Running the game

        You'll need about 8 meg of free hard drive space when you run
the game.  Simply type "cave" to start it up.  If you are running from
a system with more than 8 meg of RAM, and the game seems at all slow,
or performs disk access too often for your taste, typing "cavehigh"
might speed it up somewhat.  Do not use cavehigh on a system with 8 meg
of RAM or less.

        If you get the message "Out of environment space" when running
"cave", it generally means that DOS has run out of space to define system
variables.  To remedy this, comment out or remove unnecessary SET commands in
autoexec.bat; if you're unsure, create a clean boot disk with only the
necessary drivers(mouse, VESA, cd-rom) and the SET BLASTER command.

Refer to avalon.txt for a description of Avalon Hill products on the CD-ROM.


                         *TROUBLESHOOTING*

Configuration Details

        The game requires a few things to be in your config.sys and
autoexec.bat files.  First of all, you will need to load a mouse driver.
Second, if your video card doesn't have hardware compliance with VESA 1.2 or
later, you'll need to load a software driver that provides it.
We have found that the ATI MACH 32 card requires this.  UniVBE, by
SciTech, is one such driver.  It is available electronically from
ftp.scitechsoft.com, or call SciTech at 1-800-4UNIVBE.  Some cards may
have their own VESA driver software.  Consult your video card
documentation.  You will need the following line in your config.sys
file:

FILES=15     (A number bigger than 15 is also fine.)

The BLASTER environment variable in autoexec.bat must be set properly
for sound to work (this is necessary even for GUS emulators to function
properly).  If you are using a Sound Blaster card, you can use the DIAGNOSE
utility to set the BLASTER variable automatically.  The IRQ for your soundcard
must be 7 or under.  A line similar to the following must be present in
your autoexec.bat file:

SET BLASTER=A220 I5 D1

Note that expanded memory managers, such as QEMM or emm386 may slow the game
down.

Sound
-----

Before you run Cavewars, be sure that your sound card is configured on
IRQ 7 or below. To get music, your CD-ROM must be connected to your
sound card via the audio cable.  The BLASTER environment variable must
be set in autoexec.bat.

For Gravis users it is necessary to use a software emulator to enable
sound.  We have found IWSBOS to be easier to use.  On installation
Gravis defaults to IRQ 11, which will not work.  Both the Gravis IRQ
and the Soundblaster IRQ must be set to 7 or less.  This can be done in
the Gravis setup program.

Win95 Users
-----------

Cavewars runs in a DOS box without a reboot.  The default properties
should work.  If the game behaves strangely, you may want to create a
new shortcut to MS-DOS using the default properties.  If you create a
shortcut for Cavewars itself, make sure you include the Cavewars
directory as the working directory in the Properties box.

Be sure that the Win95 audio CD player's Autoplay option is turned
off before you run Cavewars.  This is not always necessary, but some
video cards will have a tendency to cause video corruption when the
Win95 audio CD player is loaded.  To turn Autoplay off:

        1. Double-click on the My Computer icon in the Win95 desktop.
        2. In the View menu, click Options.
        3. Click the File Type tab.
        4. Select the CD Audio type.
        5. Click on the word Play in the lower part of the window to
           toggle Autoplay.  Boldface means that Autoplay is on.

Also, some systems may require you to disable the Windows screen saver
if you plan on leaving the game unattended.  Consult your Windows
documentation for instructions on how to do this.

If you wish to play Cavewars in DOS mode (with a reboot), be sure that
all the necessary drivers (MSCDEX, mouse, disk caching software) are
loaded.  Note that Cavewars will suffer a large performance hit if no
disk-caching software is loaded.



