*****************************************************************
*                Hornet: Naval Strike Fighter                   *
*                        Version 1.0                            *
*                          12/20/93                             *
*****************************************************************
 
Overview
--------
This file lists features and other items that are not mentioned
in the documentation. In addition, it contains instructions for
manually installing Hornet in case the installer fails.

At the end of this file are instructions explaining how to use
Hornet Disks 1 and 2 to update MiG-29 or Falcon 3.0 to the
latest versions for communications compatibility. You are
encouraged to distribute copies of Disks 1 and 2 to other 
Falcon 3.0 and MiG-29 owners in order to update for
communications compatibility. Please do not distribute Disk 3.

When you install Hornet, it automatically updates your copies of
Falcon 3.0 or MiG-29 to the latest versions. If you have
installed Hornet, you do not need to update; you already have the
latest versions of Falcon 3.0 and/or MiG-29.

After you install Hornet or update Falcon 3.0 or MiG-29, there
will be two more Read Me files in your FALCON3 or MIG29 
directory. These files, F3README.TXT and MGREADME.TXT, contain
information on program fixes and features in the new versions of
Falcon 3.0 and MiG-29 respectively.

Undocumented items
------------------
* In a communications session, the zoom to target function can
  cause some machines to lock up (especially when using machines 
  with widely varying processor speeds) and should, therefore, 
  not be used.

* In a communications session, the lock/launch warning tone may
  cut out even though you are still locked up by a missile. Check
  your RWR. If a small box (a missile) is still in the inner
  circle, it is still locked on.
 
* SEA mode radar will only detect your carrier when you are more
  than 3-4 miles away.

* If you switch from Sound Blaster to Roland from the System
  Setup screen, you may have to exit to DOS and restart the game
  to get the full effect of the new setting.

* Due to technical limitations, a full carrier task force (with
  all attendant escort ships and CAP aircraft) could not be
  modeled. Instead, the carrier was made invulnerable, since in
  modern warfare, today's carriers are essentially invulnerable
  due to the protection of a large task force and modern
  defensive technology.

* If you are in a modem campaign game and you have problems controlling
  the plane, try altering the EMM386 line in your CONFIG.SYS file. You
  will need to change it from "DEVICE=C:\DOS\EMM386.EXE 1024 RAM
  FRAME=E000 I=CE00-EFFF" to "DEVICE=C:\DOS\EMM386.EXE 1024 RAM". In
  other words, delete "FRAME=E000 I=CE00-EFF".

* The KTAS label in the padlock status window is mislabeled.  The 
  airspeed being shown is KIAS (Knots Indicated Airspeed).

Special note for Tseng owners
------------------------------
 If you have a video card with the Tseng ET4000/w32 chipset, you
 may experience problems with frequent white flashing in the
 simulation.  You can download a specific fix for this video
 problem from our Customer Support BBS at (510)522-8909 or from
 GEnie, CompuServe or America Online.
 
Finding Spectrum HoloByte Online
---------------------------------
 America Online: Press Ctrl-K for "Go to Keyword." Then type
   "SPECTRUM" in the Keyword window. You can also send e-mail to
   us at S HOLOBYTE.
 
 CompuServe: Type "GO GAMBPUB" at any ! prompt. Then select
   "Section 3" for Spectrum HoloByte. You can also send us
   e-mail at 76004,2144
 
 GEnie: Type "M805;1" at any ? prompt. Then select "Category 18"
   for Spectrum HoloByte. You can also send us e-mail at
   HOLOBYTE.
 
 Internet: Send us e-mail at 76004.2144@compuserve.com.
 
 Prodigy: Check the "Flight Simulators" topic on the Game Club
   bulletin board (located in the Game Center area). You can also
   send us e-mail at TKNJ33A.

MANUALLY INSTALLING HORNET
--------------------------
Should the install program fail, you can try one of the following 
manual installation methods. Follow the instructions appropriate 
to your setup, as different files are needed depending on what is 
already installed on your system.

