/*
 * INSTALL.DAT
 *
 * Project: Silverball Plus 2
 * Version: 1.0
 *
 * This INSTALL.DAT was generated by ddb, with a little help from its
 * Andy Lebeis.
 */

@DefineProject
	@Name = "Silverball Plus 2"
	@Version = "1.0"
	
    @Subdir = "\\SILVER"
    @OutDrive = C

    @Requires @HardDisk

@EndProject

@Display
	@Cls

	This program will install:
	@Name version @Version
	on your computer system and verify the integrity of the
	distribution disk(s).  You may press the [Esc] key at any time to
	abort the installation.

	INSTALL will ask you several questions about your computer
    hardware.  Each question has a default answer.  If the default
    answer is correct, press the ENTER key in response to the question.
    Otherwise, type the answer and then press the ENTER key.

	If you make a mistake while typing, press the BACKSPACE key
	and then retype the answer.

	@Pause
@EndDisplay


@If (@RamTotal < 640K)
   @Display
      @Cls
      This machine does not have enough RAM
      to run the @Name game.


       RAM Installed (in bytes): @RAMTotal


      Total Conventional RAM memory must total 640K.

      Press  [ESC]  to abort installation.

      @Pause
   @EndDisplay
@EndIf

@If (@RamAvail < 570000)
   @Display
      @Cls

       RAM Available (in bytes): @RAMAvail

           ****** Warning ******

     This machine presently does not have enough RAM
     available to run the @Name game.

           *********************

      You may continue with the installation, but before running,
      please remove TSR's and DOS options from your
      Config.sys/Autoexec.bat files to obtain the required
      570,000 bytes before attempting to run this program.
      See the trouble shooting section of the game manual for details,
      or type HELPME [ENTER] after completing the installation.

      @Pause
   @EndDisplay
@EndIf

@If (@VideoCard != 'V')
   @Display
      @Cls
	      The current video mode number: @VideoMode
			 Video adapter card: @If(@VideoCard == 'M') MONO @ElseIf
			(@VideoCard == 'C') COLOR @ElseIf
			(@VideoCard == 'V') VGA @ElseIf
			(@VideoCard == 'E') EGA @EndIf
			      Video display: @If(@VideoMonitor == 'C') COLOR @ElseIf
		       (@VideoMonitor == 'M') MONO @ElseIf
		       (@VideoMonitor == 'H') ENHANCED @EndIf
		 The amount of video RAM is: @VideoRAM K
    The highest resolution graphics mode is: @VideoGraph
 
 
		   ****** Warning ******
 
      This machine does not have a VGA adapter.
      @Name game
      will not run on this machine.
 
      Press  [ESC]  to abort installation.
 
      @Pause
   @EndDisplay
@EndIf
 
@SetConfig
   @AskOverwrite
   @Files = 20
@EndConfig
 
@GetOutDrive
	@Cls

	On which disk drive do you wish to install @Name?

    @Suppress A
    @Suppress B











@EndOutDrive

@GetSubdir
	@Cls
    Now you need to specify the disk destination subdirectory.  The
    subdirectory is the location on your disk where the @Name
    system will be installed.  If you don't know what a "subdirectory"
    is, you probably need not worry about it, and should press ENTER.



    @Prompt = "Which subdirectory ([Enter] = @Subdir) ?"
@EndSubdir


@If (@DiskFree @OutDrive < 3450000)
   @Display
	 @Cls
	 The selected output disk drive only has
	 @DiskFree @OutDrive bytes.

     3,450,000 bytes need to be available
     to store the @Name game files.
 
