                ** Cabri Geometry II for DOS DEMO **

Thank you for evaluating Cabri Geometry II. For general information,
and purchase assistance, contact Texas Instruments directly:
     Call:    1-800-TI-CARES
     E-mail:  ti-cares@ti.com
     WWW:     http://www.ti.com/calc

This demo software is time-limited to 30 minutes for each of the 
first ten sessions. The next ten sessions are limited to 20 minutes 
each and thereafter each session is limited to 10 minutes. Output
functions such as Save, Print, Cut, Copy and Paste are also disabled.

SYSTEM REQUIREMENTS
-------------------
Cabri Geometry II for DOS requires the following:
- DOS-compatible computers (PCs), 386 or better, and running
  MS-DOS 3.3 or later.
- EGA, VGA, SVGA video adapter and a color monitor.
- 2 MB available RAM.
- Hard disk with 2.5 MB available for program and demonstration files.
- Mouse, or an equivalent pointing device.

INSTALLATION
------------
To install Cabri Geometry II for DOS to run from the DOS prompt or
under Windows:
1. Insert the Cabri II DOS DEMO diskette in your floppy disk drive.
2. At the DOS prompt, enter:
   A:\INSTALL or B:\INSTALL, and then follow the screen prompts.
   NOTE: If you are working in Windows, go to a DOS prompt before
   performing step 2.

CONFIGURING FOR WINDOWS 3.1:
---------------------------
1. From Program Manager, open the Program Group where you want the
   Cabri II icon to reside.
2. Select File, New, and then Program Item. Click on OK.
3. Complete the dialog entries as follows:
    Description:        Cabri Geometry II
    Command Line:       C:\CABRI\CABRI.PIF
    Working Directory:  C:\CABRI
4. Select Change Icon and click on OK.
5. Type C:\CABRI\CABRI.ICO and double-click on OK.

CONFIGURING FOR WINDOWS 95:
---------------------------
1. In Explorer, highlight CABRI2.EXE in C:\CABRI.
2. Right click and select Properties. We suggest the following property
   settings:
    Program:                                Memory:
     Cmd line: c:\cabri\cabri2.exe           Conventional: auto, auto
     Run: Maximized                          EMS: none
     Close on Exit: select                   XMS: auto, 2048 (minimum)
                                             DPMI: auto, 2048 (minimum)
    Screen:
     Full Screen: select
3. Click on the Program tab and select Change Icon.
4. Enter C:\CABRI\CABRI.ICO, and then click on OK as necessary until
   you return to Explorer.
5. Right click on Start and select Open.
6. Drag the Cabri II shortcut icon from Explorer to an existing folder
   or create a new folder.


STARTING CABRI GEOMETRY II IN DOS
---------------------------------
To open the application after the installation is complete, enter
"cabri" at the DOS prompt from your Cabri directory. For example, 
C:\CABRI>cabri [Enter].

Since Cabri requires a mouse, ensure that a mouse driver has been 
loaded prior to running the program. If your mouse does not respond, 
enter CTRL Q from the keyboard to quit the program and correct the
problem.


PROGRAM FILES
-------------
Path:  c:\cabri
Includes all necessary Cabri Geometry II program files.


EXAMPLE FIGURES
---------------
Path:  c:\cabri\figures
Includes example constructions which illustrate a variety of features 
from Cabri Geometry II.


EXAMPLE MACROS
--------------
Path:  c:\cabri\macros
Includes several examples of macros -- sequences of interdependent
constructions. Select Help and a macro to display information about 
the macro's use.

**END OF README**