These instructions assume your hard drive is drive C, your floppy
drive is drive A and you have installed your game to the FALCON3
directory (or MIG29 directory for the MiG-29 Stand-Alone).

ONLY use these instructions if the automatic installer (INSTALL)
does not work!

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ WARNING FOR MIG-29 ADD-ON OWNERS: Hornet cannot install if you    +
+ have version 1.01 of MiG-29. Type "CHECKVER" at the DOS prompt    +
+ in the directory containing MiG-29. If you have version 1.0 or    +
+ 1.01.1, there is no problem. Hornet will install normally. If it  +
+ says you have version 1.01, you must do the following before      +
+ installing Hornet:                                                +
+                                                                   +
+ 1) Insert Disk 1 of the MiG-29 add-on in drive A.                 +
+ 2) At the A: prompt, type the following:                          +
+      COPY GOPATCH.EXE C:\FALCON3                                  +
+ 3) Insert Disk 3 of MiG-29 add-on in drive A.                     +
+ 4) At the A: prompt, type the following:                          +
+      COPY MIGPAT1.RTP C:\FALCON3                                  +
+      C:                                                           +
+      CD\FALCON3                                                   +
+ 5) You will now be at a C:\FALCON3 prompt. Type the following to  + 
+    revert to MiG-29:                                              +
+      GOPATCH /FILE:MIG29.EXE MIGPAT1.RTP                          +
+ 6) You are now ready to install Hornet. Remove the MiG-29         +
+    installer files from your hard drive by typing the following:  +                
+      DEL GOPATCH.EXE                                              +
+      DEL MIGPAT1.RTP                                              +
+ 7) Follow the Hornet installation instructions given below that   +
+    match your setup.                                              +
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Falcon 3.0, 3.0a, 3.0c or 3.0d ONLY:
------------------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\FALCON3 
      COPY EPATCH.RTP C:\FALCON3 
      COPY REPORT0.RTP C:\FALCON3 
      COPY HORNPAT3.RTP C:\FALCON3 
      COPY GOPATCH.EXE C:\FALCON3\MUSIC 
      COPY GOPATCH.EXE C:\FALCON3\ARMSDATA 
      COPY PATCHARM.RTP C:\FALCON3\ARMSDATA 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY 303PATCH.RTP C:\FALCON3 
      COPY HORNPAT2.RTP C:\FALCON3 
      COPY HORMUSIC.RTP C:\FALCON3\MUSIC 
      COPY 303ARM.RTP C:\FALCON3\ARMSDATA 
5) Insert Disk 3 in drive A.
6) At the A: prompt, type the following:
      COPY HORNPAT1.RTP C:\FALCON3 
      C: 
      CD\FALCON3 
7) You will now be at a C:\FALCON3 prompt. Type the following to
   update to Falcon 3.03:
      GOPATCH EPATCH 
      GOPATCH REPORT0 
      GOPATCH 303PATCH 
      GOPATCH HORNPAT1 
      GOPATCH HORNPAT2 
      GOPATCH HORNPAT3 
      CD MUSIC 
      GOPATCH HORMUSIC 
      CD\FALCON3\ARMSDATA 
      GOPATCH PATCHARM 
      GOPATCH 303ARM 
8) The installation is now complete. Remove the installer files
   from your hard drive by typing the following (you should still
   be in C:\FALCON3\ARMSDATA):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3\MUSIC
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3
      DEL GOPATCH.EXE
      DEL *.RTP
      F30RESET

