and Norton Disk Utilities can rename 
the format command to prevent accidental loss of data. 


LOCATING THE MOUSE DRIVERS

If you plan to use a mouse with your game, it will be necessary to first 
load the mouse driver.  To do this, locate the mouse driver and copy it to 
the boot disk in your A: drive.  There are two types of mouse drivers 
available, MOUSE.SYS, which must be loaded in the CONFIG.SYS file and 
MOUSE.COM which must be loaded in the AUTOEXEC.BAT file.  You do not need 
to load both MOUSE.SYS and MOUSE.COM.  Locate the MOUSE.SYS or MOUSE.COM 
file.  Because the file MOUSE.SYS is usually smaller than MOUSE.COM we 
recommend that the MOUSE.SYS file be used in order to free more memory.

a) Locating the mouse drivers:
If you do not know where the MOUSE.SYS or MOUSE.COM files are located on 
your system, and you have MS-DOS 5.0 or above, the command below should help 
in locating your mouse drivers.  Type the following at the C:\> prompt.

	DIR  \MOUSE  /S  <ENTER>

This command only works with MS-DOS 5.0 or above and will cause the system 
to search all sub directories for a file called mouse.  If the system locates
a file called mouse, it will display the path where the mouse files are 
located.  For instance, if the MOUSE.SYS file is located in a C:\MOUSE> 
directory, the system will display:


Directory of C:\MOUSE
	MOUSE    SYS     55160 03-10-92   3:10a
	MOUSE    COM     56408 03-10-93   6:00a

If the system does not locate a mouse, your driver may have a different name 
or these files may not be currently installed on the system.  Some other 
common names for mouse drivers are IMOUSE, GMOUSE, and HPMOUSE.  Your mouse 
drivers may have been included on a floppy disk which came packaged along 
with your mouse.  For information on the proper name for your mouse, check the 
owner's manual which came with your mouse.  

b) Copying the mouse driver:
Once you have located the mouse driver, you will need to copy it to the boot 
disk.  In this step, we will assume that the mouse drivers were located in 
the C:\MOUSE> directory as shown in the step above.  To copy the MOUSE.SYS 
file to the boot disk, type the following at the C:\> prompt:

	COPY  C:\MOUSE\MOUSE.*  A:  <ENTER>

Please substitute the appropriate path and file name for your mouse driver in 
the command line above.  You should then see a message indicating some files 
were copied.


CREATING THE CONFIG.SYS FILE

Now switch to the A: and type the following:

	COPY  CON  CONFIG.SYS <Enter> (The cursor will drop down one line and 
blink)
	FILES=50  <Enter>
	BUFFERS=30 <Enter>

If you are using the MOUSE.SYS file to load your mouse, add the following 
line to the CONFIG.SYS.

	DEVICE=MOUSE.SYS  <Enter>

Complete the file by pressing the  F6  Function key <Enter>



CREATING THE AUTOEXEC.BAT FILE

Now create an AUTOEXEC.BAT file on the A: drive by typing:

	COPY  CON  AUTOEXEC.BAT   <Enter> (the cursor will drop down one line)
	SET  COMSPEC=C:\COMMAND.COM  <Enter>
	PROMPT  $P$G  <Enter>
	PATH=C:\DOS <Enter> 

If you are using the MOUSE.COM file to load the mouse, add the following 
line to the AUTOEXEC.BAT file.

	MOUSE.COM  <Enter>

Complete the file by pressing the  F6  Function key <Enter>

Now you are ready to use your new Sierra Boot Disk.  Place the boot disk in 
your A: drive and press the <CTRL> <ALT> and <DEL> keys at the same time.  
Your computer will reboot and you will be ready to start your Sierra game 
as you normally would.

-----------------------------------------------------

If you are interested in future adventure games or any other of 
the Sierra family of fine software products, call us at
(800) 326-6654 [or (209) 683-4468 outside the United States].


>>>>>> TECHNICAL HELP <<<<<<

Please refer to the technical help section in your Sierra
game manual.

If you still have a problem, call or fax Sierra Technical Support
   Tel:  (209) 683-8989 
   Fax:  (209) 683-3633
   Mail: (See address in Sierra Game Manual) In the U.K. call 
or fax our Sierra Techincal Support Department 
   Tel:(44)734-303-171
   Fax:(44)734-303-201
   Mail: (See address in Sierra Game Manual)


You can also reach the Technical Support Department on the following services:

	Sierra BBS............ (209) 683-4463 (Settings 8,N,1 & up to 9600 bps)
	Compuserve............ GAMAPUB (Technical Support ID 76004,2143)
	PRODIGY............... Technical Support ID WBWW55A
	GEnie................. Private E-Mail SIERRA.SUP
	America Online........ Keyword: SIERRA


















































Hi Mom!!!