	 @Pause
	 @Abort
   @EndDisplay
@EndIf


@DefineDisk
	@Label = "Disk #1"
	@BeginLib DDB.001
		@File PIN6.EXE @Size 237517 @Out PIN6.EXE
		@File HELPME.EXE @Size 5552 @Out HELPME.EXE
		@File SONG0.PSM @Size 98644 @Out SONG0.PSM
		@File INTRO.PIN @Size 121490 @Out INTRO.PIN
		@File SETUP.EXE @Size 11490 @Out SETUP.EXE
		@File PIN4.DAT @Size 49909 @Out PIN4.DAT
		@File PIN6.DAT @Size 40189 @Out PIN6.DAT
		@File PIN7.DAT @Size 42504 @Out PIN7.DAT
		@File PIN12.EXE @Size 226795 @Out PIN12.EXE
		@File SONG1.PSM @Size 55412 @Out SONG1.PSM
		@File SONG2.PSM @Size 140052 @Out SONG2.PSM
		@File HELPME.DOC @Size 4234 @Out HELPME.DOC
		@File SONG4.PSM @Size 146468 @Out SONG4.PSM
		@File SONG6.PSM @Size 45892 @Out SONG6.PSM
		@File SONG7.PSM @Size 109684 @Out SONG7.PSM
		@File SF0.PIN @Size 62965 @Out SF0.PIN
		@File SF1.PIN @Size 77811 @Out SF1.PIN
		@File SF4.PIN @Size 48700 @Out SF4.PIN
		@File SF6.PIN @Size 79788 @Out SF6.PIN
		@File SF7.PIN @Size 99116 @Out SF7.PIN
		@File LPR.INF @Size 5101 @Out LPR.INF
		@File GUS.INF @Size 3397 @Out GUS.INF
		@File SB.INF @Size 4174 @Out SB.INF
		@File LOADER.INF @Size 1171 @Out LOADER.INF
		@File PIN9.EXE @Size 237545 @Out PIN9.EXE
		@File PIN4.EXE @Size 222151 @Out PIN4.EXE
		@File PIN7.EXE @Size 244170 @Out PIN7.EXE
		@File PIN1.DAT @Size 38602 @Out PIN1.DAT
		@File INF.DAT @Size 9732 @Out INF.DAT
		@File PIN1.EXE @Size 299649 @Out PIN1.EXE
		@File PIN9.DAT @Size 37495 @Out PIN9.DAT
		@File PIN12.DAT @Size 38654 @Out PIN12.DAT
		@File SF9.PIN @Size 57062 @Out SF9.PIN
	@EndLib
@EndDisk


@DefineDisk
	@Label = "Disk #2"
	@BeginLib DDB.002
		@File SF9.PIN @AppendTo SF9.PIN
		@File SF12.PIN @Size 21340 @Out SF12.PIN
		@File SONG9.PSM @Size 126612 @Out SONG9.PSM
		@File SONG12.PSM @Size 95460 @Out SONG12.PSM
		@File SILVER.EXE @Size 43200 @Out SILVER.EXE
		@File LICENSE.DOC @Size 755 @Out LICENSE.DOC
		@File FILE_ID.DIZ @Size 251 @Out FILE_ID.DIZ
		@File DUEL.DOC @Size 1259 @Out DUEL.DOC
		@File WARBOT.DOC @Size 2303 @Out WARBOT.DOC
		@File PIN3.EXE @Size 254579 @Out PIN3.EXE
	@EndLib
@EndDisk


@Finish
    @Copy ("@InDrive:\\readme.doc","@OutDrive:\\@SubDir\\readme.doc")
    @Copy ("@InDrive:\\readme.bat","@OutDrive:\\@SubDir\\readme.bat")
    @ChDrive @OutDrive
	@ChDir "@SubDir"

	Installation of @Name is now finished.

    For information on Warbot and Duel, refer to the Warbot.doc
    and Duel.doc files in the @OutDrive:@SubDir directory.

    They may be viewed by any text editor (including DOS "EDIT")
    or printed by typing      "PRINT DUEL.DOC      [ENTER]" and
                              "PRINT WARBOT.DOC    [ENTER]"

    For additional features of Silverball Plus 2 not found in the
    Silverball manual, type "README" at the @OutDrive:@SubDir> prompt.

    If you have sound problems, or problems running the software, type
    "HELPME" at the @OutDrive:@SubDir> prompt.

	@Pause

    @Execute("SETUP")
    @Cls



    Setup program not found on @Outdrive:@Subdir





    @Pause
@EndFinish

/* end-of-file */