Falcon 3.0e, 3.02 or 3.02.1 ONLY:
---------------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\FALCON3 
      COPY REPORT0.RTP C:\FALCON3 
      COPY HORNPAT3.RTP C:\FALCON3 
      COPY GOPATCH.EXE C:\FALCON3\MUSIC 
      COPY GOPATCH.EXE C:\FALCON3\ARMSDATA 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY 303PATCH.RTP C:\FALCON3 
      COPY HORNPAT2.RTP C:\FALCON3 
      COPY HORMUSIC.RTP C:\FALCON3\MUSIC 
      COPY 303ARM.RTP C:\FALCON3\ARMSDATA 
5) Insert Disk 3 in drive A.
6) At the A: prompt, type the following:
      COPY HORNPAT1.RTP C:\FALCON3 
      C: 
      CD\FALCON3 
7) You will now be at a C:\FALCON3 prompt. Type the following to
   update to Falcon 3.03:
      GOPATCH REPORT0 
      GOPATCH 303PATCH 
      GOPATCH HORNPAT1 
      GOPATCH HORNPAT2 
      GOPATCH HORNPAT3 
      CD MUSIC 
      GOPATCH HORMUSIC 
      CD\FALCON3\ARMSDATA 
      GOPATCH 303ARM 
8) The installation is now complete. Remove the installer files
   from your hard drive by typing the following (you should still
   be in C:\FALCON3\ARMSDATA):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3\MUSIC
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3
      DEL GOPATCH.EXE
      DEL *.RTP
      F30RESET

Falcon 3.0 with Operation: Fighting Tiger 3.01 ONLY:
----------------------------------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\FALCON3 
      COPY CHECKOFT.RTP C:\FALCON3 
      COPY REPORT1.RTP C:\FALCON3 
      COPY HORNPAT3.RTP C:\FALCON3 
      COPY GOPATCH.EXE C:\FALCON3\MUSIC 
      COPY GOPATCH.EXE C:\FALCON3\ARMSDATA 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY ASIAPAT4.RTP C:\FALCON3 
      COPY ASIAPAT5.RTP C:\FALCON3 
      COPY 303PATCH.RTP C:\FALCON3 
      COPY HORNPAT2.RTP C:\FALCON3 
      COPY HORMUSIC.RTP C:\FALCON3\MUSIC 
      COPY 303ARM.RTP C:\FALCON3\ARMSDATA 
5) Insert Disk 3 in drive A.
6) At the A: prompt, type the following:
      COPY HORNPAT1.RTP C:\FALCON3 
      C: 
      CD\FALCON3 
7) You will now be at a C:\FALCON3 prompt. Type the following to
   update to Falcon 3.03:
      GOPATCH CHECKOFT 
      GOPATCH REPORT1 
      GOPATCH ASIAPAT4 
      GOPATCH ASIAPAT5 
      GOPATCH 303PATCH 
      GOPATCH HORNPAT1 
      GOPATCH HORNPAT2 
      GOPATCH HORNPAT3 
      CD MUSIC 
      GOPATCH HORMUSIC 
      CD\FALCON3\ARMSDATA 
      GOPATCH 303ARM 
8) The installation is now complete. Remove the installer files
   from your hard drive by typing the following (you should still
   be in C:\FALCON3\ARMSDATA):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3\MUSIC
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3
      DEL GOPATCH.EXE
      DEL *.RTP
      F30RESET

Falcon 3.0 with Operation: Fighting Tiger 3.01.1 or later ONLY:
---------------------------------------------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\FALCON3 
      COPY REPORT1.RTP C:\FALCON3 
      COPY HORNPAT3.RTP C:\FALCON3 
      COPY GOPATCH.EXE C:\FALCON3\MUSIC 
      COPY GOPATCH.EXE C:\FALCON3\ARMSDATA 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY ASIAPAT4.RTP C:\FALCON3 
      COPY ASIAPAT5.RTP C:\FALCON3 
      COPY 303PATCH.RTP C:\FALCON3 
      COPY HORNPAT2.RTP C:\FALCON3 
      COPY HORMUSIC.RTP C:\FALCON3\MUSIC 
      COPY 303ARM.RTP C:\FALCON3\ARMSDATA 
5) Insert Disk 3 in drive A.
6) At the A: prompt, type the following:
      COPY HORNPAT1.RTP C:\FALCON3 
      C: 
      CD\FALCON3 
7) You will now be at a C:\FALCON3 prompt. Type the following to
   update to Falcon 3.03:
      GOPATCH REPORT1 
      GOPATCH ASIAPAT4 
      GOPATCH ASIAPAT5 
      GOPATCH 303PATCH 
      GOPATCH HORNPAT1 
      GOPATCH HORNPAT2 
      GOPATCH HORNPAT3 
      CD MUSIC 
      GOPATCH HORMUSIC 
      CD\FALCON3\ARMSDATA 
      GOPATCH 303ARM 
8) The installation is now complete. Remove the installer files
   from your hard drive by typing the following (you should still
   be in C:\FALCON3\ARMSDATA):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3\MUSIC
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3
      DEL GOPATCH.EXE
      DEL *.RTP
      F30RESET

Falcon 3.0 with MiG-29 ONLY:
---------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\FALCON3 
      COPY REPORT0.RTP C:\FALCON3 
      COPY HORNPAT3.RTP C:\FALCON3 
      COPY GOPATCH.EXE C:\FALCON3\MUSIC 
      COPY GOPATCH.EXE C:\FALCON3\ARMSDATA 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY 303PATCH.RTP C:\FALCON3 
      COPY M102PAT.RTP C:\FALCON3 
      COPY HORNPAT2.RTP C:\FALCON3 
      COPY HORMUSIC.RTP C:\FALCON3\MUSIC 
      COPY 303ARM.RTP C:\FALCON3\ARMSDATA 
5) Insert Disk 3 in drive A.
6) At the A: prompt, type the following:
      COPY HORNPAT1.RTP C:\FALCON3 
      C: 
      CD\FALCON3 
7) You will now be at a C:\FALCON3 prompt. Type the following to
   update to Falcon 3.03:
      GOPATCH REPORT0 
      GOPATCH 303PATCH 
      GOPATCH M102PAT 
      GOPATCH HORNPAT1 
      GOPATCH HORNPAT2 
      GOPATCH HORNPAT3 
      CD MUSIC 
      GOPATCH HORMUSIC 
      CD\FALCON3\ARMSDATA 
      GOPATCH 303ARM 
8) The installation is now complete. Remove the installer files
   from your hard drive by typing the following (you should still
   be in C:\FALCON3\ARMSDATA):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3\MUSIC
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3
      DEL GOPATCH.EXE
      DEL *.RTP
      F30RESET
      MIGRESET

Falcon 3.0 with MiG-29 and Operation: Fighting Tiger:
-----------------------------------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\FALCON3 
      COPY REPORT1.RTP C:\FALCON3 
      COPY HORNPAT3.RTP C:\FALCON3 
      COPY GOPATCH.EXE C:\FALCON3\MUSIC 
      COPY GOPATCH.EXE C:\FALCON3\ARMSDATA 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY 303PATCH.RTP C:\FALCON3 
      COPY ASIAPAT4.RTP C:\FALCON3 
      COPY ASIAPAT5.RTP C:\FALCON3 
      COPY ASIAPAT6.RTP C:\FALCON3 
      COPY M102PAT.RTP C:\FALCON3 
      COPY HORNPAT2.RTP C:\FALCON3 
      COPY HORMUSIC.RTP C:\FALCON3\MUSIC 
      COPY 303ARM.RTP C:\FALCON3\ARMSDATA 
5) Insert Disk 3 in drive A.
6) At the A: prompt, type the following:
      COPY HORNPAT1.RTP C:\FALCON3 
      C: 
      CD\FALCON3 
7) You will now be at a C:\FALCON3 prompt. Type the following to
   update to Falcon 3.03:
      GOPATCH REPORT1 
      GOPATCH 303PATCH 
      GOPATCH ASIAPAT4 
      GOPATCH ASIAPAT5 
      GOPATCH ASIAPAT6 
      GOPATCH M102PAT 
      GOPATCH HORNPAT1 
      GOPATCH HORNPAT2 
      GOPATCH HORNPAT3 
      CD MUSIC 
      GOPATCH HORMUSIC 
      CD\FALCON3\ARMSDATA 
      GOPATCH 303ARM 
8) The installation is now complete. Remove the installer files
   from your hard drive by typing the following (you should still
   be in C:\FALCON3\ARMSDATA):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3\MUSIC
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3
      DEL GOPATCH.EXE
      DEL *.RTP
      F30RESET
      MIGRESET

MiG-29 Stand-Alone ONLY:
------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\MIG29 
      COPY REPORT1.RTP C:\MIG29 
      COPY HORNPAT3.RTP C:\MIG29 
      COPY GOPATCH.EXE C:\MIG29\MUSIC 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY M102PAT.RTP C:\MIG29 
      COPY HORNPAT2.RTP C:\MIG29 
      COPY HORMUSIC.RTP C:\MIG29\MUSIC 
5) Insert Disk 3 in drive A.
6) At the A: prompt, type the following:
      COPY HORNPAT1.RTP C:\MIG29 
      C: 
      CD\MIG29 
7) You will now be at a C:\MIG29 prompt. Type the following to
   update to MiG-29 1.02:
      GOPATCH REPORT1 
      GOPATCH M102PAT 
      GOPATCH HORNPAT1 
      GOPATCH HORNPAT2 
      GOPATCH HORNPAT3 
      CD MUSIC 
      GOPATCH HORMUSIC 
8) The installation is now complete. Remove the installer files
   from your hard drive by typing the following (you should still
   be in C:\MIG29\MUSIC):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\MIG29
      DEL GOPATCH.EXE
      DEL *.RTP
      MIGRESET

MiG-29 Stand-Alone with Operation: Fighting Tiger:
--------------------------------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\MIG29 
      COPY REPORT1.RTP C:\MIG29 
      COPY HORNPAT3.RTP C:\MIG29 
      COPY GOPATCH.EXE C:\MIG29\MUSIC 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY M102PAT.RTP C:\MIG29 
      COPY ASIAPAT4.RTP C:\MGI29 
      COPY ASIAPAT6.RTP C:\MIG29 
      COPY HORNPAT2.RTP C:\MIG29 
      COPY HORMUSIC.RTP C:\MIG29\MUSIC 
5) Insert Disk 3 in drive A.
6) At the A: prompt, type the following:
      COPY HORNPAT1.RTP C:\MIG29 
      C: 
      CD\MIG29 
7) You will now be at a C:\MIG29 prompt. Type the following to
   update to MiG-29 1.02:
      GOPATCH REPORT1 
      GOPATCH M102PAT 
      GOPATCH ASIAPAT4 
      GOPATCH ASIAPAT6 
      GOPATCH HORNPAT1 
      GOPATCH HORNPAT2 
      GOPATCH HORNPAT3 
      CD MUSIC 
      GOPATCH HORMUSIC 
8) The installation is now complete. Remove the installer files
   from your hard drive by typing the following (you should still
   be in C:\MIG29\MUSIC):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\MIG29
      DEL GOPATCH.EXE
      DEL *.RTP
      MIGRESET

Verifying the installation
--------------------------
Once the installation is finished, type "CHECKVER" at the DOS
prompt. You should see the following lines (in addition to other
information, such as whether Operation: Fighting Tiger is
installed and how much memory you have available).
 
   Program       Version     Date       Time      Size
   HORNET.EXE    1.0         12-16-93   08:34p    1390123
   FALCON3.EXE   3.03        12-16-93   08:56p    1372887
   MIG29.EXE     1.02        12-16-93   09:04p    1368519
  
The version number is also shown in the game on the bottom of the
title screen. The version number for Falcon 3.0 should read
"V3.03" after a successful install, while the MiG-29 title screen
should read "V1.02" after installation.

UPDATING WITHOUT HORNET
-----------------------
Disks 1 and 2 contain the files necessary to update any version
of MiG-29 or Falcon 3.0 to the latest version, which is
communications-compatible with Hornet. This updater will update
any version of Falcon 3.0 to 3.03. It will update any version of
MiG-29 to 1.02.

Who can update?
---------------
Any Falcon 3.0 or MiG-29 owner can update. You are encouraged to
distribute copies of Hornet Disks 1 and 2 to other Falcon 3.0 or
MiG-29 owners so they can update to the latest version. Please do 
not distribute Disk 3.

Should I update?
----------------
Yes, if you have any of the following versions of Falcon 3.0:
Falcon 3.0 (no suffix), 3.0a, 3.0c, 3.0d, 3.0e, 3.01 (Operation:
Fighting Tiger), 3.01.1 (Operation: Fighting Tiger update), 3.02
(Falcon 3.0 with MiG-29 add-on) or 3.02.1 (Falcon 3.0 with MiG-29
add-on update).

You should also update if you have MiG-29 versions 1.0, 1.01 or
1.01.1.

Note also that Falcon 3.03 or MiG-29 1.02 is required in order to
communicate with Hornet, MiG-29 1.02 or Falcon 3.03. Earlier
versions will fail to communicate properly with Hornet, MiG-29
version 1.02 or Falcon 3.03.

WARNING: You should complete any campaigns you intend to finish
before updating. The update process deletes all existing squadron
files and replaces them with new ones.
 
OPERATION: FIGHTING TIGER WARNING: Do not attempt to install
Operation: Fighting Tiger after updating to version 3.03! If you
buy Operation: Fighting Tiger after you update to version 3.03,
DELETE EVERYTHING in your FALCON3 directory and reinstall from
scratch (Falcon 3.0 or MiG-29 Stand-Alone, then Operation: 
Fighting Tiger, then the update). See the update instructions
below.

FALCON 3.03/MIG-29 1.02 UPDATE INSTRUCTIONS
-------------------------------------------
The SHUPDATE.EXE program performs the 3.03 update for Falcon 3.0
and brings MiG-29 up to version 1.02. Follow these instructions
carefully. If you have difficulty, you can try the manual update
instructions listed at the end of this file.

These instructions assume your hard drive is drive C, your floppy
drive is drive A and you have installed your game to the FALCON3
directory (or MIG29 directory for the MiG-29 Stand-Alone).

1) Install Falcon 3.0 or the MiG-29 Stand-Alone according to the
   instructions provided with that game (unless it is already
   installed).

2) Install Operation: Fighting Tiger, if you have it, according
   to the instructions provided with that game (unless it is
   already installed). MiG-29 owners should check the MiG-29
   Installation and Loading Card for instructions on adding
   Operation: Fighting Tiger to MiG-29.

3) Install the MiG-29 add-on, if you have it, according to the
   instructions provided with that game (unless it is already
   installed).

4) Insert Hornet Disk 1 into drive A or B.

5) Type "A:" or "B:" to change to your floppy drive.

6) Type "SHUPDATE" at the DOS prompt.

7) The updater will then modify the necessary files to update
   your copy of Falcon 3.0 to Falcon 3.03 and to update MiG-29 to
   version 1.02. You will be asked to insert Hornet Disk 2 during
   this process.

Once the updater is finished, type "CHECKVER" at the DOS prompt.
You should see the following lines (in addition to other
information, such as whether Operation: Fighting Tiger is
installed and how much memory you have available).
 
   Program       Version     Date       Time      Size
   FALCON3.EXE   3.03        12-16-93   08:56p    1372887
   MIG29.EXE     1.02        12-16-93   09:04p    1368519
 
The version number is also shown in the game on the bottom of the
title screen. The version number for Falcon 3.0 should read
"V3.03" after a successful update, while the MiG-29 title screen
should read "V1.02" after updating.

MANUAL UPDATING
---------------
If you are having trouble updating to Falcon 3.03 or MiG-29 1.02,
you can manually perform the update using one of the following
procedures. Follow the instructions appropriate to your setup, as
different files are needed depending on what is already installed
on your system.

ONLY use these instructions if the automatic updater (SHUPDATE)
does not work!

Falcon 3.0, 3.0a, 3.0c or 3.0d ONLY:
------------------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\FALCON3 
      COPY EPATCH.RTP C:\FALCON3 
      COPY REPORT0.RTP C:\FALCON3 
      COPY GOPATCH.EXE C:\FALCON3\ARMSDATA 
      COPY PATCHARM.RTP C:\FALCON3\ARMSDATA 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY 303PATCH.RTP C:\FALCON3 
      COPY 303ARM.RTP C:\FALCON3\ARMSDATA 
      C: 
      CD\FALCON3 
5) You will now be at a C:\FALCON3 prompt. Type the following to
   update to Falcon 3.03:
      GOPATCH EPATCH 
      GOPATCH REPORT0 
      GOPATCH 303PATCH 
      CD ARMSDATA 
      GOPATCH PATCHARM 
      GOPATCH 303ARM 
6) The update is now complete. Remove the update files from your
   hard drive by typing the following (you should still be in
   C:\FALCON3\ARMSDATA):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3
      DEL GOPATCH.EXE
      DEL *.RTP
      F30RESET

Falcon 3.0e, 3.02 or 3.02.1 ONLY:
---------------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\FALCON3 
      COPY REPORT0.RTP C:\FALCON3 
      COPY GOPATCH.EXE C:\FALCON3\ARMSDATA 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY 303PATCH.RTP C:\FALCON3 
      COPY 303ARM.RTP C:\FALCON3\ARMSDATA 
      C: 
      CD\FALCON3 
5) You will now be at a C:\FALCON3 prompt. Type the following to
   update to Falcon 3.03:
      GOPATCH REPORT0 
      GOPATCH 303PATCH 
      CD ARMSDATA 
      GOPATCH 303ARM 
6) The update is now complete. Remove the update files from your
   hard drive by typing the following (you should still be in
   C:\FALCON3\ARMSDATA):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3
      DEL GOPATCH.EXE
      DEL *.RTP
      F30RESET

Falcon 3.0 with Operation: Fighting Tiger 3.01 ONLY:
----------------------------------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\FALCON3 
      COPY CHECKOFT.RTP C:\FALCON3 
      COPY REPORT1.RTP C:\FALCON3 
      COPY GOPATCH.EXE C:\FALCON3\ARMSDATA 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY ASIAPAT5.RTP C:\FALCON3 
      COPY 303PATCH.RTP C:\FALCON3 
      COPY 303ARM.RTP C:\FALCON3\ARMSDATA 
      C: 
      CD\FALCON3 
5) You will now be at a C:\FALCON3 prompt. Type the following to
   update to Falcon 3.03:
      GOPATCH CHECKOFT 
      GOPATCH REPORT1 
      GOPATCH ASIAPAT5 
      GOPATCH 303PATCH 
      CD ARMSDATA 
      GOPATCH 303ARM 
6) The update is now complete. Remove the update files from your
   hard drive by typing the following (you should still be in
   C:\FALCON3\ARMSDATA):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3
      DEL GOPATCH.EXE
      DEL *.RTP
      F30RESET

Falcon 3.0 with Operation: Fighting Tiger 3.01.1 or later ONLY:
---------------------------------------------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\FALCON3 
      COPY REPORT1.RTP C:\FALCON3 
      COPY GOPATCH.EXE C:\FALCON3\ARMSDATA 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY ASIAPAT5.RTP C:\FALCON3 
      COPY 303PATCH.RTP C:\FALCON3 
      COPY 303ARM.RTP C:\FALCON3\ARMSDATA 
      C: 
      CD\FALCON3 
5) You will now be at a C:\FALCON3 prompt. Type the following to
   update to Falcon 3.03:
      GOPATCH REPORT1 
      GOPATCH ASIAPAT5 
      GOPATCH 303PATCH 
      CD ARMSDATA 
      GOPATCH 303ARM 
6) The update is now complete. Remove the update files from your
   hard drive by typing the following (you should still be in
   C:\FALCON3\ARMSDATA):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3
      DEL GOPATCH.EXE
      DEL *.RTP
      F30RESET

Falcon 3.0 with MiG-29 ONLY:
---------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\FALCON3 
      COPY REPORT0.RTP C:\FALCON3 
      COPY GOPATCH.EXE C:\FALCON3\ARMSDATA 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY 303PATCH.RTP C:\FALCON3 
      COPY M102PAT.RTP C:\FALCON3 
      COPY 303ARM.RTP C:\FALCON3\ARMSDATA 
      C: 
      CD\FALCON3 
5) You will now be at a C:\FALCON3 prompt. Type the following to
   update to Falcon 3.03:
      GOPATCH REPORT0 
      GOPATCH 303PATCH 
      GOPATCH M102PAT 
      CD ARMSDATA 
      GOPATCH 303ARM 
6) The update is now complete. Remove the update files from your
   hard drive by typing the following (you should still be in
   C:\FALCON3\ARMSDATA):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3
      DEL GOPATCH.EXE
      DEL *.RTP
      F30RESET
      MIGRESET

Falcon 3.0 with MiG-29 and Operation: Fighting Tiger:
-----------------------------------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\FALCON3 
      COPY REPORT1.RTP C:\FALCON3 
      COPY GOPATCH.EXE C:\FALCON3\ARMSDATA 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY 303PATCH.RTP C:\FALCON3 
      COPY ASIAPAT5.RTP C:\FALCON3 
      COPY ASIAPAT6.RTP C:\FALCON3 
      COPY M102PAT.RTP C:\FALCON3 
      COPY 303ARM.RTP C:\FALCON3\ARMSDATA 
      C: 
      CD\FALCON3 
5) You will now be at a C:\FALCON3 prompt. Type the following to
   update to Falcon 3.03:
      GOPATCH REPORT1 
      GOPATCH 303PATCH 
      GOPATCH ASIAPAT5 
      GOPATCH ASIAPAT6 
      GOPATCH M102PAT 
      CD ARMSDATA 
      GOPATCH 303ARM 
6) The update is now complete. Remove the update files from your
   hard drive by typing the following (you should still be in
   C:\FALCON3\ARMSDATA):
      DEL GOPATCH.EXE
      DEL *.RTP
      CD\FALCON3
      DEL GOPATCH.EXE
      DEL *.RTP
      F30RESET
      MIGRESET

MiG-29 Stand-Alone ONLY:
------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\MIG29 
      COPY REPORT1.RTP C:\MIG29 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY M102PAT.RTP C:\MIG29 
      C: 
      CD\MIG29 
5) You will now be at a C:\MIG29 prompt. Type the following to
   update to MiG-29 1.02:
      GOPATCH REPORT1 
      GOPATCH M102PAT 
6) The update is now complete. Remove the update files from your
   hard drive by typing the following:
      CD\MIG29
      DEL GOPATCH.EXE
      DEL *.RTP
      MIGRESET

MiG-29 Stand-Alone with Operation: Fighting Tiger:
--------------------------------------------------
1) Insert Disk 1 in drive A.
2) At the A: prompt, type the following:
      COPY GOPATCH.EXE C:\MIG29 
      COPY REPORT1.RTP C:\MIG29 
3) Insert Disk 2 in drive A.
4) At the A: prompt, type the following:
      COPY M102PAT.RTP C:\MIG29 
      COPY ASIAPAT6.RTP C:\MIG29 
      C: 
      CD\MIG29 
5) You will now be at a C:\MIG29 prompt. Type the following to
   update to MiG-29 1.02:
      GOPATCH REPORT1 
      GOPATCH M102PAT 
      GOPATCH ASIAPAT6 
6) The update is now complete. Remove the update files from your
   hard drive by typing the following:
      CD\MIG29
      DEL GOPATCH.EXE
      DEL *.RTP
      MIGRESET

Verifying the update
--------------------
Once the update is finished, type "CHECKVER" at the DOS prompt.
You should see the following lines (in addition to other
information, such as whether Operation: Fighting Tiger is
installed and how much memory you have available).
 
   Program       Version     Date       Time      Size
   FALCON3.EXE   3.03        12-16-93   08:56p    1372887
   MIG29.EXE     1.02        12-16-93   09:04p    1368519
 
The version number is also shown in the game on the bottom of the
title screen. The version number for Falcon 3.0 should read
"V3.03" after a successful update, while the MiG-29 title screen
should read "V1.02" after updating.

